Használati útmutató Energizer PowerKeep 12

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Energizer PowerKeep 12 (2 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Start Charged. Stay Charged.
12
Package Contents
1 PKcharge
2 Solar Panel
Charging Cable
3
USB OUTPUT
SOLAR PANEL
OUTPUT PORT
Product Includes: PKcharge battery holder, solar panel,
micro-USB cable, LED integrated light, four Energizer
® AA NiMH
rechargeable batteries and a AAA battery adapter
Product Information
You can charge and recharge AA and AAA* NiMH rechargeable
batteries with the PKcharge battery holder three ways: with the
PowerKeep portable solar panel, a USB charging port, or a wall outlet.
You can also use your PKcharge, with the batteries installed and
charged, to charge your USB device, such as a smartphone, when
you are on the go. Simply plug the smartphone into the output port
on the PKcharge and slide the switch on the back of the PKcharge
from ‘O’ to ‘Output’, and power will ow to your device.
3 modes
/OFF/OUTPUT
METAL
ATTACHMENT
RUBBER GRIP
INTEGRATED LIGHT
MICRO-USB
INPUT
USB OUTPUT
LED CHARGING
INDICATORS AA AND AAA
BATTERY HOLDERS
Start Charged
Connect the USB end to a wall
charger or laptop with input/output
USB port(s).
Connect the cable
to the solar panel
Connect the micro-USB end to the
input port to recharge
*Adapter NOT included
Stay Charged
Product Dimensions
PKcharge (LxWxH): 81 x 113 x 24 mm (3.1 x 4.4 x 0.9 in)
Solar panel open (LxWxH): 774 x 185 x 2 mm (30.5 x 7.3 x 0.08 in)
Solar panel folded (LxWxH): 225 x 186 x 18 mm (8.8 x 7.3 x 0.71 in)
Weight
PKcharge: 100 g (0.22 lb)
Solar panel: 293 g (0.65 lb)
Solar Panel
Solar power: 6W regulated
Output: 5V/1.2A
Color: Black
PKcharge
Battery capacity: Four AA NiMH 2300mAh/1.2V; 9200mAh combined (11.5 Whr)
Battery type: NiMH
Input/recharge port: 5V/1.0A, micro-USB
Output port: 5V/1.0A, USB-A
Regulatory certications: FCC, CE
USB charge: PKcharge is fully charged in 3-4 hours
Solar charge: PKcharge is fully charged in 3-6 hours**
Time to charge smartphone from PKcharge (avg): 3.5 hours***
Time to charge tablet from PKcharge (avg): 6 hours will charge a typical tablet to 50%***
Smartphone recharge(s) (avg): 1***
Tablet recharge(s) (avg): .5***
**AAA batteries not included.
**Solar charge time is dependent on angle and intensity of the sun.
***Results vary depending on model and device type.
© 2017 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related
subsidiaries and are used under license by PTGHS, LLC. All other brand names are trademarks of their respective
owners. Neither PTGHS, LLC nor Energizer Brands, LLC is aliated with the respective owners of their trademarks.
Support:
Telephone: 1-888-404-9010
Email: support@energizersolar.com
Website: energizersolar.com
Warranty: Read the complete Limited Warranty at
energizersolar.com/returns-warranty-information/
How to Charge AA/AAA NiMH
Rechargeable Batteries with the
PKcharge:
Charge AA NiMH rechargeable batteries:
I). Open your PKcharge’s battery holder with “PUSH” button.
II). Insert two or four AA batteries into battery holder and
close case.
IV).Use the micro-USB cable to connect the PKcharge input to:
A. The PowerKeep portable solar panel
B. A USB charging port
C. The wall using the same wall transformer that came with
your device (i.e. smartphone)
V). The four (4) charging LED lights will light up to let you know
when the batteries are charging. The LED lights will stop blinking
and stay on when fully charged.
VI). To determine if your PKcharge is fully charged, turn on the
PKcharge and the four (4) LED lights will light up.
VII). The PKcharge requires you to Charge/Discharge batteries by
pair or four. How to Use the Integrated Light
Important Notes
Slide the switch on the back of the PKcharge from ‘O’ to the
lightbulb icon to activate the light.
1. When the LED lights turn o, no charge remains. Recharge
the batteries before further use.
2. If the PKcharge detects that the output exceeds the limit
(1.0A), it will automatically power o. Unplug your device and
re-plug to resume output charge.
3. The PKcharge requires you to charge/discharge by pair
or four. To optimize eciency, keep like charge/discharge
batteries by pair or four when recharging or when using them
in external devices.
For the most up-to-date FAQs, please visit:
www.energizersolar.com/faqs
III). Slide the switch on the back of the PKcharge from ‘O’ to
‘Output’, and power will ow to your device.
IV). The four (4) charging LED lights will light up to let you know
when your device is charging. The LED lights will stop blinking and
stay on when fully charged.
Charge AAA* NiMH rechargeable batteries:
I). Gently lift the metal loops from location A to location B.
II). Insert the AAA batteries by pair or all four into the battery holder.
III). Lower the metal loops over the batteries, to location C.
B
A
C
How to charge your USB device, such as a smartphone,
with the PKcharge:
I). Insert charged batteries into the PKcharge battery holder.
II). Use the charging cable for your smartphone or USB device and
connect the device to the output port of the PKcharge.
POWERED BY

Termékspecifikációk

Márka: Energizer
Kategória: Akkumulátor töltő
Modell: PowerKeep 12

Szüksége van segítségre?

Ha segítségre van szüksége Energizer PowerKeep 12, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Akkumulátor töltő Energizer

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő