Használati útmutató Escort MAX 360c

Escort detektor MAX 360c

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Escort MAX 360c (10 oldal) a detektor kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
Settings & Preferences
Press and hold the SEN and BRT buttons to access Preferences. To exit Preferences, simply wait a few
seconds without pressing a button. The unit will display to conrm your selections.Completed
7
Press SEN to go from Press VOLUME + or – to change
one category to the next your setting within a category
User Mode Access and customize all Settings and Preferences Advanced*
Novice Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to advance mode to view all Preferences.
Pilot Scan Bar* Scanning Bar with Full Word
Full Word Full Word: Auto, Auto NoX, AutoLoK or Highway
Arrow Mode Displays a single threat-direction arrow only for the primary alertSingle*
Multiple Displays threat-direction arrows for multiple alerts
Band
Displays color-coded threat-direction arrows for multiple alert bands
X = green, K = blue, Ka/Laser = red
Display Color Set color to match your vehicles dash displayBlue*/Green/Red/Amber
Speed Display Displays current speedOn*
O Displays battery voltage
Cruise Alert Oers double beep alert tones below specied speed20 mph*
O / 20-160 mph
Over Speed Reminds you when you exceed a specied speed70 mph*
O / 20-160mph
Over Speed Limit Speed Limit*
Reminds you when you reach specied speed at or over the speed limit
O / Speed Limit / 5 Over / 7 Over / 10 Over / 15 Over
Meter Mode Displays primary alert band with front signal strength bar graphStandard
Standard FR1* Displays primary alert band with front and rear signal strength
bar graphs
Standard FR2 Displays primary and secondary alert bands with front and rear
signal strength bar graphs
Spec FR1 Displays primary alert band with numeric frequency and front and
rear signal strength bar graphs
Spec FR2 Displays primary alert band with numeric frequency, secondary alert
band, and front and rear signal strength bar graphs
Expert FR Displays up to four alert bands with front and rear signal strength
bar graphs for each
Simple Simple messages replace alert band and signal strength bar graphs:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones Standard* Standard alert tones
Standard+ Standard alert tones for primary alert and
double-beep tones for additional alerts
Mild Mild doorbell chime alert tones
AutoMute Low / Med* / High / O Automatically reduces audio to preferred volume during alert
AutoLearn On* / O Automatically stores and locks out false alarms
Units English* / Metric Units for distance and speed
Language English* / Espanol Language for voice and text
Voice On* / O Voice announcements
GPS Filter Enables GPS-powered featuresOn* / O
AutoPower O Power turns on or o depending on your vehicle’s ignition
type (constant power or switched)
1 Hour Powers o automatically after 1 hour
2 Hours Powers o automatically after 2 hours
4 Hours* Powers o automatically after 4 hours
8 Hours Powers o automatically after 8 hours
NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. Display screen will turn on automatically after you reach 10MPH.
Band Enables Default SettingsDefault*
Modied Band Enables have been modied from their default settings
Press BRT to go from one Press VOLUME + or – to change
Band category to the next your setting within a category
X Band On* / O
K Band Freq: 24.050 – 24.250 GHzOn* / O
NOTE: When K Band is o, you can select separate segments of the band to turn on or o.
KN1 On* / O Freq: 24.050 - 24.110 GHz
KN2 On* / O Freq: 24.110 - 24.175 GHz
KN3 On* / O Freq: 24.175 - 24.250 GHz
KN4 On / O* Freq: 23.950 - 24.050 GHz
Ka Band Freq: 33.400-36.000 GHzOn* / O
NOTE: When Ka Band is o, you can select separate segments of the band to turn on or o.
KaN1 On / O* On / O* Freq: 33.400 - 33.700 GHz KaN6 Freq: 34.800 - 35.160 GHz
KaN2 On / O* Freq: 33.700 - 33.900 GHz KaN7 On / O* Freq: 35.160 - 35.400 GHz
KaN3 On* / O On* / O Freq: 33.900 - 34.200 GHz KaN8 Freq: 35.400 - 35.600 GHz
KaN4 On* / O On / O* Freq: 34.200 - 34.600 GHz KaN9 Freq: 35.600 - 35.840 GHz
KaN5 On */ O On / O* Freq: 34.600 - 34.800 GHz KaN10 Freq: 35.840 - 36.000 GHz
Ka-POP On / O*
Laser On* / O
TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms
Marker Enables Default* Default Settings
Modied Marker Enables have been modied from their default settings
NOTE: AutoPower only works with
constant power ignition.
8
9
Notes for Settings & Preferences
For descriptions of features and functions available when connected to ESCORT Live, visit EscortRadar.
com and download the MAX 360c Owner’s Manual.
To view serial number and software revision press MRK and MUTE while powering on detector.
To restore MAX 360c to its original factory Settings, press and hold MRK and BRT while turning the power
on. A “Restored” message will display, acknowledging the reset.
Software Updates
In its factory default settings MAX 360c automatically receives software updates from your connected
vehicle’s Wi-Fi network. See Using Wi-Fi Connect on page 6 for connection instructions.
The MAX 360c operating rmware and red light and speed camera database can also be updated using a
USB A/Mini B cable (not included) connected to a computer using our detector software tools found on
our web site. In order to have access to these updates, please register your MAX 360c at www.
EscortRadar.com
Press BRT to go from one Press VOLUME + or – to change
Marker category to the next your setting within a category
Other On* /O Other location
Redlight On* / O Red light camera
Red & Speed Red light & speed cameraOn* / O
Speed Cam Speed cameraOn* / O
Speed Trp On* / O Speed trap
Air Patrol Known aircraft patroled areas On / O*
NOTE: User cannot mark an air patrol location.
Clear Locations Clear all user Marked locations. Press MUTE button to conrm Marked
Lockouts Clear all lockouts. Press MUTE button to conrm
Defender Clear all DEFENDER data. Press MUTE button to conrm
Format Clear DEFENDER database, all markers, and all lockouts
Press MUTE button to conrm
Wi-Fi On* /O Turns Wi-Fi Connect on or o
Bluetooth On* / O Turns Bluetooth on or o
Auto Update Automatically checks for selected updates when detector is powered onO/Defender/
Software/All*
Perform Update Perform Defender update. Press MUTE to conrmDefender
Software Perform Software update. Press MUTE to conrm
*Default Setting

Termékspecifikációk

Márka: Escort
Kategória: detektor
Modell: MAX 360c

Szüksége van segítségre?

Ha segítségre van szüksége Escort MAX 360c, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók detektor Escort

Escort

Escort MAX 4 Útmutató

3 Szeptember 2024
Escort

Escort X80 Útmutató

16 Augusztus 2024
Escort

Escort Solo S4 Útmutató

14 Augusztus 2024
Escort

Escort MAX 360c Útmutató

12 Augusztus 2024
Escort

Escort MAXcam 360c Útmutató

11 Augusztus 2024
Escort

Escort Solo S2 Útmutató

9 Augusztus 2024
Escort

Escort Passport Útmutató

9 Augusztus 2024

Útmutatók detektor

Legújabb útmutatók detektor

Velleman

Velleman HAM222 Útmutató

9 December 2024
IFM

IFM OW1010 Útmutató

6 December 2024
Sauter

Sauter SP 200K Útmutató

6 December 2024
Alecto

Alecto HA-58 Útmutató

3 Október 2024
Amprobe

Amprobe ULD-400-T Útmutató

30 Szeptember 2024
Hager

Hager EE809 Útmutató

21 Szeptember 2024
Denver

Denver MET-110 Útmutató

14 Szeptember 2024