Használati útmutató Cocraft KCM22B

Cocraft Fűrészgép KCM22B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cocraft KCM22B (88 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/88
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
Ver. 20190109
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
31-9034 WLCS38A-375
HC 3800
37 cm3
31-9034
CHAINSAW
MOTORSÅG MOTORSAG
MOOTTORISAHA MOTORSÄGE
ENGLISHSVENSKANORSKSUOMIDEUTSCH
2
ENGLISH
Chainsaw
Art.no 31-9034 Model WLCS38A-375
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technicaldata.
In theevent of technical problems or other queries, please contact our Customer Services (see address details on theback).
Safety
Warning: Readall safety information, warnings and instructions. Failure to read safety information,
warnings and instructions can lead to fire, property damage or serious personal injury.
Persons (including children) whose physical, sensory or mental capability or lack of experience and knowledge means that
they cannot use thesaw in asafe way must not use it without supervision or instruction. Children shall be supervised to
ensure that they do not play with thesaw.
1) Work area safety
a) Cluttered and poorly lit areas invite accidents. Rags, clothing, cables, Keep thework area clean and well illuminated.
gloves or other materials must not be left in theworkarea.
b) Do not use thesaw in explosive environments, such as in thepresence of flammable liquids, gases ordust.
Thesaw can create sparks which may ignite dust orfumes.
c) Keep children and bystanders away from thearea when you are using thesaw. Distractions can cause you to lose control.
2) Personal safety
a) Pay attention to what you are doing and use common sense when using thesaw. Neveruse thesaw if you are tired
or under theinfluence of drugs, alcohol or medication. Onemoment of inattention while using achainsaw may result in
serious injury.
b) Wear protective clothing. Always wear safety glasses. Usingprotective clothing such as dust masks, non-slip safety
shoes, helmets and ear defenders reduces therisk of injury.
c) Remove all service tools/keys before starting thechainsaw. Aspanner or other tool which has been left on arotating
part of thesaw could result in aninjury.
d) Do not overreach. Keepproper footing and balance at alltimes. This will allow you to have better control of thesaw
in unexpected situations.
e) Wear suitable clothing. Donot wear loose-fitting clothing or jewellery. Keephair, clothes and gloves away from
movingparts. Loose-fitting clothes, jewellery or long hair could become caught in movingparts.
3) Use and maintenance of thesaw
a) Do not force thesaw. Makesure that thesaw is designed for thework you are about to perform. Thesaw must only be
used as described in this instruction manual.
b) Do not use thesaw if thepower switch is not functioning properly. Anysaw that cannot be controlled by thepower
switch is dangerous and must be repaired.
c) Store chainsaws that are not being used out of children’sreach. Donot allow people who are unfamiliar
with chainsaws or these instructions to operatethem. Chainsaws can be dangerous if they fall into thehands of
inexperiencedusers.
d) Properly maintain thesaw. Checkfor misalignment, binding of moving parts, broken parts or anything else which
might affect theoperation of thesaw. Ifany damage is noticed, have thesaw repaired beforeusing. Manyaccidents are
caused by poorly maintainedsaws.
e) Properly maintained chains with sharp edges are easier to control.Keep thechain sharp andclean.
f) Use thesaw, and any accessories in accordance with these instructions, taking into account theworking conditions
and thework to be performed. Useof thesaw for apurpose other than that for which it is intended could result in
adangerous situation.
• Keep all parts of your body away from thesaw chain once thesaw has been started. Before starting thesaw,
check that thesaw chain is not in contact with any objects and can run freely. Evenabrief moment of inattention
can lead to thesaw chain fastening in anitem of clothing or abodypart.
• Always hold thesaw with your right hand on therear handle and your left hand on thefront handle. Neverhold
thesaw in any other way, it increases therisk of personal injury.
3
ENGLISH
• Use protective eyewear and hearing protection. Protective equipment for hands, head, legs and feet are also
recommended. Wearing thecorrect type of safety clothing reduces therisk of personal injury from thesaw chain or
ying debris from thesawing.
• Never climb atree to operate thechainsaw. Usingachainsaw in atree can result in personal injury.
