Használati útmutató Epson EX5230

Epson Beamer EX5230

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Epson EX5230 (9 oldal) a Beamer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/9
Message Broadcasting 1
Message Broadcasting
Message Broadcasting is a plug-in for EasyMP Monitor.
Administrators can use the plug-in to send messages or
announcements to one or more projectors or all the projectors on the
network. You can send messages manually, or use the Timer function
in EasyMP Monitor to have messages sent automatically.
You can use Message Broadcasting to send images in JPEG format.
The maximum resolution for an image is 1920 × 1200 pixels.
Getting Started
Before you install the Message Broadcasting plug-in, make sure
EasyMP Monitor (version 4.40 or later) is installed, and your
projectors are registered in EasyMP Monitor. Make sure your
projectors support Message Broadcasting; check
www.epson.com/support if necessary.
Follow the instructions on the Epson website for downloading and
installing.
You need to use a networked Windows computer running
Windows®7, Windows Vista®, Windows XP, or Windows 2000
Professional to install the plug-in.
If any of the projectors you select are switched off, they will power on
automatically when you begin Message Broadcasting. For network
communication, make sure the Standby Mode setting in the
projectors’ Extended menu is set to Communication On.
2Message Broadcasting
Creating Messages
The easiest way to create messages in the JPEG format is to save slides
from Microsoft® PowerPoint® as .JPG files.
1. After you create a slide or series of slides in PowerPoint, open the
File menu and select Save As.
2. For the file type, select JPEG File Interchange Format (*.jpg),
then click Save.
If you are working with a series of slides, you can select whether
you want to save all slides or just the curent slide.
Broadcasting Manually
You can broadcast a single image or select a folder containing a series
of images to broadcast as a slideshow.
1. Start EasyMP Monitor. You may see a screen like the following,
showing your registered projectors and groups:
2. Open the Tool menu and select Plug-in > Message
Broadcasting.
note
This screen shows an
example of Group View.
Your screen will look
different in Detail View.
Message Broadcasting 3
You see the Message Broadcasting window:
3. Select the projector or group you want to send your message to.
4. Click the File or Folder button, depending on whether you want
to broadcast an individual message (File) or a series of slides
(Folder).
5. Click Select, then select the file or folder you want to broadcast.
You see the file or folder on the Message Broadcasting window:
6. If you have selected a folder, you can specify the timing between
slides. Select the number of minutes for the Update interval.
7. Click Start. Your message or slideshow is sent to the selected
projector or group. You will not see a confirmation message.

Termékspecifikációk

Márka: Epson
Kategória: Beamer
Modell: EX5230

Szüksége van segítségre?

Ha segítségre van szüksége Epson EX5230, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Beamer Epson

Útmutatók Beamer

Legújabb útmutatók Beamer

Acer

Acer P1165P Útmutató

16 Október 2024
InFocus

InFocus IN228 Útmutató

15 Október 2024
Acer

Acer X137WH Útmutató

14 Október 2024
Barco

Barco Thor Útmutató

14 Október 2024
NEC

NEC NP-M283X Útmutató

14 Október 2024
Acer

Acer X112 Útmutató

13 Október 2024
Sanyo

Sanyo PLC-8810N Útmutató

12 Október 2024
3M

3M X36i Útmutató

11 Október 2024
Optoma

Optoma EP774 Útmutató

11 Október 2024