Használati útmutató Digitus DN-95210

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Digitus DN-95210 (2 oldal) a Kábelek PC-hez és perifériákhoz kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
PoE Tester
Manual
DN-95210
Use this PoE tester to determine if a network cable or port is providing
Power-Over-Ethernet. When you plug a network cable into the tester (or
connect the tester to a network jack), an LED will light up if active 24-48V
PoE is detected. The tester will also indicate if the PoE is active on the
Endspan (1-2/3-6) or Midspan (4-5/7-8) pairs.
Features
Detectable IEEE802.3 af/at PoE standard
Identification of Mid-Span (4/5 7/8) and End-Span (1/2 3/6)
Testing cable is included for PoE port testing.
No additional power supply or battery
Package Content
PoE Tester p2-x1
Test Cable p2-x1
Manual x1
Operating Instruction
1. Connect PoE cable to RJ45 socket. (or You can also test the PoE switch with the
Test Cable” in accessory.)
2. PoE LED indicator will light up if 24-48V PoE is detected.
3. It also tells the PoE mode Mid-Span (4/5 7/8) or End-Span (1/2 3/6)
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post
under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

Termékspecifikációk

Márka: Digitus
Kategória: Kábelek PC-hez és perifériákhoz
Modell: DN-95210

Szüksége van segítségre?

Ha segítségre van szüksége Digitus DN-95210, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Kábelek PC-hez és perifériákhoz Digitus

Útmutatók Kábelek PC-hez és perifériákhoz

Legújabb útmutatók Kábelek PC-hez és perifériákhoz