Használati útmutató Chacon 54442

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chacon 54442 (36 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/36
User manual / Mode d’emploi /
Gebruiksaanwijzing / Manual de uso
Manual de instruções
Ref. : 54442
v1.0 201008
www.chacon.com
Registering your warranty
0. Introduction
a. Main functions
b. Common mode
1. Use
To register your warranty, ll in the online form at www.
chacon.com/warranty
Thank you for using this product
• Please read the instructions carefully before using
the device.
• Do not attempt to dismantle or repair the product
yourself as it will invalidate the warranty.
• Please keep original product documents for the entire
duration of the product’s life
• Four weather forecasts: sunny, slightly cloudy, cloudy
and rainy.
• Indoor and outdoor temperature and humidity
• Built-in alarm and alarm reminder
• Built-in clock and calendar
• History of maximum and minimum temperatures and
humidity
• One wireless outdoor probe included
-Press “MODE” once to check the time and alarm.
-Hold “MODE” for seconds to enter setting mode (see
2. Time setting).
-Press “MAX/MIN” once to check the maximum and
minimum of temperature and humidity.
-Press “UP” once for channel temperature one by one:
CH1 -> CH2 -> CH3
1x 1x1x 1x
1,8m USB Cable
c. Alarm setting
d. Sensor
-Hold ““UP”” for seconds to clear the current channel
temperature and receive the RF.
-Press “DOWN” for temperature C°/F° switchover.
-press “SNZ/LIGHT”, to activate the backlight for 8
seconds
-Press “MODE” once to switch the display mode to
alarm mode.
-Hold “MODE” for seconds to enter the setting mode.
-Setting order: hour -> minute -> SNZ time (1-20
minutes, the default snooze time is 5minutes) -> exit
-Use “UP” and “DOWN” to set the alarm.
-Press “MODE” to conrm setting and go to the next
setting.
-Without any key operation in 8 seconds, the setting
values saved and the setting quits automatically.
-In alarm mode, press “UP” to turn the alarm on/o.
When on, the symbol (()) appears.
-When the alarm sounds, press “SNZ/LIGHT” to prolong
for 5 minutes, press any other key to exit.
-Insert batteries (and change channel if needed).
-After power on and temperature test, the sensor will
automatically connect to the station within 3 minutes,
the symbol (()) twinkling.
-Press “UP” to select the channel to see the outside
temperature.
-Under the common mode, press “UP” for 2 seconds to
clear up the temperature values of current channel and
update the values.
-If the signal is lost, remove and replace the batteries
from the sensor.
2. TECHNICAL SPECIFICATIONS
-3x LR3 (AAA) 1.5V batteries (not included) + 2x LR3
(AAA) 1.5V batteries (not included)
-USB power connector (to keep the backlight always
on).

Termékspecifikációk

Márka: Chacon
Kategória: Időjárás állomás
Modell: 54442

Szüksége van segítségre?

Ha segítségre van szüksége Chacon 54442, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Időjárás állomás Chacon

Chacon

Chacon 54442 Útmutató

28 December 2024
Chacon

Chacon 54418 Útmutató

28 December 2024
Chacon

Chacon 54420 Útmutató

22 Július 2024

Útmutatók Időjárás állomás

Legújabb útmutatók Időjárás állomás