Használati útmutató DJI GameSir T1d

DJI vezérlő GameSir T1d

Olvassa el alább 📖 a magyar nyelvű használati útmutatót DJI GameSir T1d (6 oldal) a vezérlő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
MENU
C2C1
II. Product Parameters
Name of the product
Model of product
Supporting platform
Bluetooth
Battery type
Input
Packaging size
Product size
Bluetooth controller T1d
T1d
Android, iOS
Bluetooth 4.0
600mAh, polymer lithium battery
5V-1A
185*180*80mm
162*101*67mm
Bluetooth controller T1d, support Bluetooth 4.0 wireless connection. It is
suitable for Android devices (version 4.3 or above) and Apple devices
(system version iOS8.0 or above). This product fully intelligent and
automatically identifies various models of equipment, no need to
manually set Android or iOS mode, connect and play.
Bluetooth controller
Operating Manual
I. Product Introduction
※Troubleshoot
※Product notes
Chicken Run, all rights reserved, version: 2018v1.0
III. Concept of Controller IV. Function Description
Pair
Power display
Charging port
Power button
Photo button Video button
Note: The factory default setting of the controller is the "America hand". The left
joystick control the height and the direction, the right joystick control the forward,
backward, and left direction of the flight.
1. Turn on and connect the controller
1) Short press the button to turn on, if it starts successfully, the ABXY
button of the controller will be always on.
2) Power display LED flickers slowly; Enter the Bluetooth mode directly
to wait for the APP connection;
3) Enter the flight control APP to connect the controller;
4) After connecting, the power display LED is always on and show the
quantity of electricity.
5) If the controller has been connected to other phones, press the "Pair"
button of the controller to force the controller to enter the state of waiting
match.
2. Turn-off
1) Long press the power button for 3-5 seconds, shut down the
controller, turn off all the LED lights;
3. Automatic turn-off
1) The controller is in connecting state, if it is idle for more than 5
minutes, the controller will turn off automatically.
2) The controller is in disconnecting state (waiting for connection), if no
connection for 2 minutes, the controller will turn off automatically.
4. Check the power
After the controller connected successfully, the LED lamp will show
current power information.
The LED lamp group shows the proportion: Fully bright is about 75% to
100%; 3 lights are about 50% to 75%; 2 lights are about 25% to 50%; 1
light is about 1% to 25%
5. Low battery alarm
1. When the available power is lower than the low power alarm voltage,
the LED light group lasts double flash;
2. When the available power is lower than the battery protection voltage,
the controller will turn off automatically.
6. Battery charging
1) LED lights 1-4 flicker slowly during charging;
2) When the charge is over (full), the LED light group is always on;
Disconnect the charging cable after charging.
7. Reset
Press the pinhole on the back of the controller quickly with the paperclip,
to force the entire controller to power off once, and reboot.
8. Firmware upgrading(OTA)
Connect the controller through the mobile phone APP Bluetooth, to
process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App
download address: www.gamesirhk/t1d
1) After entering the upgrade mode, the LED keeps on Lantern Dance,
and waits for the upgrade.
2) After the upgrade is completed, turn off the machine and restart it
automatically.
1. When you can't start the machine, Maybe the built-in battery is out of
power. Please recharge the controller with the USB line and start up
again.
2. If the controller crashed or dropped please don't keep it far away from
the device, or reconnect.
3. Factory setting (reset): There is a small hole on the back of the
controller, press it down with a toothpick or other hard bar object, press
RESET key to restore the factory setting.
1. Avoid strong vibration, don't disassemble, refit, repair by yourself.
2. Avoid storing in humid, high temperature, fumes and other places
3. Avoid the water or other liquids entering the inside of the controller, it
may affect the controller function.
4. There are batteries inside, do not drop the controller into the fire, there
is a danger of explosion.
5. The charging voltage of this product is USB 3.7-5.5V DC power
supply (ordinary Android mobile phone charging power can be used
directly), otherwise it may not be able to charge or cause damage.
6. Children need to use this product in the custody of an adult.
7. If there is a quality problem or suggestion, please contact the seller or
after sales personnel, and see the contact information on the outer
packing.
Lifting
Turn left Turn right
Back
Left Right
Falling
Custom key
Custom
key
Custom
key
Custom
key
Custom
key
Right joystick
Right joystick
Left joystick
Left joystick
Custom
key
Custom key
For all products:
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
※I MPORTANT SAFETY INSTRUCTIONS
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry doth.
7.Do not block any ventilation openings. Install this apparatus in
accordance with the manufacturer^ instructions.
8.Do not install this apparatus near any heat sources such as radiators,
heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9.Do not defeat the satiety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10.Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles and the point where they exit from the
apparatus.
11.Use only attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as when the
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, or the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.
15.Do not expose this apparatus to dripping or splashing, and ensure that
no objects filled with liquids, such as vases, are placed on the apparatus.
16.To disconnect this apparatus from the AC mains completely,
disconnect the power- supply cord plug from the AC receptacle.
IC INFORMATION FOR USERS
For Products That Transmit RF Energy:
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie
Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les
interférences qui peuvent causer un mauvais fonctionnement de
l'appareil.
There are no restrictions in use in EU
WARNING
DO NOT INGEST BAHERY, CHEMICAL BURN HAZARD [The remote
control supplied with] This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death. Keep new and used
batteries away from children. If the battery compartment does not dose
securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of
the body, seek Immediate medical attention.
CAUTION FCC AND IC STATEMENT FOR USERS
(USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
aaordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
WARNING: TO REDUCE THE RISK OF FIRE OR ELEQRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Federal Communication Commission Interference
Statement
THE LIGHTNING FLASH AN ARROWHEAD SYMBOL, WITHIN AN
EQUILATERALTRIANGLE, IS INTENDEDTO ALERT THE USER TO THE
PRESENCE OF UNINSULATEDTANGEROUS VOLTAGE"WITHIN THE
PRODUQ'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCKTO PERSONS.
smart
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDEDTO ALERT THE USERID THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUQIONS IN THE
LITERATURE ACCOMPANYING THE PRODUQ.
17.The mains plug of the power-supply cord shall remain readily operable.
18.Do not expose batteries to excessive heat such as sunshine, fire or the
like.
not occur in a particular installation. If this equipment does ause harmliil
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION

Termékspecifikációk

Márka: DJI
Kategória: vezérlő
Modell: GameSir T1d

Szüksége van segítségre?

Ha segítségre van szüksége DJI GameSir T1d, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő DJI

DJI

DJI Motion Controller Útmutató

14 Január 2025
DJI

DJI GameSir T1d Útmutató

5 Augusztus 2024
DJI

DJI FPV Remote Controller 2 Útmutató

7 Július 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

8BitDo

8BitDo Ultimate C Wired Controller Xbox Útmutató

11 Január 2025
Balam Rush

Balam Rush Kontrol React G575 Útmutató

11 Január 2025
Sonance

Sonance VC30R Útmutató

9 Január 2025
BeamZ

BeamZ WTR10-5 Útmutató

6 Január 2025
Audibax

Audibax MC1000 Útmutató

6 Január 2025
Somfy

Somfy Keypad 2 RTS Útmutató

2 Január 2025
Somfy

Somfy Keypop RTS Útmutató

2 Január 2025
Somfy

Somfy Wall Switch 3 RTS Útmutató

2 Január 2025
Logitech

Logitech Driving Force Shifter Útmutató

1 Január 2025
MOZA

MOZA Hand Brake Útmutató

1 Január 2025