Használati útmutató Deutz 912

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Deutz 912 (82 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/82
1 Gerade
Operation Manual
912
913
26 472
Please read and observe the information
given in this Operation Manual. This will
enable you to avoid accidents, preserve the
manufacturer’s warranty and maintain the
engine in peak operating condition.
This engine has been built exclusively for
the application specified in the scope of
supply, as described by the equipment manu-
facturer and is to be used only for the
intended purpose. Any use exceeding that
scope is considered to be contrary to the
intended purpose. The manufacturer will
not assume responsibility for any damage
resulting therefrom. The risks involved are
to be borne solely by the user.
Use in accordance with the intended pur-
pose also implies compliance with the con-
ditions laid down by the manufacturer for
operation, maintenance and servicing. The
engine should only be operated by person-
nel trained in its use and the hazards in-
volved.
The relevant accident prevention guidelines
and other generally accepted safety and
industrial hygiene regulations must be ob-
served.
When the engine is running, there is a risk of
injury through:
- turning/hot components
- engines with positive ignition
- ignition systems (high electrical voltage)
You must avoid contact at all times!
Unauthorized engine modifications will in-
validate any liability claims against the manu-
facturer for resultant damage.
Manipulations of the injection and regulating
system may also influence the performance
of the engine, and its emissions. Adherence
to legislation on pollution cannot be guaran-
teed under such conditions.
Do not change, convert or adjust the cooling
air intake area to the blower.
The manufacturer shall not be held respon-
sible for any damage which results from
such work.
When carrying out maintenance/repair op-
erations on the engine, the use of DEUTZ
original parts is prescribed. These are spe-
cially designed for your engine and guaran-
tee perfect operation.
Non-compliance results in the expiry of the
warranty!
Maintenance and cleaning of the engine
should only be carried out when the engine
is switched off and has cooled down.
You must ensure that the electrical systems
have been switched off and the ignition key
has been removed.
Accident prevention guidelines concerning
electrical systems (e.g. VDE-0100/-0101/-
0104/-0105 Electrical protective measures
against dangerous touch voltage) are to be
observed.
When cleaning with fluids, all electrical com-
ponents are to be covered impermeably.
Safety guidelines / Accident prevention
00_GB.p65 04.02.2002, 14:232
3 Gerade
Please enter the engine serial number here. This
number should be quoted when inquiring about
Customer Service, Repairs or Spare Parts (see Section
2.1).
All rights reserved. Technical modifications required
to improve our engines are reserved with regard to
specification data and other technical information
contained in this Operation Manual. No parts of this
Manual may be reproduced in any form or by any
means without our written approval.
0297 9690 en
Engine
Serial Number
Operation Manual
912
913

Termékspecifikációk

Márka: Deutz
Kategória: nincs kategorizálva
Modell: 912

Szüksége van segítségre?

Ha segítségre van szüksége Deutz 912, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Deutz

Deutz

Deutz 2011 Útmutató

19 Augusztus 2024
Deutz

Deutz 914 Útmutató

18 Augusztus 2024
Deutz

Deutz 912 Útmutató

18 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva