Használati útmutató Cotech JFB10

Cotech Fűrészgép JFB10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech JFB10 (64 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/64
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Art.no Model
18-3205 JFB10-UK
40-7894 JFB10
Band Saw
Bandsåg
Båndsag
Vannesaha
Bandsäge
Ver. 20150717
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
2
ENGLISH
10″ Band Saw
Art.no 18-3205 Model JFB10-UK
40-7894 JFB10
Please read theentire instruction manual before use and save it for future reference. We reserve theright for any
errors in text or images and for making any necessary technical changes to this document. If you should have
any questions concerning technical problems please contact our Customer Services.
1. Safety
Warning!
In order to minimise therisk of fire, electric shock or personal injury, certain basic safety precautions must always
be observed when using this machine. Read this instruction manual carefully before using theproduct and save
this manual for future reference.
• Keep theworking area tidy. Cluttered surfaces and benches invite accidents.
• Take stock of your working environment. Do not expose thetool to rain. Do not use thetool in moist or wet
areas. Keep theworking area well lit. Never operate thetool near flammable liquid or gas.
• Avoid electric shocks. Avoid body contact with earthed objects such as pipes, radiators, ovens or refrigerators.
• Keep other people at asafe distance. Do not allow anyone, especially children, not involved in thework process
to touch thetool or its electric cable. Keep all bystanders at adistance.
• Store thetool in asafe place. When your tools are not in use, keep them in alocked, dry area, away from children.
• Do not force thetool. The tool will work better and safer at thefeed rate for which it was intended.
• Use thecorrect machine. Do not try to use small tools to perform jobs requiring more powerful tools. Do not
use atool for apurpose for which it was not designed, e.g. using acircular saw for lopping branches off trees.
• Wear suitable attire. Do not wear loose-fitting clothing or jewellery; they could be caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wear ahairnet or similar if you have long hair.
• Always use safetywear. Wear safety glasses. Use adust mask or dust filter when working in dusty environments.
• Use dust extractors. If thetool is equipped with or connected to adust extractor/collector, make sure that
itis turned on and used correctly.
• Do not abuse thelead. Do not jerk thelead, grip theplug itself when disconnecting thepower. Make sure
that themains lead does not come into contact with heat, oil, or sharp edges.
• Firmly secure theworkpiece. If possible use vices or clamps to hold theworkpiece in place. This is much
safer than holding theworkpiece in one hand.
• Do not overreach. Make sure that you stand steady and balanced all times.
• Look after you tools. Make sure that they are clean and that theedges are sharp for maximum effect and
best results. Follow themanual’s recommendations regarding lubrication and replacement of accessories.
Inspect themains lead regularly. If it is damaged it should be replaced by aqualified service technician.
Inspect all leads and cables regularly to check for any damage. Make sure that themachine’s handles and
controls are clean, dry and free from oil and grease.
• Have any defective power switches replaced at aqualified service centre.
• Do not use theproduct if theON/OFF switch does not function properly.
• Turn thepower off. Pull out theplug and push in theemergency stop button before servicing or changing
any blades, drill bits, cutters or sanding discs.
• Remove all spanners and repair tools. Make ahabit of checking to make sure that themachine is free of all
spanners and tools before turning thepower on.
• Avoid accidental starts. Do not walk around with your finger on thetrigger of apower tool if it is plugged in.
Make sure that theON/OFF switch is set to OFF before plugging in any power tool.
3
ENGLISH
• Use thecorrect extension leads. If you use extension leads outdoors, only use those designed for outdoor
use. Only use extension leads with thick enough diameter core wires and roll out thewhole lead.
• Use common sense and be careful. Think before carrying out any task, so that it is carried out safely.
Never operate machines/power tools when you are tired or under theinfluence of medicine.
• Check thefollowing before turning thetool on:
- That all guards and other parts are whole and in working order.
- That moving parts are free and correctly aligned.
- That no moving parts can get caught.
- That there are no visible defects.
- Other factors that can influence work execution.
• Use only recommended accessories. The use of accessories which are not recommended by
themanufacturer may present arisk of personal injury.
• Check that thetool conforms to current safety regulations. Repairs to thetool should only be carried out by
atradesman using original spares; otherwise thetool could cause accidents and personal injury.
Additional safety instructions
• If using afloor stand, make sure that theband saw is securely fastened to thestand and that thestand is
properly assembled and securely fastened to thefloor.
• Make sure that theband saw is positioned in such away that theworkpiece can be worked on in asafe manner.
• This saw must not be used for wet cutting. Doing so can lead to deadly electric shocks. This band saw is
only intended for dry cutting.
• The drive belt must not be put under too much tension; it will last longer if thetension is released when
thesaw is not in use.
• Do not allow thebuild-up of sawdust around themotor or inside themachine. Piles of sawdust are afire hazard.
• The sawblade must not be stopped through theexertion of pressure on theworkpiece or by apply force to
thesides of theblade.
• The machine’s safety guards must be in place and functioning properly. Always check that theblade guides
are correctly aligned.
• Never turn themachine on if thesaw blade is in contact with theworkpiece.
• Make sure that there are no nails or screws in theworkpiece which could damage thesaw blade.
• Do not attempt to modify themachine or its accessories in any way.
• Do not apply too much pressure to theworkpiece when feeding it into thesaw blade. A steady feed
rate reduces wear on thesaw and saw blade and consequently increases theefficiency and useful life of
theband saw. Replace any worn table inserts.
• Connect theband saw to adust extractor before starting to saw. The saw must not be used if any of its
panels is open or if theblade guard is not in place.
• Select an appropriate saw blade and sawing speed for thetype of workpiece.
• When sawing with atilted table, position theguide on thelower side of thetable.
• Position theblade guard as close to theworkpiece as possible.
Saw blade safety
• Use only blades recommended by themanufacturer/supplier.
• Do not use adamaged or deformed saw blade. Doing so could result in considerable danger to theuser
ordamage to themachine.
• The direction marked on thesaw blade should correspond to thedirection of thepulley’s rotation.
• The teeth of theblade should be pointing downwards when theblade is viewed from theside.

Termékspecifikációk

Márka: Cotech
Kategória: Fűrészgép
Modell: JFB10

Szüksége van segítségre?

Ha segítségre van szüksége Cotech JFB10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Cotech

Cotech

Cotech JFB10 Útmutató

24 Augusztus 2024
Cotech

Cotech 92502W Útmutató

3 Augusztus 2024
Cotech

Cotech PS002-S Útmutató

28 Július 2024
Cotech

Cotech LS400 Útmutató

25 Július 2024
Cotech

Cotech 92502 Útmutató

25 Július 2024
Cotech

Cotech YT4646 Útmutató

24 Július 2024
Cotech

Cotech MJ10250IV Útmutató

21 Július 2024
Cotech

Cotech YT4755 Útmutató

17 Július 2024
Cotech

Cotech M1Q-65D Útmutató

16 Július 2024
Cotech

Cotech JS 18 Útmutató

13 Július 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1250 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1410 Útmutató

30 Március 2025
Makita

Makita 4334DWDE Útmutató

30 Március 2025
Topex

Topex 16B282 Útmutató

29 Március 2025
Makita

Makita DCS340 Útmutató

29 Március 2025
Makita

Makita DPB181 Útmutató

29 Március 2025
Makita

Makita DPC7301 Útmutató

29 Március 2025
Makita

Makita DPC6401 Útmutató

29 Március 2025