Használati útmutató Cocraft LS4T

Cocraft nincs kategorizálva LS4T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cocraft LS4T (40 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/40
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
Ver. 20160210
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-9511 LS4T
LS4T
4T
40-9511
LOG SPLITTER
VEDKLYV VEDKLØYVER
HYDRAULIHALKOJA HOLZSPALTER
VARIABLE SPLITTING LENGTH: 15-37 CM
ENGLISHSVENSKANORSKSUOMIDEUTSCH
3
ENGLISH
Log Splitter LS4T
Art.no 40-9511 Model LS4T
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technicaldata.
If you have any questions concerning technical problems please contact our Customer Services.
Safety
Warning: Whenusing this machine, theincluded safety instructions should always be followed to avoid risk of
fire, electric shock, and personal injury. Readtheentire instruction manual before using themachine and keep it
for future reference. Always pull theplug out of thewall socket before servicing and adjusting themachine.
General safety instructions for your safety and the safety of others
1. Keep theworking areatidy.
Cluttered surfaces and benches invite accidents.
2. Do not use themachine in dangerous environments.
Themachine should not be used on moist or wet surfaces or inrain. Makesure that thework area is welllit.
Whenworking in dusty atmospheres, make sure that theair is adequately circulated. Donot operate electric
machinery in areas where they can cause afire or explosion.
3. Reduce therisk of electric shocks.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators
when using electric machinery.
4. Keep children and bystandersaway.
Keep children and visitors at asafe distance from electric machinery and electric cables in theworkplace.
5. Store electric machinery out of thereach of children.
Store electric machinery/tools locked away in asafe place, away from children.
6. Do not force themachine.
Thecorrect feed rate makes thework better andsafer.
7. Use thecorrect tool for thejob.
Do not force atool to perform atask that it was not designedfor.
8. Wear suitable attire.
Do not wear any loose-fitting clothing, gloves, necklaces, bracelets or other jewellery that can get caught in
movingparts. Non-slip footwear is recommended. Wearahairnet or similar if you have longhair.
9. Always use safety glasses.
Normal glasses are not tough enough to withstand impacts. Useadust mask or dust filter when working in
dusty environments.
10. Connect dust extraction equipment.
If themachine is equipped with dust extraction equipment, ensure that it is connected and used properly.
Makesure to empty thedust bag regularly.
11. Do not abuse themainslead.
Do not carry themachine by its mainslead. Donot yank themains lead to unplug theair compressor, hold
theplug when pulling it out of thesocket. Makesure that themains lead does not come into contact with
heat, oil, or sharpedges.
12. Secure theworkpiece firmly.
Where possible, use clamps or avice. Youcan then operate themachine using twohands. Thisis much
safer than holding theworkpiece in onehand.
13. Do not overreach.
Make sure that you stand steady and balanced at alltimes.
14. Look after yourtools.
Keep blades sharp and clean for thebest and safest performance. Follow themanual’s recommendations
regarding lubrication and replacement of accessories. Inspect themains lead regularly. Ifit is damaged it
should be replaced by aqualified service technician. Inspect all leads and cables regularly to check for any
damage. Makesure that themachine’s handles and controls are clean, dry and free from oil, greaseetc.
15. Turn thepoweroff.
Pull out theplug and push in theemergency stop button before servicing or changing any blades, drill bits,
cutters or sandingdiscs.

Termékspecifikációk

Márka: Cocraft
Kategória: nincs kategorizálva
Modell: LS4T

Szüksége van segítségre?

Ha segítségre van szüksége Cocraft LS4T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Cocraft

Cocraft

Cocraft HS2800N Útmutató

8 Szeptember 2024
Cocraft

Cocraft HI 450 Útmutató

8 Szeptember 2024
Cocraft

Cocraft LS4T Útmutató

8 Szeptember 2024
Cocraft

Cocraft HD 550 Útmutató

16 Augusztus 2024
Cocraft

Cocraft LXC MT18 Útmutató

14 Augusztus 2024
Cocraft

Cocraft HH 2000-E Útmutató

13 Augusztus 2024
Cocraft

Cocraft 40-7818 Útmutató

12 Augusztus 2024
Cocraft

Cocraft HS 50-L Útmutató

12 Augusztus 2024
Cocraft

Cocraft HI 2000 Útmutató

12 Augusztus 2024
Cocraft

Cocraft 40-6925 Útmutató

11 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Beko

Beko BEEPG095 Útmutató

6 Április 2025
Schwaiger

Schwaiger LPBC1000 Útmutató

6 Április 2025
Hortus

Hortus 211-900 Útmutató

5 Április 2025
Navman

Navman MiVue SmartBox III Útmutató

5 Április 2025
Savio

Savio TR-17 Útmutató

5 Április 2025
Kernau

Kernau KSSI 2601 C Útmutató

5 Április 2025
Auray

Auray BAC-4A4HB Útmutató

5 Április 2025
Mr Steam

Mr Steam LEDLITE Útmutató

5 Április 2025
Sony

Sony SMF-405 Útmutató

5 Április 2025
Sony

Sony SMF-700 Útmutató

5 Április 2025