Használati útmutató Dyson Purifier Humidify+Cool AutoReact

Dyson nincs kategorizálva Purifier Humidify+Cool AutoReact

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dyson Purifier Humidify+Cool AutoReact (13 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/13
User manual
SV12 JN.00000 PN.000000-00-00
00.00.00 VERSION NO.01
Getting started
Assembling your machine
Filling the water tank
Power and continuous monitoring
Information menu
Auto purify mode
Auto humidify mode
Oscillation
Airflow speed and direction
Sleep timer
Night mode
Deep cleaning your machine
Changing your HEPA+Carbon filter
Resetting your HEPA and
carbon filter life
Looking after your machine
Alerts
Dyson purifier humidify plus cool
auto react
Getting started
Amplifier loop
Deep clean cycle button
Stand-by button
Outer cover
release buttons
Outer cover
Water tank
release buttons
Stand-by
Auto purify mode
Airflow speed
Oscillation
Sleep timer
Information menu
Auto humidify mode
Humidity control
Airflow direction
Night mode
The layout of the remote control with the standby button on the top left, the Auto purify mode button below, then the
Airflow speed toggle up and down button. Below that is the Oscillation button and finally at the bottom is the Sleep timer
button. On the top right-hand side is the Information menu button, then going downwards, the Auto humidify mode
button, humidity control toggle button, Airflow direction and then Night mode button at the bottom.
Image of the machine with the location
of parts labelled.
The large oval loop making
up the top of the machine.
Two push down buttons
located either side of the main
body of the machine.
The mesh cover on the bot-
tom of the machine is in two
parts, front and back.
The buttons to remove the
water tank are located on
both sides, just above the
bottom of the machine.
The top, of the two buttons
located on the main body of
the machine just below the
loop amplifier, is the Deep
clean cycle button.
Below the Deep clean
cycle button is the
standby button.
Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Place the remote control on top of the machine with the buttons
facing down.
Plug in and switch on.
Your machine comes with a permanent catalytic filter and a
HEPA+Carbon filter.
Push the HEPA+Carbon filter into the outer cover and position
on the base. Push firmly until both outer covers click into place.
clik
clikclik
The purifying humidifying fan with the filter covers open showing a HEPA plus
carbon filter located in the filter covers and a catalytic filter. Arrows demonstrate
that the catalytic filter is fitted directly to the base of the machine and the filter
covers will need to be assembled onto the base of the machine.

Termékspecifikációk

Márka: Dyson
Kategória: nincs kategorizálva
Modell: Purifier Humidify+Cool AutoReact

Szüksége van segítségre?

Ha segítségre van szüksége Dyson Purifier Humidify+Cool AutoReact, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Dyson

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva