Használati útmutató Extech AUT500
Extech
multiméter
AUT500
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extech AUT500 (18 oldal) a multiméter kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/18
USER GUIDE
Automotive Multimeter
MODEL AUT500
AUT500-EU-EN v1.0 5/13
2
Introduction
Thank you for selecting the Extech AUT500 Automotive Multimeter. The AUT500 is an Auto Range
Multimeter that measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency,
Diode, Continuity, RPM, Dwell, and Duty Cycle. The AUT500 also measures contact temperature via
supplied Thermocouple probe.
The AUT500 features a rugged design for heavy duty use. This device is shipped fully tested and
calibrated and, with proper use, will provide years of reliable service. Please visit our website
(www.extech.com) to check for the latest version of this User Guide, Product Updates, and Customer
Support.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation
This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be
connected to a circuit point at which the voltage with respect to earth ground
exceeds (in this case) 600 VAC or VDC.
CAUTIONS
Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery or fuses.
Inspect the condition of the test leads and the meter itself for any damage before operating the
meter. Repair any damage or replace the unit before use.
Use great care when making measurements if the voltages are greater than 25VAC rms or
35VDC. These voltages are considered a shock hazard.
Always discharge capacitors and remove power from the device under test before performing
Diode, Resistance or Continuity tests.
Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty
of connection to the recessed electrical contacts. Other means should be used to ensure that
the terminals are not "live".
WARNING
CAUTION
MAX
600V
AUT500-EU-EN v1.0 5/13
3
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
This device is not a toy and must not reach children’s hands. It contains hazardous objects as
well as small parts that the children could swallow. In case a child swallows any of them,
please contact a physician immediately
Do not leave batteries and packing material lying around unattended; they can be dangerous
for children if they use them as toys
In case the device is going to be unused for an extended period of time, remove the batteries
to prevent them from training
Expired or damaged batteries can cause cauterization on contact with the skin. Always,
therefore, use suitable hand gloves in such cases
See that the batteries are not short-circuited. Do not throw batteries into the fire.
DANGERS
Engines produce carbon monoxide which is odor reaction time, and can less, causes slower
lead to serious injury. When the engine is operating keep service areas well ventilated or
attach the vehicle exhaust system to the shop exhaust removal system.
Set the parking brake and block the wheels before testing or repairing the vehicle. It is
especially important to block the wheels on front-wheel drive vehicles; the parking brake does
not hold the drive wheels.
Wear an eye shield when testing or repairing vehicles.
Keep the meter away from spark plug and coil wires.
Exceeding the limits of this meter is dangerous. This will expose you to serious or possibly fatal
injury. Carefully read and understand the cautions and the specification limits of this meter.
Avoid electrical shock; do not touch the test leads, tips, or the circuit under test.
Do not try a voltage measurement with the test leads in the 20A or the mA terminal.
Choose the proper range and function for the measurement. Do not try voltage or current
measurements that may exceed the ratings marked on the Function/Range switch or terminal.
When measuring current, connect the meter in series with the load.
Never connect more than one set of test leads to the meter.
Disconnect the live test lead before disconnecting the common test lead.
The mA and the 20A terminals are protected by fuses. To avoid possible injury or damage, use
only in circuits limited to 400mA.
Termékspecifikációk
| Márka: | Extech |
| Kategória: | multiméter |
| Modell: | AUT500 |
Szüksége van segítségre?
Ha segítségre van szüksége Extech AUT500, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók multiméter Extech
23 December 2024
19 Szeptember 2024
30 Augusztus 2024
25 Augusztus 2024
25 Augusztus 2024
25 Augusztus 2024
20 Augusztus 2024
15 Augusztus 2024
12 Augusztus 2024
11 Augusztus 2024
Útmutatók multiméter
- multiméter PeakTech
- multiméter Milwaukee
- multiméter Parkside
- multiméter Maxwell
- multiméter Emos
- multiméter Voltcraft
- multiméter Vimar
- multiméter Digitus
- multiméter GW Instek
- multiméter Owon
- multiméter Aim TTi
- multiméter Gossen Metrawatt
- multiméter Amiko
- multiméter Klein Tools
- multiméter Chauvin Arnoux
- multiméter Workzone
- multiméter Beha-Amprobe
- multiméter Qian
- multiméter Joy-It
- multiméter Gembird
- multiméter Testo
- multiméter Powerfix
- multiméter Biltema
- multiméter BaseTech
- multiméter REV
- multiméter BENNING
- multiméter Alecto
- multiméter Yato
- multiméter Velleman
- multiméter TFA
- multiméter Monacor
- multiméter Elro
- multiméter Fluke
- multiméter Uni-T
- multiméter Metrix
- multiméter Abus
- multiméter Megger
- multiméter Testboy
- multiméter Sonel
- multiméter Wiha
- multiméter Schneider
- multiméter Kyoritsu
- multiméter Brandson
- multiméter Stanley
- multiméter Silverline
- multiméter Rigol
- multiméter Projecta
- multiméter Multimetrix
- multiméter Weidmüller
- multiméter Laserliner
- multiméter Appa
- multiméter Amprobe
- multiméter Brennenstuhl
- multiméter Ferm
- multiméter Tacklife
- multiméter Somogyi
- multiméter Profile
- multiméter Steren
- multiméter Perel
- multiméter Flir
- multiméter Proline
- multiméter Hager
- multiméter Topcraft
- multiméter Clas Ohlson
- multiméter Plieger
- multiméter Jung
- multiméter Etekcity
- multiméter Cablexpert
- multiméter Greenlee
- multiméter Högert
- multiméter Wago
- multiméter Bruder Mannesmann
- multiméter Keithley
- multiméter Metrel
- multiméter Digi-tool
- multiméter Skandia
- multiméter Elma
- multiméter Hubinont
- multiméter Kewtech
- multiméter Strex
- multiméter Mastech
- multiméter MBS
- multiméter MGL Avionics
- multiméter PCE Instruments
- multiméter Micronta
- multiméter CEM
- multiméter Horex
- multiméter Cosinus
- multiméter Kurth Electronic
- multiméter Testec
- multiméter IWH
- multiméter Weltron
- multiméter Sanwa
- multiméter Rohde & Schwarz
- multiméter EEVBlog
- multiméter Kingcraft
- multiméter HT Instruments
- multiméter Caltek
- multiméter Elworks
- multiméter Bearware
- multiméter Noyafa
Legújabb útmutatók multiméter
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
28 Március 2025
26 Március 2025
14 Január 2025