• Make sure that you stand on arm, level surface when you use thesaw. Slippery and unstable platforms such as
ladders can result in aloss of balance and loss of control over thesaw.
• Be prepared for branches under tension to spring back during thesawing process. Whenthetension in branches
isreleased they can spring back and strike chainsaw operators causing them to lose control of theirsaws.
• Be very careful when cutting brush and saplings. Thintwigs can get caught in thesaw chain and be projected
towards you or cause you to lose your balance.
• Always carry thechainsaw by thefront handle with theguide bar pointing away from yourbody. Thescabbard
must always be tted when thechainsaw is being transported or stored. Usingthechainsaw correctly will reduce
thelikelihood of contact with thesaw chain when it is in motion.
• Follow theinstructions regarding lubrication, chain tensioning and changing of accessories. Animproperly
tensioned or lubricated chain increases therisk of chain breakage or kickback.
• Always keep thehandles dry, clean and free of oil and grease. Slippery handles covered in oil can cause you to lose
control over thesaw.
• Cut woodonly. Thesaw is not designed for sawing plastic, hardboard or other building materials not made
ofwood. Usingthesaw to saw amaterial it was not designed to saw could lead to adangerous situation.
Causes and prevention of kickback
Kickback can occur when thetip of theguide bar contacts anobject or if thesaw cut closes and traps thechain.
If thetip of theguide bar touches anobject it can cause areaction which throws theguide bar back up towards theoperator.
Pinching thesaw chain along thetop of theguide bar may push theguide bar rapidly back towards theoperator.
All of these reactions may cause you to lose control of thesaw which could result in serious personal injury.
Do not rely solely on thesafety features tted to thesaw. Whenusing thesaw you yourself must take precautions to prevent
accidents and injuries. Kickback is caused either by poor maintenance, anincorrect sawing method or using thesaw for
thewrong purpose. Thiscan be avoided by following thefollowing safety precautions:
• If you understand what causes kickback therisk of being surprised and losing control will be reduced.
• Hold thesaw rmly with bothhands. Holdthesaw with your right hand on therear handle and your left hand on
thefront handle. Maintain arm grip with thumbs and ngers encircling thehandles and your arms and body
positioned in such away that you can resist kickback forces should they occur. You can control theforces arising
from akickback if thecorrect precautions aretaken. Neverlet go of thesaw when theengine is running.
• Make sure that thework area is free of obstacles. Neverlet thetip of theguide bar contact atree trunk, branch or
other object.
• Always saw using full throttle.
• Do not overreach and do not saw above shoulder height. Thiswill help you to prevent thetip of theguide bar from
accidentally coming into contact with objects and and cause you to lose control over thesaw if something unexpected should
happen.
• Follow themanufacturer’s instructions regarding sharpening and maintenance of thesawchain. Ablunt chain also
increases thelikelihood of kickback.
• Use only those replacement parts, guide bar and saw chain recommended by themanufacturer. Usingaguide bar
or saw chain of theincorrect type can lead to kickback or chain breakage.
WARNING: BEWARE OF KICKBACK!
Warning: Kickback poses aserious accident risk and can cause theoperator to lose control of thesaw.
Thiscan result in serious injury to theoperator and any bystanders. Bevigilant at alltimes.
Kickback caused by thenose or tip of theguide bar touching anobject or by thewood closing
and pinching thesaw chain in thecut is themain cause of chainsaw accidents.

Termékspecifikációk

Márka: Cocraft
Kategória: Fűrészgép
Modell: KCM22B

Szüksége van segítségre?

Ha segítségre van szüksége Cocraft KCM22B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Cocraft

Cocraft

Cocraft PRO RT18-PL Útmutató

12 Január 2025
Cocraft

Cocraft HB 10-L Útmutató

25 Augusztus 2024
Cocraft

Cocraft HL6.5T Útmutató

14 Augusztus 2024
Cocraft

Cocraft PRO RL1100-T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HB 380-4T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HCI 2400-T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HB430-2T Útmutató

9 Augusztus 2024
Cocraft

Cocraft LXC CS18 Útmutató

7 Augusztus 2024
Cocraft

Cocraft PRO Edition JL750-P Útmutató

6 Augusztus 2024
Cocraft

Cocraft HR 850-T Útmutató

6 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025