Használati útmutató Dürkopp Adler 2180

Dürkopp Adler varrógép 2180

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dürkopp Adler 2180 (24 oldal) a varrógép kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/24

Instructions for service

2180 - 1

Minerva Boskovice, a.s., Sokolská 60, CZ - 680 17 Boskovice

Tel.: +420-516-453434, 453433, 494111 Fax: +420-516-452165 http://www.minerva-boskovice.com

Edition: 09/2006 Printed in Czech Republic S735 000746

CONTENTS:

1. General safety instructions ............................................................................................................................................... 1

2. Introduction .......................................................................................................................................................................... 1

3. Head of the sewing machine .............................................................................................................................................. 2

3. 1 Hook and hook post ................................................................................................................................................................ 2

.. 3.1.1 Description

3.1.2 Height setting of the hook

3.1.3 Setting the distance of the hook from the needle

3.1.4 Angular setting of the hook (timing)

3.1.5 Protection of the needle and of the hook point

3.1.6 Setting of the bobbin case opener

3.1.7 Setting the regulation of the hook lubrication

3.1.8 Replacement of the hook

3.1.9 Setting the gear

3.1.10 Dismantling of the hook post

3.2 Needle and thread mechanism ................................................................................................................................. 5

3.2.1 Description

3.2.2 To check the handwheel angular adjustment

3.2.3 Height setting of the needle bar

3.2.4 Side setting of the needle bar holder

3.2.5 Setting the needle (the needle bar holder) in the direction of sewing

3.3 Throat plate and its post ....................................................................................................................................................... 7

3.3.1 Description

3.3.2 Mounting and removing the throat plate

3.3.3 Side setting of the throat plate post

3.4 Thread tensioner ...................................................................................................................................................................... 8

3.4.1 Description

3.4.2 Setting the tension and switching off the main and the auxiliary tensionmer

3.4.3 Setting of the adjusting spring

3.5 Feeding mechanism of the needle feed and of the lower feed wheel ........................................................................ 9

3.5.1 Description

3.5.2 Stitch length mechanism

3.5.2.1 Setting of the stitch length eccentric

3.5.2.2 Setting of the stitch length button

3.5.3 Lower feed wheel

3.5.3.1 Feeding clutches

3.5.3.2 Wheel feeder and its post

3.5.3.2.1 Height setting of the feeder and tensioning of the chain

3.5.3.2.2 Replacement of the feeder

3.5.4 Setting the top roller (pressing force, height)

3.6 Feeding mechanism of the top roller ................................................................................................................................11

3.6.1 Description

3.6.2 Side setting of the indented lower pulley

3.6.3 Side setting of the indented upper pulley

3.6.4 Setting the tensioning roller

3.6.5 Replacement of the indented belt

3.6.6 Top roller

3.6.6.1 Selection of the top roller diameter

3.6.6.2 Forward, rearward and side setting

3.6.6.3 Setting the gear clearance and in the mounting of the top roller

3.6.6.4 Replacement of the top roller

3.7 Setting the presser foot lift ...................................................................................................................................................15

3.8 Bobbin winder ....................................................................................................................................................................... 16

3.8.1 Description

3.8.2 Setting the bobbin winder stop

3.8.3 Setting the friction gear

3.9 Safety clutch .......................................................................................................................................................................... 17

3.9.1 Description

3.9.2 Setting the disengaging moment

3.10 Indented belt transmission ................................................................................................................................................. 17

3.10.1 Setting the tensioning roller of the indented belt

3.10.2 Replacing the indented belt

3.11 V-belt, motor - head .............................................................................................................................................................. 18

3.11.1 Tensioning

3.11.2 Replacing the V-Belt

3.12 Lubrication .............................................................................................................................................................................. 19

3.12.1 Description

3.12.2 Refilling oil

3.12.3 Multiple oil use

4. Maintenance (table of operations) ............................................................................................................................................... 20

5. Setting the machine according to the sewing category ............................................................................................................ 20

5.1 Introduction