Használati útmutató Equip Cat.6a Keystone Jack shielded LSA+

Equip Kábelek PC-hez és perifériákhoz Cat.6a Keystone Jack shielded LSA+

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Equip Cat.6a Keystone Jack shielded LSA+ (1 oldal) a Kábelek PC-hez és perifériákhoz kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
2. Follow the color-coding to position T568A or T568B wiring.
T568A T568B
Pin 1 Pin 1White/Green White/Orange
Pin 2 Pin 2Green Orange
Pin 3 Pin 3White/Orange White/Green
Pin 4 Pin 4Blue Blue
Pin 5 Pin 5White/Blue White/Blue
Pin 6 Pin 6Orange Green
Pin 7 Pin 7White/Brown White/Brown
Pin 8 Pin 8Brown Brown
Cap
Cable tie
www.equip-info.net
1. Strip approximately 40mm of the cable jacket.
3. Follow the wiring sticker to place the wires into IDC slot.
Make sure to keep the pairs twisted as long as possible.
4. Punch the wires with a 110 or Krone impact tool and cut
off the surplus wires.
Unshielded Type:
5. Snap in the IDC cap to fix the wires, and finish the installation.
Shielded Type:
5. Tie up the cable by cable tie, and finish the installation.
40mm
Cat.6 Keystone Jack LSA+

Termékspecifikációk

Márka: Equip
Kategória: Kábelek PC-hez és perifériákhoz
Modell: Cat.6a Keystone Jack shielded LSA+

Szüksége van segítségre?

Ha segítségre van szüksége Equip Cat.6a Keystone Jack shielded LSA+, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Kábelek PC-hez és perifériákhoz Equip

Útmutatók Kábelek PC-hez és perifériákhoz

Legújabb útmutatók Kábelek PC-hez és perifériákhoz