Használati útmutató Chief DGC65S
Chief
Lapos panel támogatás
DGC65S
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief DGC65S (17 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/17

Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8831-000011 Rev C
©2008 Milestone AV Technologies
www.chiefmfg.com
06/08
I N S T A L L A T I O N I N S T R U C T I O N S
DGC Series Display Guard™ Enclosures
DGC32, DGC42, DGC-50 and DGC-65
The Display Guard series of enclosures are designed to protect flat panel displays in high-risk
environments. The series is available in three sizes:
DGC-32: designed for 32-inch display models
DGC-42: designed for 42-inch display models
DGC-50: designed for 50-inch display models
DGC-65: designed for 65-inch display models
The enclosures are supplied as a fixed wall display enclosure. Accessories, such as the ceiling mount and
post assembly, are sold separately.
These enclosures provide excellent security and protection while providing easy viewing and access for
adjustments and display maintenance. The enclosures are also equipped with a security locks to protect the
display from inadvertent scratches and guard against theft.
Display Guard – Closed Display Guard – Opened
BEFORE YOU BEGIN
CAUTION: To prevent damage to your display and Display Guard, which could affect or void the
Factory warranty, thoroughly study all instructions and illustrations before you begin to install
the mount. Pay particular attention to the Warnings and Cautions in this document.
CAUTION! The maximum weight capacity of the Display Guard fixed wall mounts is located in Table 2.
Chief® is a registered trademark of Milestone AV Technologies, Inc. All rights reserved.

Installation Instructions DGI-42 and DGI-50
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you
do not follow the corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the
structural members can support a redundant weight factor five times the total
weight of the equipment. If not, reinforce the structure before installing the
mount.
WARNING If the Display Guard is not installed correctly, there is the potential for personal
injury or damage to the unit.
WARNING The installer is responsible for verifying that the wall to which the Display
Guard will be anchored will safely support the combined load of all attached
components or other equipment.
WARNING Weight Specifications (see Table 2).
WARNING Watch out for pinch points. Do not put your fingers between movable parts.
WARNING Make sure the mount is correctly oriented.
CAUTION Check the unit for shipping damage before you begin the installation.
CAUTION Use only the bolts that are provided and do not over-tighten the bolts.
EXTERIOR DIMENSIONS
Table 1 and Figure 1 provide the exterior dimensions of the Display Guard.
Table 1. Exterior Dimensions
Description Enclosure Model
Exterior
dimensions 32” 42” 50” 65”
Height 27.63 31.94 36.94 44.38
Width 38.74 47.94 55.94 69.64
Depth 19.55 23.01 23.05 21.21
Specifications are subject to change without notice
Figure 1. Exterior Dimensions of Display Guard
Depth
Height
Width

Installation Instructions DGI-42 and DGI-50
3
WEIGHT SPECIFICATIONS
Table 2 provides the weight specifications for Display
Guard models.
Do not exceed the maximum support weight, defined as
the combined load of all attached components that can be
installed in the Display Guard.
Table 2. Weight Specifications
Model Enclosure Weight
Fixed Wall Mount
Max. Support Weight
DGC-32 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-32 145 lbs (65.78 kg) 400 lbs (181.4 kg)*
DGC-42 125 lbs (56.70 kg) 400 lbs (181.4 kg)*
DGCA-42 175 lbs (79.38 kg) 400 lbs (181.4 kg)*
DGC-50 155 lbs (70.31 kg) 400 lbs (181.4 kg)*
DGCA-50 195 lbs (88.45 kg) 400 lbs (181.4 kg)*
DGC-65 235 lbs (106.6 kg) 600 lbs (272.2 kg)*
DGCA-65 295 lbs (133.8 kg) 600 lbs (272.2 kg)*
* Fixed wall mount maximum support weight capacity
includes combined weight of display being installed and
enclosure.
TOOLS REQUIRED FOR
INSTALLATION
Allen wrench set
Socket wrench set
NOTE: Other tools may be required depending on your
method of installation.
PARTS LIST
Unpack the shipping carton and check for the contents
listed in Table 3 and shown in Figure 2 on Page 4.
Table 3. Parts List
32” 42” 50” 65”
REF DESCRIPTION QTY QTY QTY QTY
10 GAS SPRINGS 1 1 1 1
20 DISPLAY COVER 1 1 1 1
30 HOUSING with wall brackets 1 1 1 1
40 DISPLAY INTERFACE 1 1 1 1
Termékspecifikációk
Márka: | Chief |
Kategória: | Lapos panel támogatás |
Modell: | DGC65S |
Szüksége van segítségre?
Ha segítségre van szüksége Chief DGC65S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief

