Használati útmutató Chief KRA202B

Chief Lapos panel támogatás KRA202B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief KRA202B (4 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

dual mount

single display mount

Grommet Mounting Kit

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

KRA202

KRA202 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! The KRA202 can ONLY be mounted

onto desks measuring between 3/4" and 3 1/2" in depth!

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

DESKTOP THICKNESS

RANGE .75- 3.50" [19.1 - 88.9]

DESK BASE SHOWN

FOR CLARITY

(NOT INCLUDED)

DESK SURFACE

Installation Instructions KRA202

TOOLS / PARTS FOR INSTALLATION

ASSEMBLY AND INSTALLATION

1. Remove desk clamp from mount by loosening button head

cap screw until clamp is completely disengaged from the

bolt. (See Figure 1)

NOTE: Button head cap screw can be removed or left loosely

in its hole after clamp is removed.

2. Manuever clamp so that it is totally removed from desk

mount. (See Figure 1)

Figure 1

3. Locate a flat surface (thickness of 3/4" minimum to 3 1/2"

maximum) on which to mount the column plate.

4. If mounting hole does not already exist on desk, drill

mounting hole in desk at desired mounting location.

IMPORTANT ! : Mounting hole must be a minimum of

5/16" in diameter and a maximum of 2"!

5. Thread 5/16-18" hex flange nut (C) onto 5/16-18 x 5" hex

head bolt (B). (See Figure 2)

6. Position mount on desk so that threaded hole is centered

over grommet hole. (See Figure 2)

7. Insert 5/16-18 x 5" bolt (B) through grommet bracket (A),

grommet hole and thread into center hole on underside of

mount as far as possible. (See Figure 2) and (See Figure 3)

Figure 2

8. Tighten hex flange nut (C) until grommet bracket (B) is

tightened against underside of desk. (See Figure 3)

Figure 3

9. Complete the installation following the mount installation

instructions.

1/2"

(if hole needs to be created)

3/16"

(included with mount)

A (1)

[grommet

bracket]

B (1)

5/16-18 x 5"

C (1)

5/16-18"

single display mount

dual mount

(B) (C)

(A)

(mounting arms not shown for clarity)

(mounting arms and desk not shown for clarity)

dual mount

single display mount

(C)

center hole

grommet hole

Termékspecifikációk

Márka:	Chief
Kategória:	Lapos panel támogatás
Modell:	KRA202B

Szüksége van segítségre?

Ha segítségre van szüksége Chief KRA202B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Lapos panel támogatás Chief

Chief MWCU Útmutató

3 Április 2025

Chief KITXWXSM1U Útmutató

3 Április 2025

Chief RLXT3 Útmutató

3 Április 2025

Chief MIWRFUB Útmutató

16 Január 2025

Chief TILD1X5NE1-M Útmutató

16 Január 2025

Chief TILD1X3NE1-R Útmutató

16 Január 2025

Chief TILD1X4NE1-L Útmutató

16 Január 2025

Chief PWRIWUB Útmutató

16 Január 2025

Chief RSMBU Útmutató

29 December 2024

Chief RPA640 Útmutató

29 December 2024

Útmutatók Lapos panel támogatás

Legújabb útmutatók Lapos panel támogatás

Konig KNM-MM20 Útmutató

8 Április 2025

Ergotron Neo-Flex Widescreen Stand Útmutató

3 Április 2025

Ergotron Neo-Flex Cantilever Útmutató

3 Április 2025

Ergotron All-In-One Lift Stand Útmutató

3 Április 2025

Ergotron DS100 Dual Monitor Desk Stand Útmutató

3 Április 2025

Ergotron DS Series DS100 Quad Monitor Desk Stand, Horizontal Útmutató

3 Április 2025

Ergotron LX Series Desk Mount LCD Arm, Tall Pole Útmutató

3 Április 2025

Ergotron LX Series Dual Stacking Arm Útmutató

3 Április 2025

Ergotron 100 Series Double Pivot Útmutató

3 Április 2025

Ergotron Convert-to-LCD & Laptop Kit Útmutató

3 Április 2025