Használati útmutató ESQ Analog Chronograph with Alarm

ESQ óra Analog Chronograph with Alarm

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ESQ Analog Chronograph with Alarm (1 oldal) a óra kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/1
Operating Instructions
Analog Chronograph with Alarm
1 2 3
H
E
C
D L
B
A
M
S
G
To activate/deactivate alarm:
Use push-button Cto toggle alarm on and off:
Two audible beeps indicate Alarm function is turned on; one beep
signals Alarm is turned off.
When Alarm sounds at set time, press button Cto stop beeping.
Chronograph Function Overview
Use push-buttons Aand Bto operate the chronograph.
NOTE: After 5-1/2 hours of continuous running, chronograph will
stop and reset automatically to conserve battery.
IMPORTANT: Crown must be in position 1 and hands must be at
zero before chronograph is started. If necessary, press button B
to reset hands to zero before beginning timing.
IMPORTANT: Do not push button Aor Bwhile crown is pulled to
position 2 or 3. If button Aor Bis accidentally activated while crown
is not flush against case, one or more of the chronograph hands will
become desynchronized. Should this occur, see directions below for
synchronizing hands.
Simple chronograph functions:
To measure the duration of a single, non-stop event:
1. Press button Ato start chronograph.
2. Press button Aa second time to stop chronograph, read
chronograph hands Eand Gto determine elapsed time.
3. Press button Bto reset chronograph to zero.
Split-time or intermediate time functions:
To take intermediate time readings as a race progresses:
1. Press button Ato start chronograph.
2. Press button Bto momentarily stop chronograph.
3. Read off the intermediate time.
4. Press button Bto resume chronograph function.
Hands will catch up with ongoing event.
5. To read a second split time, press button Bagain.
Repeat steps 2 through 4 to take any additional split times.
6. Press button Ato stop chronograph.
7. Take a reading of the final time.
8. Press button Bto reset chronograph hands to zero.
Synchronizing hands on Analog Chronograph with Alarm:
After changing the battery, or in the event of an error, the
chronograph hands can be realigned to zero if needed.
With crown in position 1, flush against case:
1. Press and hold buttons Aand Bsimultaneously for approximately
2 seconds to enter corrective mode.
2. Use button Bto realign chronograph minute counter hand E.
3. Use button Ato realign chronograph seconds hand G.
4. Press and hold buttons Aand Bsimultaneously to exit corrective
mode, with 2 chronograph hands now properly synchronized
at 12 o’clock/zero position.
Legend:
L - Alarm hand (12-hour)
H - Hour hand
M - Minute hand
S - Small seconds hand
E - Chronograph 30-minute counter
G - Chronograph seconds hand
D - Date window
1, 2, 3 - Crown positions
A - Chronograph push-button (start/stop)
B - Chronograph push-button (split/reset)
C - Alarm on/off push-button
A chronograph combines two time-keeping functions. It incorporates
a device to measure intervals of time independent of the regular time
shown on the dial. Your ESQ SWISS Analog Chronograph with Alarm
features a 30-minute counter, 12-hour alarm, and date display. It can
be used to time events up to 5 hours and 30 minutes in duration to
the nearest second.
To set the time:
1. Pull crown out to position 3.
2. Rotate crown in either direction to move hour Hand minute
Mhands to correct time.
3. Push crown back in to position 1.
To set the date:
CAUTION: Never set the date between 9:00 PM and 12:30 AM
when automatic calendar changes are taking place. Doing so could
damage the mechanism.
1. Pull crown out to position 2.
2. Rotate crown clockwise until correct date appears in window D.
3. Push crown back in to position 1.
To set alarm:
1. Pull crown out to position 2.
2. Turn crown counterclockwise until alarm hand Lis pointing to
desired time on bezel.
3. Push crown back in to position 1.

Termékspecifikációk

Márka: ESQ
Kategória: óra
Modell: Analog Chronograph with Alarm

Szüksége van segítségre?

Ha segítségre van szüksége ESQ Analog Chronograph with Alarm, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók óra ESQ

ESQ

ESQ Pipeline with Tide Movement Útmutató

14 Augusztus 2024
ESQ

ESQ Beacon Chronograph Útmutató

10 Augusztus 2024
ESQ

ESQ Aston Chronograph Útmutató

9 Augusztus 2024
ESQ

ESQ Quest Retrograde Útmutató

9 Augusztus 2024
ESQ

ESQ Analog - Digital Chronograph Útmutató

8 Augusztus 2024
ESQ

ESQ Analog Chronograph with Alarm Útmutató

8 Augusztus 2024

Útmutatók óra

Legújabb útmutatók óra

Teesa

Teesa TSA0048 Útmutató

3 Április 2025
Teesa

Teesa TSA0036 Útmutató

3 Április 2025
Casio

Casio EFR-571DB Útmutató

30 Március 2025
Citizen

Citizen Zenshin Three-hand AW0130-85A Útmutató

26 Március 2025
Citizen

Citizen Weekender BM8595-16H Útmutató

26 Március 2025
Casio

Casio Collection LTP-2069L-7A2VEF Útmutató

23 Március 2025
Casio

Casio Edifice EFS-S560DB-1AVUEF Útmutató

23 Március 2025
Casio

Casio Edifice EFR-564D-1AVUEF Útmutató

23 Március 2025
Casio

Casio EQB-700D-1AER Útmutató

23 Március 2025
Casio

Casio GA-100L-8ADR Útmutató

23 Március 2025