Használati útmutató ELAC Alchemy DDP-2

ELAC hi-fi rendszer Alchemy DDP-2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ELAC Alchemy DDP-2 (15 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/15
DDP-2 PREAMP/DAC/STREAMER OPERATING INSTRUCTIONS
Alchemy
ELAC Alchemy DDP-2 Preamplifier | www.elac.com | Page 1
Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the preamplifier and in the manual. Please check the amplifier for damage
before use. The amplifier must be in perfect working condition. Damaged parts may lead to personal
injury.
2. Use only as directed
Connect the preamplifier according to the instructions in the manual.
3. Location
Install the preamplifier on a level surface only
When choosing the location of the preamplifier do not place them in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Do not install the
preamplifier near any heat sources such as radiators, heating valves, stoves, or other apparatus that produce
heat, or in areas where there is a risk of explosion.
Do not block any ventilation openings. Install in accordance with the instructions.
Do not install the preamplifier in a closed rack or in a closed cupboard.
Do not put burning candles on or near the preamplifier.
Do not install the preamplifier near transformers because electromagnetic stray fields can cause hum
noise.
In combination with certain materials / lacquers / material surfaces, anti-slip feet may cause colored
imprints on the surfaces.
4. Overload
Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave the amplifier under extreme overload conditions
unattended.
ELAC Alchemy DDP-2 Preamplifier | www.elac.com | Page 2
5. Service
DANGER! Do not open the amplifier because there may be dangerous voltages inside. Servicing to be
carried out by qualified service personnel only.
Servicing is required when the amplifier has been damaged in any way, such as damage to the power
supply cord or the plug, or when liquid has been spilled or objects have fallen onto the amplifier, the
amplifier has been exposed to rain or moisture, does not operate normally, or has been dropped. To
reduce the risk of electric shock, do not open the amplifier. Servicing should be carried out by qualified
service personnel only.
6. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol,
benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple
varnishes and plastics which can be treated with chemical agents. Some of these agents contain
substances which degrade or soften the rubber feet. Therefore we advise that you place an anti-slip mat
underneath the amplifier.
7. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
8. Disposal
The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of life dispose of the preamplifier as e-waste. The amplifier must be recycled in accordance with
local legislation. Ask your local government for further information on recycling as the device contains
valuable raw materials.

Termékspecifikációk

Márka: ELAC
Kategória: hi-fi rendszer
Modell: Alchemy DDP-2

Szüksége van segítségre?

Ha segítségre van szüksége ELAC Alchemy DDP-2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hi-fi rendszer ELAC

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer