Használati útmutató Dolgin TC400

Dolgin Akkumulátor töltő TC400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dolgin TC400 (3 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
Battery Charger TC400
Owner’s Manual
Dolgin Engineering 1019 Massachusetts Ave. Lexington, MA 02420 • (781) 863-1813 • www.dolgin.net
1
Introduction
The TC400 Battery Charger is electrically compatible with all 7.2V Li-Ion camera batteries rated
2200mAh or higher. The modular design allows for different battery models to be charged and tested
when the appropriate adapter plate is fitted. Because the charger is software controlled, its
functionality allows for flexibility in charging and testing of batteries used. In addition to charging,
battery testing and camera power supply options are available. With the appropriate power cord, the
charger can be powered by a 12V automobile power source.
Standard Features
• Four simultaneous charge positions for fast charging of multiple batteries.
• Fast, safe, and reliable charging. The battery pack can be left on the charger after the charge
is complete.
• The charger’s design is based on modern “Gas Gauge” technology. This determines battery
capacity by monitoring the amount of charge input or removed from a rechargeable battery.
The multifunction LCD display with backlight shows charge in progress data: voltage,
estimated percent of readiness, and actual amount of charge in mAh input to the battery
after battery insertion.
• Wide range input power compatibility (100-240VAC 50-60Hz), 12V with the DC cigarette
lighter cord.
• Compact, lightweight design for easy portability.
Expansion Options
Thanks to modular design and software based functionality, the charger provides ultimate flexibility
for various video applications. Several expansion options are available.
• Test/discharge circuit for complete battery characterization.
• Camera power 7.2V (up to 1A)
• Automobile power source using the DC cigarette lighter cord.
Batteries
The charger is capable of charging 4 batteries at the same time. It accepts Sony L/M (VX2xx or
similar), Panasonic DVX100/HVX200/HMC150, Canon BPxx (XL/GL), and JVC BN-VF823 style
batteries. The charger must be configured with the appropriate plate to match the battery style.
The battery must to be rated at least 2200 mah capacity, as smaller size battery packs are not
designed to accept the charger fast charge.
Charging time
The time to full charge depends on the battery pack rated capacity, its state of charge prior to
insertion, and its age. A fully discharged new 2800 mAh battery pack will be fully charged (more than
90%) in about 2.5 hours. A 5600 mAh pack will take approximately 3.5 - 4 hours to charge. Since a
depleted battery pack absorbs charge current faster, than a partially charged one, most of the charge
energy is absorbed during the initial stage of charging and then the rate of charge levels off towards
the end.
Charge channels
All 4 charge channels are fully independent from each other; charge initiation and termination
depend on a battery’s state of charge. An LCD display indicates each battery’s state of charge, in
Dolgin Engineering 1019 Massachusetts Ave. Lexington, MA 02420 • (781) 863-1813 • www.dolgin.net
2
voltage, percent of readiness (estimated), and amount of charge in mAh input in it since the battery
insertion.
Test/Discharge circuit (optional)
With the Test/Discharge circuit installed, the charger becomes a complete battery management system
enabling battery characterization, as well as identifying anomalies resulting from aging and other deficiencies.
The test performed is a full charge-discharge-full charge routine. This test will identify the true capacity of the
battery displayed on the LCD panel. The discharge circuit closely approximates actual real life discharge, as
seen by the battery in normal camera use. The circuit is associated with channel 1.
Camera Power Output (optional)
The camera power supplied is 7.2V up to 1.5A. The charger is capable of providing camera power, while
charging batteries. When all 4 fully discharged batteries are inserted, the rate of charge will be automatically
reduced as needed in order to balance total power consumption. This results in a slight lengthening of the total
charge time.
Operation
Charging
Operation of the charger is fully automatic. Mount any battery to any open position on the charger
and the charger will initiate the charge routine. While charging is in progress, the LCD display will
indicate the battery voltage, estimated readiness in percent, and amount of charge accepted by the
battery. Upon charge completion, the display will report the position number (1-4), amount of charge
the battery has absorbed, and the completion message.
Upon the battery insertion, the charger will identify the battery’s state of charge, and initiates the
appropriate charge regimen. If the inserted battery is fully charged, it cannot safely absorb charge.
The charger will display the “ # 1(2,3,4) Ready” message.
Note:
• Estimated readiness is intended for the “charge in progress” status information. Accuracy may vary for an old
or new battery, and between different sizes and makes.
• Amount of charge absorbed by the battery is displayed from the moment of insertion. If a fully depleted
battery charged in full, the charge displayed is equal to the actual battery capacity in mAh.
• Upon the battery removal, please wait 2-3 seconds before inserting a new battery in the same position, as the
charger channel needs this time to initialize.
Status LEDs
LEDs help to quickly identify charging state.
1. Fast blink Battery is inserted; charge in progress
2. On Battery is ready (charged over 90%)
3. Slow blink Test in progress
Testing (optional feature)
• Insert the battery to be tested in position 1.
• Press “Test” button
A letter “t” will be displayed while channel 1 status information is shown
The charger will fully charge the battery, fully discharge using its internal load (LCD will display
“Discharging”), and then fully charge for complete readiness. The amount of charge delivered to the
load is displayed on the LCD panel. This is the true battery charge capacity in mAh.

Termékspecifikációk

Márka: Dolgin
Kategória: Akkumulátor töltő
Modell: TC400

Szüksége van segítségre?

Ha segítségre van szüksége Dolgin TC400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Akkumulátor töltő Dolgin

Dolgin

Dolgin TC200 Two Position Útmutató

14 Augusztus 2024
Dolgin

Dolgin TC40 Útmutató

9 Augusztus 2024
Dolgin

Dolgin TC200 Útmutató

9 Augusztus 2024
Dolgin

Dolgin TC400 Útmutató

9 Augusztus 2024

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő

Schwaiger

Schwaiger LAD230 531 Útmutató

9 Április 2025
Schwaiger

Schwaiger 658699 Útmutató

9 Április 2025
Schwaiger

Schwaiger LAD440 532 Útmutató

9 Április 2025
Ergotron

Ergotron 97-939 Útmutató

3 Április 2025
Ergotron

Ergotron YES35 Útmutató

3 Április 2025
Trust

Trust Maxo 25242 Útmutató

3 Április 2025
Ergotron

Ergotron LiFeKinnex Útmutató

3 Április 2025
Voltcraft

Voltcraft PB-19C Útmutató

31 Március 2025
Watson

Watson 9V-2BC Útmutató

30 Március 2025
ISDT

ISDT Q6 Lite Útmutató

26 Március 2025