Használati útmutató Cisco AT6400 AllTouch (FTC)

Cisco távirányító AT6400 AllTouch (FTC)

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cisco AT6400 AllTouch (FTC) (12 oldal) a távirányító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
“We Keep You Connected”
UNIVERSAL REMOTE
CONTROL GUIDE
2
Your new AT6400 AllTouch Infrared (IR) Universal Remote Control (remote) is a true universal remote,
functioning as four remotes in one. As one example, you can use this remote to operate your Set Top
Box, your TV, and two other devices, such as a DVD player and VCR.
1. IMPORTANT INFORMATION ABOUT YOUR REMOTE
Your remote is initially programmed to only operate your set top box. Therefore, you must program
the remote to operate your TV, VCR, DVD, or other devices. See PROGRAM THE REMOTE TO
CONTROL MY DEVICES to learn how to enter device codes and program your remote.
NOTE: You must use the IR remote within line of sight of the set top box to operate the set top box
correctly.
2. HOW DOES A UNIVERSAL REMOTE CONTROL WORK?
You tell the remote which type of device you want to operate using the four keys arched across the
top of the remote. These keys, known as mode keys, are labeled STB (Set Top Box), TV, DVD, and AUX.
Each mode key is associated with a specic device. As an example, after programming the remote,
if you want the remote to operate your TV, you simply press the TV key. Other keys you press on the
remote, thereafter, should operate your TV. Want to switch the remote to operate a dierent device?
Just press the mode key for the next device you want to operate. In this guide, you will learn which
types of devices you can control and how to program the remote to control your specic devices.
3. WHERE DO I START?
Before you begin using your remote, complete the following initial setup tasks.
INSTALL THE BATTERIES
The remote requires two AA batteries (alkaline recommended). A diagram in the battery
compartment of the remote indicates proper placement of the batteries. When the batteries are
properly installed, the light on the remote blinks each time a key is pressed.
VISIT THE REMOTE CONTROL QUICK REFERENCE SECTION
Use the Remote Control Quick Reference section on Page 12 of this guide to familiarize yourself with
the remote and the functions of its various keys. Knowing the function and location of the keys on
the remote will assist you when you are programming the remote.
4. PROGRAM THE REMOTE
To learn how to program your remote, refer to the sections
What Devices Can I Control, What Devices
Do I Want to Control, Program The Remote To Control My Devicesand
for further instructions.
UNIVERSAL REMOTE CONTROL
3
5. FIND A PLACE TO STORE YOUR REMOTE
Keeping up with one remote is much easier than keeping up with four or ve remotes. However, it is
still a good idea to nd a storage location for your remote. The AT6400 is not a toy. It should be kept
out of the reach of children under the age of 6 years.
6. PROGRAM THE REMOTE TO CONTROL MY DEVICES
Your remote is initially programmed to only operate your Set Top Box. You will need to set up the
remote to operate your other devices using its TV, DVD, VCR, and AUX modes. The TV key may
be programmed to operate a standard or high-denition television (HDTV). The key may DVD
be programmed to operate a DVD player. The key may be programmed to operate a VCR, a AUX
receiver, an amplier, or a Home Theater in a Box (HTIB) system. If the remote provides only limited
functionality for a device, you can look for a code that provides more functionality. Refer to the code
tables at the end of this guide to locate additional programming codes.
Note: You have the option to assign some remote keys to operate one device type only. For example, you
may want to assign volume control to the TV only. If this is the case, you can reprogram power, volume,
and channel control using procedures found later in this guide.
7. ASSIGNING A DEVICE CODE TO A MODE KEY
Refer to the code tables at the end of this guide to locate the information for the device you want to
control.
NOTE: If your device is not listed, you may be able to program the remote using the Auto-Search
function. Go to What If None of the Codes Work on page 15 for instructions.
1. Turn on the device that you want to assign a mode key.
2. Press and hold the appropriate mode key (TV, , ) on the remote, and then press DVD or AUX
and hold the key.OK
3. Release both keys and the mode keys blink twice.
4. Enter the rst 4-digit setup code for the device using the numeric keys (0-9) on the remote.
The mode key blinks three times to indicate that the code entry was accepted.
NOTES:
   • Whenaninvalidcodeisentered,theselectedmodekeydisplaysalongashtoindicate
that you have not entered the code correctly.
   • Shouldtheremotetime-outbeforeyoucompletethecodesetup,youmuststartover.
    ThisisindicatedbyonelongashoftheredLED.
UNIVERSAL REMOTE CONTROL

Termékspecifikációk

Márka: Cisco
Kategória: távirányító
Modell: AT6400 AllTouch (FTC)

Szüksége van segítségre?

Ha segítségre van szüksége Cisco AT6400 AllTouch (FTC), tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Cisco

Cisco

Cisco TRC5 Útmutató

19 Július 2024
Cisco

Cisco AT6400 AllTouch (FTC) Útmutató

17 Július 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Medion

Medion MD 80383 - 8 in 1 Útmutató

16 Január 2025
Toshiba

Toshiba CT-CH9 II Útmutató

16 Január 2025
Motorola

Motorola DRC-425 Útmutató

16 Január 2025
Panasonic

Panasonic EUR7502XC0EG Útmutató

15 Január 2025
Delta

Delta GT 9000 Útmutató

15 Január 2025
Eminent

Eminent EM1041 Útmutató

15 Január 2025
Sonos

Sonos Controller for Android-smartphones Útmutató

15 Január 2025
Sonos

Sonos Controller voor Mac of pc Útmutató

15 Január 2025
Sonos

Sonos Control Útmutató

15 Január 2025
Sonos

Sonos Controller for Android Tablets Útmutató

14 Január 2025