Használati útmutató Emos P57001

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emos P57001 (36 oldal) a Ajtócsengő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/36
3401000010_31-P57001_00_01_WEB 80 × 120 mm
P57001
GB Wired Doorbell
CZ Drátový zvonek
SK Drôtový zvoek
PL Dzwonek przewodowy
HU Vezetékes csen
SI Žični zvonec
RS|HR|BA|ME Ožičeno zvono na vratima
DE Draht-Türklingel
UA Дротовий дверний дзвоник
RO|MD Sonerie cur
LT Laidinis durų skambutis
LV Pie vadiem pievienojams durvju zvans
EE Juhtmega uksekell
BG Звънец с кабел
FR Carillon laire
IT Campanello a lo
ES Timbre con cable
NL Bedrade deurbel
www.emos.eu
2
3
3
1a
2
4
1b
1 2
1
2
4
3
3Button switch
N
N
L
L
3
GB | Wired Doorbell
The chime is designed for constant connection to a 230 V AC/50 Hz
power grid.
Read the instruction manual carefully to make sure you use the doorbell
correctly.
Technical Specications
Enclosure: IP20
Number of ringtones: 1
Chime power supply: 230 V AC/50 Hz
Chime Description (see g. 1)
1a – mounting hole/opening for
hanging
1b – mounting hole
2 – opening for wiring
3 – hole to open the cover
4 – front cover
Mounting the Doorbell (see g. 2)
Connection diagram (see g. 3)
Button switch
Installing the Doorbell
The chime is designed for indoor use only.
The installation may only be performed by an appropriately qualied
person.
During installation, follow applicable standards.
The electrical wiring should use a wire suitable for the specic installa-
tion conditions, with a cross-section of between 0.5 mm and 2.5 mm.
The phase conductor of the electrical wiring must be secured against
short circuits and overload by an appropriate circuit breaker or fuse.
1. Disconnect the source of 230 V AC power supply before installation.
Use a measuring instrument to make sure the wiring is not live.
2. Remove the front cover by inserting a screwdriver through the
openings on the sides.
3. Choose a spot for the doorbell, drill 2 holes matching the spacing of
the mounting holes on the doorbell and insert wall plugs into the wall.
4. Insert cables into the doorbell‘s opening for wiring and mount the
doorbell to the wall with screws.
5. Remove an approximately 1 cm long stretch of insulation from the
end of the cables.
6. Place the cables into the doorbell‘s supply terminals and fasten
them with screws.
7. Replace the front cover.

Termékspecifikációk

Márka: Emos
Kategória: Ajtócsengő
Modell: P57001

Szüksége van segítségre?

Ha segítségre van szüksége Emos P57001, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Ajtócsengő Emos

Emos

Emos P5712 Útmutató

31 December 2025
Emos

Emos P5733S Útmutató

14 December 2024
Emos

Emos P5729 Útmutató

14 December 2024
Emos

Emos P5728T Útmutató

14 December 2024
Emos

Emos P5729B Útmutató

14 December 2024
Emos

Emos P5705 Útmutató

14 December 2024
Emos

Emos P5750.2T Útmutató

14 December 2024
Emos

Emos P5760T Útmutató

14 December 2024
Emos

Emos P5733G Útmutató

14 December 2024
Emos

Emos P5760 Útmutató

14 December 2024

Útmutatók Ajtócsengő

Legújabb útmutatók Ajtócsengő