3 Április 2025

3 Április 2025

3 Április 2025

16 Január 2025

16 Január 2025

16 Január 2025

16 Január 2025

16 Január 2025

29 December 2024

29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás Samsung
- Lapos panel támogatás Marantz
- Lapos panel támogatás Pioneer
- Lapos panel támogatás StarTech.com
- Lapos panel támogatás Sven
- Lapos panel támogatás HP
- Lapos panel támogatás BenQ
- Lapos panel támogatás HQ
- Lapos panel támogatás Fellowes
- Lapos panel támogatás Digitus
- Lapos panel támogatás My Wall
- Lapos panel támogatás Insignia
- Lapos panel támogatás Crimson
- Lapos panel támogatás V7
- Lapos panel támogatás GPX
- Lapos panel támogatás Proaim
- Lapos panel támogatás Hitachi
- Lapos panel támogatás Kanto
- Lapos panel támogatás Ewent
- Lapos panel támogatás Konig & Meyer
- Lapos panel támogatás Mount-It!
- Lapos panel támogatás Sanus
- Lapos panel támogatás Atlantic
- Lapos panel támogatás Manhattan
- Lapos panel támogatás Kogan
- Lapos panel támogatás Ultimate
- Lapos panel támogatás One For All
- Lapos panel támogatás Peerless-AV
- Lapos panel támogatás Abus
- Lapos panel támogatás Iiyama
- Lapos panel támogatás AKAI
- Lapos panel támogatás Konig
- Lapos panel támogatás 3M
- Lapos panel támogatás Pyle
- Lapos panel támogatás NEC
- Lapos panel támogatás Siig
- Lapos panel támogatás Panduit
- Lapos panel támogatás Equip
- Lapos panel támogatás Luxor
- Lapos panel támogatás Valueline
- Lapos panel támogatás Gabor
- Lapos panel támogatás Anthro
- Lapos panel támogatás Schwaiger
- Lapos panel támogatás Multibrackets
- Lapos panel támogatás Planar
- Lapos panel támogatás Speaka
- Lapos panel támogatás Newstar
- Lapos panel támogatás Vogel's
- Lapos panel támogatás Heckler
- Lapos panel támogatás Acco
- Lapos panel támogatás Reflecta
- Lapos panel támogatás Icy Box
- Lapos panel támogatás SilverStone
- Lapos panel támogatás Vision
- Lapos panel támogatás Kensington
- Lapos panel támogatás Nabo
- Lapos panel támogatás Techly
- Lapos panel támogatás BlueBuilt
- Lapos panel támogatás Da-Lite
- Lapos panel támogatás Steren
- Lapos panel támogatás Barkan
- Lapos panel támogatás InFocus
- Lapos panel támogatás Metronic
- Lapos panel támogatás Ematic
- Lapos panel támogatás Apart
- Lapos panel támogatás BakkerElkhuizen
- Lapos panel támogatás Wentronic
- Lapos panel támogatás Peerless
- Lapos panel támogatás SMS Smart Media Solutions
- Lapos panel támogatás Monoprice
- Lapos panel támogatás Erard
- Lapos panel támogatás Ergotron
- Lapos panel támogatás Premier
- Lapos panel támogatás Atdec
- Lapos panel támogatás Bell'O
- Lapos panel támogatás B-tech
- Lapos panel támogatás Premier Mounts
- Lapos panel támogatás Cabstone
- Lapos panel támogatás Elite Screens
- Lapos panel támogatás Kondator
- Lapos panel támogatás Bretford
- Lapos panel támogatás SmartMetals
- Lapos panel támogatás Unicol
- Lapos panel támogatás Zaor
- Lapos panel támogatás Dataflex
- Lapos panel támogatás CTA Digital
- Lapos panel támogatás Amer
- Lapos panel támogatás Avteq
- Lapos panel támogatás Walker Edison
- Lapos panel támogatás LTN Technologies
- Lapos panel támogatás Helder
- Lapos panel támogatás NeoMounts
- Lapos panel támogatás ViewZ
Legújabb útmutatók Lapos panel támogatás

8 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025

3 Április 2025