Használati útmutató Chief TPP2301

Chief Lapos panel támogatás TPP2301

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief TPP2301 (7 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
T
russ
Pitch-Adjustable (TPP) Mount
BEFORE YOU BEGIN
•WARNING: TO PREVENT PERSONAL INJURY, THOROUGHLY STUDY ALL INSTRUCTIONS AND ILLUS-
TRATIONS BEFORE YOU BEGIN TO INSTALL THE UNIT. PAY PARTICULAR ATTENTION TO THE “IMPOR-
TANT WARNINGS AND CAUTIONS” ON PAGE 1.
•CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the unit. Pay particular attention to the
“IMPORTANT WARNINGS AND CAUTIONS” on Page 1.
• The maximum weight to be installed on the TPP is 150 pounds (68.04 Kg).
• If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
I N S T R U C T I O N M A N U A L
The Truss Pitch-Adjustable (TPP) mount is a perfect
solution exhibit, retail and digital signage applications.
The mount is quick, easy and versatile.
The TPP accommodates a large range of truss dimen-
sions (up to 14” O.D.), includes security options and pro-
vides flexible feature to achieve a custom installation
installation. The exclusive Q-Latch™ Mounting System
secures the LArge Flat Panel Display with a lockable
latch to confirm mount stability and integrated security
allows the display to be locked to the mount by adding a
padlock.
Your display can be mounted portrait or landscape and
four pitch adjustments, up or down, are available as pre-
set, locking positions (0, 5, 10 or 15 degrees).
LOGO
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000010 (Rev. B)
©2003 Chief Manufacturing
www.chiefmfg.com
Printed in USA 05-04
Instruction Manual TPP
1
IMPORTANT WARNINGS AND CAUTIONS!
• WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
• CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
• WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment. If the structural members
can not support this weight, reinforce the structural members before installing the mount.
•WARNING: The installer is responsible for verifying that the structure to which the TPP is anchored will safely sup-
port the combined load of all attached components or other equipment.
•WARNING: The weight of the display must not exceed 150 lbs. (68.04 kg), the maximum load capacity of the TPP.
• WARNING: Be aware during the installation that there are no pinch points for people and for electrical wiring.
• WARNING: Be aware of the potential for personal injury or damage to the mount if it is not adequately mounted.
•CAUTION: Check the unit for shipping damage before you begin the installation.
• CAUTION: Changes or modifications not approved by Chief Manufacturing could void user’s warranty.
TOOLS REQUIRED FOR INSTALLATION
•Socket set with extension
•Open wrenches
NOTE: Other tools may be required depending on the
method of installing the lift in the ceiling.
CONTENTS
PARTS ........................................................................ 2
INSPECT THE MOUNT BEFORE INSTALLING ....... 3
TPP INSTALLATION ................................................. 3
Assembly ................................................................... 3
Mount the Display ....................................................... 5
Tilt Adjustment ........................................................... 5
Remove the Display ................................................... 6
2
Instruction Manual TPP
(1) PLATE, back (1) SCREW, pan head, 10-24
(1) PLATE, assembly, pitch-adjustable (4) SCREW, cap, hex head, 5/16-18 X 1/2”
(1) PLATE, face (2) NUT, Stover locknut, 3/8-16
(1) FLAG, latching (1) SPACER, Nylon, .38 X .194 X .032”
(1) NUT, Nylock, 10-24 (2) WASHER, flat, 3/8”
(3) WASHER, VHMW
PARTS

Termékspecifikációk

Márka: Chief
Kategória: Lapos panel támogatás
Modell: TPP2301

Szüksége van segítségre?

Ha segítségre van szüksége Chief TPP2301, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Lapos panel támogatás Chief

Chief

Chief PFQUB Útmutató

2 Szeptember 2024
Chief

Chief VPAU Útmutató

2 Szeptember 2024
Chief

Chief MFQUB Útmutató

31 Augusztus 2024
Chief

Chief PFMUB Útmutató

31 Augusztus 2024
Chief

Chief RXF3 Útmutató

31 Augusztus 2024
Chief

Chief PNR2536B Útmutató

19 Augusztus 2024
Chief

Chief K4G210B Útmutató

19 Augusztus 2024
Chief

Chief MF26000B Útmutató

19 Augusztus 2024
Chief

Chief FSB018BLK Útmutató

19 Augusztus 2024
Chief

Chief TPK1 Útmutató

19 Augusztus 2024

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás

NEC

NEC PDVWXUN 55 P Útmutató

15 Október 2024
Insignia

Insignia NS-STV3N1705 Útmutató

15 Október 2024
Abus

Abus BW8060 Útmutató

4 Október 2024
One For All

One For All DM 4110 Útmutató

2 Október 2024
NEC

NEC PD01CMB Útmutató

2 Október 2024
One For All

One For All DM 7220 Útmutató

1 Október 2024
One For All

One For All DM 2220 Útmutató

1 Október 2024
Kogan

Kogan KASMM39S12A Útmutató

1 Október 2024
Kogan

Kogan KATWM70TLMA Útmutató

1 Október 2024
Kogan

Kogan KADMM46G24A Útmutató

1 Október 2024