Használati útmutató Digital Watchdog DWC-P336CNMW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Digital Watchdog DWC-P336CNMW (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
DWC-P336CNMW
Corner and pole mount bracket for white IP PTZ cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the search bar. Results ‘Search by Product’
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
6x plastic anchors (6pi) 4x nut (M8)
6x tapping screws (6x50) 2x hose band (275mm)
4x machine screws, PH (M6x25) 1x quick setup guide
4x machine screws, PH (M8x35)
Feed the hose bands through the vertical stills located on the four corners
of the mounting flaps as shown to the right. Wrap the hose bands around
the pole like structure then use the driver to rotate the screw attached
at the end of the hose bands clockwise. Rotating the screw shortens the
bands, thereby fastening around the structure.
Using the appropriate screws and nuts supplied, ax the power
box base to the pole and corner mount at the four corners of the
mounting surface.
Using the appropriate screws and nuts supplied, ax the wall mount to the pole and corner mount at the four corners of the
mounting surface as shown below.
A - Installation using DWC-P336WM
B - Installation using DWC-P220WM
Using the pole and mounting bracket as a template, mark the
locations of the six screw holes where the mounting adaptor will
go. Install the plastic anchors (D6) at the six pre-marked locations.
Use the screws with washers to ax the mount adaptor to the
corner of a building structure.
COMPOSITION
Quick Start Guide
Tapping screw
BH 6x50L stainless
steel
Plastic anchor (D6)
Mounting the accessory to a structure’s pole
Mounting the accessory to a structure’s corner
Mounting a power box to the pole and corner mount bracket
Stainless hose band
D= 10.24” (260mm)
Screw Machine (SEMS)
PH M8x35L
Screw Machine (SEMS)
PH M6x25L
B
A
Nut M8
Machine screw (SEMS)
PH M8x35L
A
Machine screw (SEMS)
PH M6x25L
B
Rev Date: 01/20
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.

Termékspecifikációk

Márka: Digital Watchdog
Kategória: nincs kategorizálva
Modell: DWC-P336CNMW

Szüksége van segítségre?

Ha segítségre van szüksége Digital Watchdog DWC-P336CNMW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Digital Watchdog

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025