Használati útmutató Emos E6018

Emos Időjárás állomás E6018

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Emos E6018 (76 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/76

2606162000_31-E6018_00_01_WEB 105 × 148 mm

E6018

GB Wireless Weather Station

CZ Bezdrátová meteostanice

SK Bezdrôtová meteostanica

PL Bezprzewodowa stacja meteorologiczna

HU Vezeték nélküli meteorológiai állomás

SI Brezžična meteorološka postaja

RS|HR|BA|ME Bežična meteorološka stanica

DE Drahtlose Wetterstation

UA Бездротовий метеорологічний пристрій

RO|MD Staţie meteorologică fără r

LT Belaidė meteorologinė stotelė

LV Bezvadu meteoroloģiskā stacija

EE Juhtmevaba ilmajaam

BG Безжична метеорологична станция

FR Station météo sans l

IT Stazione Metereologica Wireless

ES Estación meteorológica inalámbrica

NL Draadloos weerstation

www.emos.eu

wireless sensor: transmission frequency 433 MHz, 10 mW e.r.p. max.

station power supply: 3× 1.5 V AAA batteries (not included)

adapter AC 230 V/DC 5 V, 300 mA (included)

sensor power supply: 2× 1.5 V AAA (not included)

station dimensions and weight: 17 × 192 × 127 mm, 364 g

sensor dimensions and weight: 15 × 62 × 100 mm, 54 g

Getting Started

1. Connect the adapter to the station, then insert batteries rst into the weather station (3× 1.5 V

AAA), then into the wireless sensor (2× 1.5 V AAA). The battery compartment of the sensor is

protected by screws; use a suitable screwdriver.

2. When inserting the batteries make sure the polarity is correct to avoid damaging the weather

station or sensor. Only use alkaline batteries of the same type; do not use rechargeable batteries.

3. Place the two units next to each other. The weather station will automatically detect the sensor

signal within 3 minutes. If signal from the sensor is not detected, long-press the button on

the weather station to repeat the search.

4. We recommend placing the sensor on the north side of the house. The range of the sensor may

decrease substantially in areas with large number of obstacles.

5. The sensor is resistant to dripping water; however, it should not be exposed to sustained rain.

6. Do not place the sensor onto metal objects as this will reduce its transmission range.

7. If the low battery icon is displayed, replace batteries in the sensor or weather station.

Switching Channel and Connecting Additional Sensors

1. Choose the desired channel 1, 2, or 3 for the sensor by repeatedly pressing the button. Then,

long-press the button; the icon will start ashing.

2. Unscrew the cover from the battery compartment on the rear of the sensor and set the sensor

switch to the desired sensor channel number (1, 2, 3), then insert batteries (2× 1.5 V AAA). Data

from the sensor will be loaded within 3 minutes.

3. If sensor signal is not found, remove the batteries and proceed again in accordance with steps

1 and 2 or press the TX button.

Displaying Data from Multiple Sensors, Automatic Cycling through Values from

Connected Sensors

Press the button repeatedly to display data from all connected sensors on the weather station,

one by one.

You can also activate cycling through data from all connected sensors:

1. turning on cycling

Repeatedly press the button until the display shows the icon.

Data from all 3 sensors will be shown automatically and repeatedly one after another.

2. turning o cycling

Repeatedly press the button until the icon disappears.

Radio Controlled Clock (DCF77)

The wireless sensor will automatically start searching for DCF77 (hereinafter referred to as DCF)

signal for 5 minutes after pairing with the weather station; the icon is ashing. (The DCF sensor

is located in the sensor).

Signal detected – the icon stops ashing and displays the current time with the DCF icon .

Signal not detected – DCF icon will not be displayed. DCF signal will be synchronised daily between

2:00 and 3:00 am.

Note: If the weather station detects DCF signal but the current time on the display is incorrect (e.g.

shifted ±1 hour), you must always set the correct time zone for the country where you are using the

station, see Manual Settings.

