Használati útmutató Delta 14-651
Delta
Boormachine
14-651
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Delta 14-651 (43 oldal) a Boormachine kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/43
Instruction manual
Manuel d’utilisation
Manual de instrucciones
14-651
Type III
www.DeltaMachinery.com
Français (16)
Español (29)
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO
Y PÓLIZA DE GARANTÍA. LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
1/2 HP BENCH MORTISER
Mortaiseuse à bédane creux de 1/2 HP
Mortajadora de cincel hueco de 1/2 HP
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool
or equipment. When using tools or equipment, basic safety precautions should always be followed
to reduce the risk of personal injury. Improper operation, maintenance or modication of tools or
equipment could result in serious injury and property damage. There are certain applications for
which tools and equipment are designed. DELTA® Power Equipment Corporation strongly recommends that
this product NOT be modied and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA®
Power Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by
mail at Technical Service Manager, DELTA® Power Equipment Corporation , 4825 Highway 45 North, Jackson,
TN 38305.
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.
com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4 oor, New York, NY 10036 www.ansi.org - ANSI
01.1 Safety Requirements for Woodworking Machines
• U.S. Department of Labor www.osha.gov
SAVE THESE INSTRUCTIONS!
SAFETY GUIDELINES - DEFINITIONS
will death or serious injury
could death or serious
injury.
may minor or moderate
injury.
may property damage
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways
wear NIOSH/OSHA approved, properly tting face mask or respirator when using such tools.
IMPORTANT SAFETY INSTRUCTIONS .......................2
SAFETY GUIDELINES - DEFINITIONS ........................2
GENERAL SAFETY RULES 3 ..........................................
ADDITIONAL SPECIFIC SAFETY RULES 4 ...................
FUNCTIONAL DESCRIPTION .......................................6
CARTON CONTENTS ...................................................6
ASSEMBLY ....................................................................7
OPERATION ................................................................11
TROUBLESHOOTING .................................................13
MAINTENANCE ...........................................................13
SERVICE ......................................................................14
ACCESSORIES ...........................................................14
WARRANTY .................................................................15
FRANÇAIS ...................................................................16
ESPAÑOL ....................................................................29
GENERAL SAFETY RULES
.
Failure to follow these rules may result in serious personal injury.
FOR YOUR OWN SAFETY, READ THE INSTRUCTION
MANUAL BEFORE OPERATING THE MACHINE.
WEAR EYE AND HEARING PROTECTION. ALWAYS
USE SAFETY GLASSES.
WEAR PROPER APPAREL.
DO NOT USE THE MACHINE IN A DANGEROUS
ENVIRONMENT.
MAINTAIN ALL TOOLS AND MACHINES IN PEAK
CONDITION.
CHECK FOR DAMAGED PARTS.
should be properly repaired or
replaced with DELTA® or factory authorized replacement
parts.
KEEP THE WORK AREA CLEAN.
KEEP CHILDREN AND VISITORS AWAY.
REDUCE THE RISK OF UNINTENTIONAL STARTING.
USE THE GUARDS.
REMOVE ADJUSTING KEYS AND WRENCHES BEFORE
STARTING THE MACHINE.
USE THE RIGHT MACHINE.
USE RECOMMENDED ACCESSORIES.
USE THE PROPER EXTENSION CORD.
SECURE THE WORK PIECE.
FEED THE WORK PIECE AGAINST THE DIRECTION OF
THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE
SURFACE.
DON’T FORCE THE WORK PIECE ON THE MACHINE.
DON’T OVERREACH.
NEVER STAND ON THE MACHINE.
NEVER LEAVE THE MACHINE RUNNING UNATTENDED.
TURN THE POWER OFF.
TURN THE MACHINE “OFF”, AND DISCONNECT THE
MACHINE FROM THE POWER SOURCE
MAKE YOUR WORKSHOP CHILDPROOF WITH
PADLOCKS, MASTER SWITCHES, OR BY REMOVING
STARTER KEYS.
. STAY ALERT, WATCH WHAT YOU ARE DOING, AND
USE COMMON SENSE. DO NOT USE THE MACHINE
WHEN YOU ARE TIRED OR UNDER THE INFLUENCE
OF DRUGS, ALCOHOL, OR MEDICATION.
USE OF THIS TOOL CAN GENERATE
AND DISBURSE DUST OR OTHER AIRBORNE
PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE
SILICA DUST AND ASBESTOS DUST.
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
Termékspecifikációk
| Márka: | Delta |
| Kategória: | Boormachine |
| Modell: | 14-651 |
Szüksége van segítségre?
Ha segítségre van szüksége Delta 14-651, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Boormachine Delta
9 Augusztus 2024
6 Augusztus 2024
Útmutatók Boormachine
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Worx
- Boormachine Bosch
- Boormachine AEG
- Boormachine Einhell
- Boormachine Ozito
- Boormachine Makita
- Boormachine Hyundai
- Boormachine Flex
- Boormachine Scheppach
- Boormachine Ergotools Pattfield
- Boormachine Ribimex
- Boormachine Mafell
- Boormachine Genesis
- Boormachine Güde
- Boormachine Hitachi
- Boormachine Hilti
- Boormachine Black & Decker
- Boormachine Workzone
- Boormachine Global
- Boormachine Kawasaki
- Boormachine PowerPlus
- Boormachine DEDRA
- Boormachine Metabo
- Boormachine RYOBI
- Boormachine Proxxon
- Boormachine HiKOKI
- Boormachine Festool
- Boormachine Yato
- Boormachine Baumr-AG
- Boormachine Trotec
- Boormachine Zipper
- Boormachine Bavaria By Einhell
- Boormachine Porter-Cable
- Boormachine DeWalt
- Boormachine Stanley
- Boormachine Silverline
- Boormachine Vonroc
- Boormachine Cotech
- Boormachine Alpha Tools
- Boormachine Luxor
- Boormachine Holzmann
- Boormachine Fein
- Boormachine Craftsman
- Boormachine Graphite
- Boormachine Ferm
- Boormachine Tryton
- Boormachine Skil
- Boormachine Meec Tools
- Boormachine Sun Joe
- Boormachine Tacklife
- Boormachine Maktec
- Boormachine Steren
- Boormachine Bort
- Boormachine Power Craft
- Boormachine Eibenstock
- Boormachine Topcraft
- Boormachine Gamma
- Boormachine Clas Ohlson
- Boormachine Carat
- Boormachine Kress
- Boormachine Varo
- Boormachine Truper
- Boormachine Kinzo
- Boormachine Bruder Mannesmann
- Boormachine Meister Craft
- Boormachine RIDGID
- Boormachine Rupes
- Boormachine Batavia
- Boormachine Protool
- Boormachine Westfalia
- Boormachine Huvema
- Boormachine Stomer
- Boormachine Elu
- Boormachine Blucave
- Boormachine Kreg
- Boormachine Sthor
- Boormachine Verto
- Boormachine Rok
- Boormachine Profitech
- Boormachine Narex
- Boormachine Rikon
- Boormachine Duro Pro
- Boormachine Baier
- Boormachine RUKO
- Boormachine Felisatti
- Boormachine MSW
- Boormachine Robust
- Boormachine Einhell Bavaria
- Boormachine MyTool
- Boormachine G-Technology
- Boormachine Rodcraft
- Boormachine Stalco
Legújabb útmutatók Boormachine
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
15 Október 2024
14 Október 2024