Használati útmutató ELAC Alchemy DPA-2

ELAC Vevő Alchemy DPA-2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ELAC Alchemy DPA-2 (14 oldal) a Vevő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/14
DPA-2 STEREO/MONO AMPLIFIER OPERATING INSTRUCTIONS
Alchemy
ELAC Alchemy DPA-2 Amplifier | www.elac.com | Page 1
Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the amplifier and in the manual. Please check the amplifier for damage before
use. The amplifier must be in perfect working condition. Damaged parts may lead to personal injury.
2. Use only as directed
Connect the amplifier according to the instructions in the manual.
3. Location
Install the amplifier on a level surface only
When choosing the location of the amplifier do not place it in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Do not install the amplifier
near any heat sources such as radiators, heating valves, stoves, or other apparatus that produce heat, or in
areas where there is a risk of explosion.
Do not block any ventilation openings. Install in accordance with the instructions.
Do not install the amplifier in a closed rack or in a closed cupboard.
Do not put burning candles on or near the amplifier.
Do not install the amplifier near transformers because electromagnetic stray fields can cause hum.
In combination with certain materials / lacquers / material surfaces, anti-slip feet may cause colored
imprints on the surfaces.
4. Overload
Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave the amplifier under extreme overload conditions
unattended.
ELAC Alchemy DPA-2 Amplifier | www.elac.com | Page 2
5. Service
DANGER! Do not open the amplifier because there may be dangerous voltages inside. Servicing to be carried
out by qualified service personnel only.
Servicing is required when the amplifier has been damaged in any way, such as damage to the power supply
cord or the plug, or when liquid has been spilled or objects have fallen onto the amplifier, the amplifier has been
exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of electric
shock, do not open the amplifier. Servicing should be carried out by qualified service personnel only.
6. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol, benzene,
furniture polish or other agents for cleaning! Modern furniture is often coated with multiple varnishes and
plastics which can be treated with chemical agents. Some of these agents contain substances which degrade or
soften the rubber feet. Therefore we advise that you place an anti-slip mat underneath the amplifier.
7. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
8. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of life dispose of the amplifier as e-waste. The amplifier must be recycled in accordance with
local legislation. Ask your local government for further information on recycling as the device contains
valuable raw materials.

Termékspecifikációk

Márka: ELAC
Kategória: Vevő
Modell: Alchemy DPA-2

Szüksége van segítségre?

Ha segítségre van szüksége ELAC Alchemy DPA-2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő ELAC

Útmutatók Vevő

Legújabb útmutatók Vevő