Használati útmutató Dynex DX-TVM113

Dynex Fali konzolok DX-TVM113

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dynex DX-TVM113 (13 oldal) a Fali konzolok kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/13
DX-TVM113
Slim-Profile TV Wall Mount
ASS EMBLY GUIDE
Safety information and specifications . . . . . . . . . 2
Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . 4
For wood-stud, solid concrete,
or concrete block installations
Before using your new product, please read these instructions to prevent any damage.
2Safety information and specificationsDX-TVM113
Safety information and specifications
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
CAUTION: Do not use this product for any
purpose not explicitly specified by Dynex.
Improper installation may cause property
damage or personal injury. If you do not
understand these directions, or have
doubts about the safety of the installation, contact
Customer Service or call a qualified contractor. Dynex is not
responsible for damage or injury caused by incorrect
installation or use.
The weight of your TV must not exceed 100 lbs. (45 kg). The
wall must be capable of supporting five times the weight of
your TV and wall mount combined.
This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young
children!
Tools needed
You will need the following tools to assemble your new TV wall mount:
ardware
Maximum TV weight: 100 lbs. (45 kg)
Screen size: 40 in. to 56 in. diagonal
Overall dimensions (H × W ):
16.7 × 27.3 in. (42.5 × 69.3 cm)
Wall-mount weight: 7 lb
Were here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
Edge-to-edge stud
finder Pencil
Level
Phillips screwdriver
Socket wrench with 1/2"
(13 mm) socket or
adjustable wrench
Measuring tape
Drill
7/32" (5.5 mm) wood drill bit
for wood stud wall
OR
1/2" (13 mm) masonry drill
bit (concrete only)
Hammer
Tape
Package contents 3
DX-TVM113
Package contents
Make sure that you have all the hardware necessary to assemble your new TV wall mount:
A Wall Plate (1)
B Left TV Bracket (1)
C Right TV Bracket (1)
R Wall Plate Template (1)
TV Hardware Bag
DX-TVM 113 Wa ll Pl at e Tem plat e • Ga ba rit • P lant illa
No te: F or wood fram e in stall ations, u se a stud n der to l ocate wood
studs rst.
Rem ar que : Pour u ne construction à ossatu re de bois, localiser
d'a bord les montan ts en bois, à l' aid e d'un détecteu r de m ontan ts.
No ta: pa ra la instal ación en con strucciones de arma zón d e madera,
prim ero debe l ocaliz ar la s vigas de ma dera con un locali zador de viga s.
http://s an.us /286
Need more information about your mount? Scan this QR code or vis it www.dynexproducts. com.
<FR> Need more information about your mount? Scan this QR code or vis it www.dynexproducts. com.
<SP> Need more information about your mount? Scan this QR code or vis it www.dynexproducts.com.
T o ol s Ne e de d
O uti ls n éc es s ai re s
He rra mi e nta s req ue ri da s
T op
Ha ut
Par t e s upe ri or
T op
Ha ut
Par t e s upe ri or
V1 13-0140
AB C R
Label Hardware Qty.
D 4
E 4
F 8
G 4
H 4
I 4
J 4
K 4
M4 × 12 mm
screw
M4 × 30 mm
screw
M4 washer
M6/M8 washer
M6 × 12 mm
screw
M6 × 20 mm
screw
M6 × 35 mm
screw
Label Hardware Qty.
L 4
M 4
N 4
O 4
P 4
Q 4
M8 × 16 mm
screw
M8 × 40 mm
screw
M6/M8 spacers
Lag bolt washer
5/16" × 2 1/2" lag bolt
Concrete anchor
1 0 20 30 40 50 60 70 80 90 100mm
1 2 3 4in

Termékspecifikációk

Márka: Dynex
Kategória: Fali konzolok
Modell: DX-TVM113

Szüksége van segítségre?

Ha segítségre van szüksége Dynex DX-TVM113, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek