Használati útmutató Emos P5686

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emos P5686 (46 oldal) a Termosztát kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/46
P5686
GB Immersion Thermostat
CZ Jímkový termostat
SK Jímkový termostat
PL Termostat do zabudowy
HU Merülőhüvelyes csőtermosztát
SI Potopni termostat
RS|HR|BA|ME Potopni termostat
DE Thermostat mit Tauchhülse
UA Термостат з капілярною трубкою
RO|MD Termostat cu teacă
LT Panardinamasis termostatas
LV Iegremdējams termostats
EE Sukeltermostaat
BG Потопяем термостат
FR|BE Thermostat à plongeur
IT Termostato a pozzetto
NL Thermostaat met opvangbak
ES Termostato de inmersión
2101110000_31-P5686_00_01_WEB 105 × 148 mm
www.emos.eu
2
2
1
1
2
3
4
5
6
7
8
3
GB | Immersion Thermostat
Properties
Immersion thermostat with display
Temperature range 5 °C – 80 °C (0.1 °C resolution)
Simple electrical connection via screwless terminals
Specications
Switched load: max. 230 V AC; 5 A for resistive load; 1.5 A for inductive load
Power supply: 230 V AC
Temperature control range: 5 °C – 80 °C
Temperature measurement: 5 °C to 80 °C with 0.1 °C resolution accuracy ±1 °C
Temperature setting: 5 °C to 80 °C in 0.1 °C increments
Temperature dierential setting: 0.1 °C to 15 °C with 0.1 °C resolution
Thermowell dimensions: 58 mm, Ø 8 mm, ½ inch thread
Enclosure rating: IP40
Thermostat Description (See Fig. 1)
1 – activation indicator LED
2 – display
3 – up arrow (increase value)
4 – down arrow (decrease value)
5 – on/o/function setting button
6 – screws
7 – thermowell locking screw
8 – thermowell
Installation (See Fig. 2)
The thermowell is tted with a 1/2" external thread, which is to be screwed into the coupling collar
tted at the spot where you need to measure temperature (piping, tank). The thermostat’s sensor is
inserted into the thermowell so that the body of the thermostat is in contact with the thermowell. It
is then secured in this position using the screw on the plastic collar.
Electrical Connection
1. Remove the 2 screws on the front housing of the thermostat.
2. Carefully remove the front housing.
3. Connect in accordance with the following diagram (see Fig. 2):
Pump
Power – 230 V
Jump – jumper
PE – protective earth, prevents injury by electric current
4. The thermostat features a screwless conductor connection. Press downwards onto the top plastic
connector with e.g. a screwdriver. The terminal contact will release. Plug in the conductor. Repeat
the process for all conductors needed for connection. Replace the screws.
Installation should be carried out by a qualied person!
Installation must always be performed when power is turned o; follow safety specications. Main-
tain the maximum switched load listed in technical specications! The manufacturer is not liable
for inexpert installation.

Termékspecifikációk

Márka: Emos
Kategória: Termosztát
Modell: P5686

Szüksége van segítségre?

Ha segítségre van szüksége Emos P5686, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Termosztát Emos

Emos

Emos P5640S Útmutató

30 Augusztus 2024
Emos

Emos P5685 Útmutató

26 Augusztus 2024
Emos

Emos P5686 Útmutató

26 Augusztus 2024
Emos

Emos P5601N Útmutató

25 Augusztus 2024
Emos

Emos P5660SH Útmutató

24 Augusztus 2024
Emos

Emos P5611OT Útmutató

11 Augusztus 2024
Emos

Emos P5603R Útmutató

7 Augusztus 2024
Emos

Emos P5681 Útmutató

4 Augusztus 2024
Emos

Emos P5601UF Útmutató

3 Augusztus 2024
Emos

Emos P56211 Útmutató

2 Augusztus 2024

Útmutatók Termosztát

Legújabb útmutatók Termosztát