Használati útmutató Ergotron Neo-Flex

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ergotron Neo-Flex (6 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
888-28-022-00 rev.A • 5/05
1 of 6
A
1
3
4
2x #8-32
M4 x 10mm
M4 x 10mm
75-100mm
8x
8x
8x
3/32"
8-32 x 5/16"
Neo-Flex Dual Display
Wall Mount
User's Guide
USA 1-800-888-8458
Europe +31 (0)33-45 45 600
2
1
1/2"
1/2"
1/8"
set screw
set screw
1x 2x 1x
1x
2x 8x
8x
2x 4x
IMPORTANT: Use This User's Guide!
This product is made up of several individual products. Use this User's guide for
this installation and discard the instructions that come in the individual boxes.
Customer supplied
wall fasteners
appropriate to
your wall
888-28-022-00 rev.A • 5/05
2 of 6
1 Determine Ergonomic Mounting Height
2 Attach to Wall
Use the appropriate Ergotron hardware kit (sold seperately) or your own hardware to mount the Track to the wall. You may
use all or some of the mounting holes depending on your application - see WARNING below.
WARNING:
Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to
wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury
and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to
your particular application.
a
Ø 1/2"
(13 mm)
b
Wall Anchor Hardware (sold separately)
If, after consulting with appropriate local engineering, architectural, or construction personnel it is determined that wall anchor
hardware should be used, refer to the following instructions.
1. Use a 1/2" (13mm) drill bit to drill holes.
2. Push anchor plate into hole.
3. Pull loop back so plate opens fl at against inside surface of wall.
4. Push collar into hole.
5. Snap off loop.
1 2 3 4 5
Ergotron hardware kit or customer supplied
wall fasteners appropriate to your wall
888-28-022-00 rev.A • 5/05
3 of 6
c
h
MM
h
MM
h
MM
h
MM
h
MM
h
MM
h
MM
h
MM
h
MM
3 Attach Pivots to Brackets
a b
c d e
3/32"
1/2"
1/2"
1/2"
1/2"
4x
set screw
8-32 x 5/16"
4x
Ergotron hardware kit or customer supplied
wall fasteners appropriate to your wall

Termékspecifikációk

Márka: Ergotron
Kategória: Lapos panel támogatás
Modell: Neo-Flex

Szüksége van segítségre?

Ha segítségre van szüksége Ergotron Neo-Flex, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Lapos panel támogatás Ergotron

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás

Konig

Konig KNM-MM20 Útmutató

8 Április 2025
Chief

Chief MWCU Útmutató

3 Április 2025
Chief

Chief KITXWXSM1U Útmutató

3 Április 2025
Chief

Chief RLXT3 Útmutató

3 Április 2025
Proaim

Proaim P-DMC Útmutató

2 Április 2025
Erard

Erard FLAK 800+ Útmutató

2 Április 2025
Metronic

Metronic 451060 Útmutató

28 Március 2025
ViewZ

ViewZ VZ-WM71 Útmutató

27 Március 2025