Használati útmutató Digitus DA-81608

Digitus Papír aprító DA-81608

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Digitus DA-81608 (5 oldal) a Papír aprító kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
Paper Shredder X10
Manual
DA-81608
2
This device is solely intended to shred/destroy a maximum of 10 (unstapled) sheets of paper
per operation. Any other use is deemed incorrect use and thus will invalidate the extended
warranty and endanger your safety. The device cannot shred laminated paper or plastic
sleeves and will be irreparably damaged if used in this way.
Safety precautions:
Warning:
• Read through these operating instructions before starting to use the device and keep them
safe for later consultation.
• To avoid injury, keep long and/or lightweight objects, such as clothing (scarves, ties, etc.),
jewellery (necklaces, bracelets, etc.) as well as long hair away from the opening where
paper is inserted.
• If the device is not going to be used for an extended period, switch it off entirely and
unplug the power socket.
• Do not insert hands or fingers into the input slot since this may cause serious injuries.
• Avoid all contact with liquids and do not spray any flammable liquids, compressed air or
gases into or onto the device as these could easily ignite.
• Unplug or switch off the device before moving, cleaning or emptying it.
• Immediately switch off the device in the event of damage or improper functioning and
unplug the power socket. Get the device checked by a specialist dealer or customer service.
• The device must not be operated using a damaged power cable.
• Empty the collecting container regularly.
• Do not leave the shredder unattended, especially if there are children or animals nearby.
The device is not a toy - ensure it is out of the reach of children and animals.
• The device is only suitable for use indoors.
• Keep the device as close as possible to the source of power in case of emergencies . If
possible, do not use an extension cable.
• This device was designed to shred paper up to DIN A4 size (80g/m²). Larger sheets of paper
must be folded or cut until they are A4-sized or smaller.
• To avoid overloading, ensure that you do not exceed the maximum number of sheets per
operation.
• Do not insert any plastic covers or metal strips into the cutting unit since such materials
may damage the blades.
• Remove all paper clips and staples before inserting the paper.
3
Placing the shredder:
1. Place the device on a smooth and flat surface.
2. Ensure the device is positioned in a distance from heaters or other sources of heat.
3. Where possible, avoid using extension cables or multi-way sockets. It is advisable to
connect the device directly to the wall socket using the power cable (in accordance with
the technical specifications).
4. Safely position the shredder above the paper basket while ensuring your fingers do not get
caught between the top of the paper basket and the shredder attachment.
5. Connect the mains plug to a conventional 220- 240 volt AC power socket.
Important notice: The device is fitted with a release mechanism which stops the device from
functioning if it is not being operated correctly with the paper basket provided. The unit must
be flush with the edge of the paper basket with the extensions locking into the device to
enable it to function. If this does not occur, re-position the device on the paper basket or place
it the other way around until you hear a faint click.
Operating the shredder:
A switch is located on the top of the device and can be set in three (3) positions.
1. AUTO position: the cutting process is automatically initiated as soon as paper, a CD/DVD or
credit card is inserted into the corresponding input slot. Please do not insert any CDs/DVDs
or credit cards into the input slot while shredding paper since the device is incapable of
shredding of paper at the same time as CDs/DVDs or credit cards. Once the chosen
material has fully passed through the cutting unit, the cutting process will stop
automatically.
2. REV is used to fix paper blockages. This changes the cutting direction before an operating
cycle has ended enabling the blades to be released. If you realise that you have
unintentionally inserted too much paper, and the shredding process becomes noticeably
slower, set the switch to this position.
3. The switch should be set to if you wish to empty the paper basket, or do not intend “ ” OFF
to use the device for an extended period. After doing so, unplug the device from the power
supply.
The device is only intended for personal use indoors and for a short operation period of a
maximum of 2 minutes. Do not use the shredder for commercial purposes or outdoors.

Termékspecifikációk

Márka: Digitus
Kategória: Papír aprító
Modell: DA-81608

Szüksége van segítségre?

Ha segítségre van szüksége Digitus DA-81608, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Papír aprító Digitus

Digitus

Digitus DA-81606 Útmutató

15 December 2024
Digitus

Digitus DA-81608 Útmutató

11 Szeptember 2024
Digitus

Digitus DA-81605 Útmutató

18 Augusztus 2024
Digitus

Digitus DA-81607 Útmutató

23 Július 2024

Útmutatók Papír aprító

Legújabb útmutatók Papír aprító

Anova

Anova BIO150D Útmutató

3 Április 2025
Fellowes

Fellowes Powershred 325Ci Útmutató

12 Január 2025
Fellowes

Fellowes Powershred LX25M Útmutató

12 Január 2025
Olympia

Olympia PS 58 CC Útmutató

12 Január 2025
Olympia

Olympia PS 53 CC Útmutató

12 Január 2025
Bonsaii

Bonsaii S123-B Útmutató

11 Január 2025
Bonsaii

Bonsaii C206-G Útmutató

11 Január 2025
GBC

GBC AutoFeed+ 100M Útmutató

5 Január 2025
GBC

GBC ShredMaster SM15-08 Útmutató

5 Január 2025
GBC

GBC ShredMaster PX10-06 Útmutató

5 Január 2025