Használati útmutató Comark COMBT1

Comark nincs kategorizálva COMBT1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Comark COMBT1 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Green & red single fl ash (together)
The data logger is in push-to-start
mode
Push button to start
logging
Green single fl ash
The data logger is currently logging
No alarm has been triggered
No action required
Red single fl ash
The data logger is currently logging
The low alarm has been triggered!
Check your logger’s
status using your
Android™ device
Red double fl ash
The data logger is currently logging
The high alarm has been triggered!
Check your logger’s
status using your
Android™ device
No LEDs fl ash
The data logger is stopped or is in
delayed start mode
Check your logger’s
status using your
Android™ device
Comark Bluetooth Logger
Quick Start Guide
© Comark Instruments 2016 Part No. 20484/1
Important safety information
WARNING: Failure to follow these safety instructions could result in fi re,
electrical shock, other injury or damage.
Comark Instruments
www.comarkinstruments.com
www.comarkusa.com
COMBT1
Getting to know your logger
Reading
Bluetooth
connectivity
Maximum logged value
Minimum logged value
Battery status
Temperature scale
Humidity scale
Repairing or Modifying
Never attempt to repair or modify
Comark products. Dismantling them,
other than for the purpose of changing
replaceable batteries, may cause
damage that is not covered under
the warranty. Servicing should only be
provided by an authorized supplier.
Disposal and recycling information
You must dispose of Comark products
in accordance with relevant laws and
regulations. They contain electronic
components and lithium batteries and
therefore must be disposed of separately
from household waste.
Comark Instruments
52 Hurricane Way
Norwich, Norfolk, NR6 6JB
United Kingdom
Tel: +44 (0) 207 942 0712
Comark Instruments
P.O. Box 500
Beaverton, OR 97077, USA
Tel: (503) 643 5204
Off Not connected
Flashing Connection available
Solid Connected
Off Battery OK/charged
Flashing Battery charging
Solid Battery low (connect charger)
Reset maximum and minimum
Delayed start
Push to start
Open the Comark Bluetooth Logger app on your
Android™ device and follow the on-screen instructions
for connecting your logger.
A Bluetooth connection is established after pressing
the button on the logger, then selecting that logger
from the scanned list in the Android™ app. You will be
prompted with a Bluetooth pairing request. Enter the
default logger password that is listed on-screen or on
the back of the logger.
Note: A full guide to operating the Comark Bluetooth Logger app is
available in the product knowledge base on the Comark website:
www.comarkinstruments.com/combt1.
3 Set-up the data logger1 Charge your data logger
Connection status
For a full product data sheet
for your logger, or for more
information visit
www.comarkinstruments.com
Your data logger will arrive partially charged. For
optimum performance, charge it for 24 hours before
use until no battery symbol is displayed. Please use the
USB cable provided.
Battery states
The symbols below show the various battery states:
2 Install Android™ app available on
Google Play™
Before the data logger can be set up,
you must install the Comark Bluetooth
Logger app available on Google
Play™.
The sensor will display a reading, but it
will not record until the app is installed
and setup is complete.
Battery OK/charged Battery low Battery
charging
No symbol displayed Solid Flashing
Wireless connectivity is enabled for two
minutes after pressing the button on the
logger. The Bluetooth symbol will fl ash
to show connection is possible. While
connected, the Bluetooth logo will be
on solidly. During the setup process there
are options to keep the display and/or
Bluetooth module on at all times, but this will
severely limit the battery life.
4 Your logger is now ready
Within the app you can set the sample rate,
temperature scale, temperature and humidity
alarms, Bluetooth power-save settings, LCD settings
and variable start times. Downloaded data will be
saved to your phone’s memory card and can be
viewed any time. This data can then be sent via
email or your preferred cloud service, to another
device or PC for further analysis.
Android™ app features

Termékspecifikációk

Márka: Comark
Kategória: nincs kategorizálva
Modell: COMBT1

Szüksége van segítségre?

Ha segítségre van szüksége Comark COMBT1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Comark

Comark

Comark EVTCRU Útmutató

19 Augusztus 2024
Comark

Comark N2015 Útmutató

19 Augusztus 2024
Comark

Comark A17476 Útmutató

19 Augusztus 2024
Comark

Comark N2012 Útmutató

18 Augusztus 2024
Comark

Comark C9557 Útmutató

18 Augusztus 2024
Comark

Comark N2014 Útmutató

18 Augusztus 2024
Comark

Comark C9501 Útmutató

18 Augusztus 2024
Comark

Comark C9553 Útmutató

18 Augusztus 2024
Comark

Comark C9551 Útmutató

18 Augusztus 2024
Comark

Comark Diligence EV N2000ADP Útmutató

18 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland

Roland SD-20 Útmutató

16 Október 2024
SilverCrest

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024
IFM

IFM TY0058 Útmutató

16 Október 2024
Thule

Thule Kit 186039 Útmutató

16 Október 2024
Blumfeldt

Blumfeldt Solidflor Útmutató

16 Október 2024
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
DAS Audio

DAS Audio AX-112-5 Útmutató

16 Október 2024
Ferplast

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024
AEG

AEG MECK52 Útmutató

16 Október 2024
Black Diamond

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024