In standard conditions (at safe distance from sources of interference, such as TV sets or computer

monitors), the reception of time signal takes several minutes. If the weather station does not detect

the signal, follow these steps:

Temperature limit ranges

Outdoor Indoor

Minimum -50°C to +10°C 0°C–23°C

Maximum 28°C to +70°C 26°C–50°C

Resolution 0.5°C 0.5°C

While on the main screen, repeatedly press the button to switch to sensor 1, 2 or 3 and proceed for

each sensor as follows.

1. Short-press the button four times.

2. Press the button for 3 seconds and set the minimum outdoor temperature.

3. Short-press the button and activate (ON)/deactivate (OFF) the outdoor minimum temperature alert.

4. Short-press the button and set the minimum outdoor temperature.

5. Short-press the button and activate (ON)/deactivate (OFF) the outdoor maximum temperature alert.

6. Short-press the button and set the minimum indoor temperature.

7. Short-press the button and activate (ON)/deactivate (OFF) the indoor minimum temperature alert.

8. Short-press the button and set the minimum indoor temperature.

9. Short-press the button and activate (ON)/deactivate (OFF) the indoor maximum temperature alert.

When the set temperature limit is exceeded, an audio alarm will sound for 1 minute and the value

will begin ashing.

Pressing any button on the screen cancels the alert sound, but the symbol of an active alert will con-

tinue ashing. Once temperature drops below the set limit, the symbol on the screen will stop ashing.

Temperature, Humidity and Pressure Trends

falling constant rising

Moon phases

1 2 3 4 5 6 7 8

1 2 – New moon; – Waxing crescent; – First quarter; – Waxing gibbous; – Full moon; 3 4 5 6 – Waning

gibbous; – Last quarter; – Waning crescent7 8

Note: In the period between 18:00 and 06:00, the moon icon will be surrounded by stars.

Displaying Maximum and Minimum Readings of Temperature and Humidity

Press the button repeatedly to gradually display the maximum and minimum temperature and

humidity values measured.

The memory of measured values is automatically erased every day at 00:00.

Or long-press the button to erase the memory automatically.

Station Display Backlight

When powered via adapter:

Permanent backlighting is set automatically.

Repeatedly pressing the SNOOZE/LIGHT button will allow you to set 4 dierent levels of permanent

backlighting (o, maximum, medium, low).

When powered only by 3× 1.5 V AAA batteries:

Display backlighting is o. Pressing the SNOOZE/LIGHT button will turn the display backlight on for

5 seconds, then it turns o again. When the station is only powered by batteries, permanent back-

lighting of the display cannot be activated!

Termékspecifikációk

Márka:	Emos
Kategória:	Időjárás állomás
Modell:	E6018

Szüksége van segítségre?

Ha segítségre van szüksége Emos E6018, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Időjárás állomás Emos

14 December 2024

8 Augusztus 2024

31 Július 2024

30 Július 2024

30 Július 2024

29 Július 2024

27 Július 2024

Emos RST01278 Útmutató

26 Július 2024

Emos E0389 Útmutató

26 Július 2024

Emos E6016 Útmutató

25 Július 2024

Útmutatók Időjárás állomás

Legújabb útmutatók Időjárás állomás

TFA 35.1044.55.IT Útmutató

31 Március 2025

Bresser Translucidus NV Útmutató

27 Március 2025

Bresser ClimaTemp TB Útmutató

27 Március 2025

Ventus K0382 Útmutató

14 Január 2025

Alecto WS-1200 Útmutató

13 Január 2025

TFA 20.1082.17 Útmutató

13 Január 2025

Oregon Scientific BAR310HG Útmutató

12 Január 2025

Oregon Scientific BAR 898 Útmutató

12 Január 2025

Auriol AHFL 433 B2 Útmutató

12 Január 2025

Davis Weatherlink Touch Console Útmutató

11 Január 2025