Használati útmutató Celestron Elements FireCel+

Celestron power bank Elements FireCel+

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Celestron Elements FireCel+ (2 oldal) a power bank kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

Thank you for purchasing the Celestron FireCel+! FireCel+ is

an essential multi-use tool designed to be used in the elements.

Its portable, high-capacity power pack can supply power to

your cell phone, MP3 player, and many other USB-powered

devices. A built-in ﬂashlight provides illumination while the

hand warmer keeps you comfortable in cold conditions.

WARNING: Read all instructions and warnings thoroughly

before using FireCel+. Improper use of this product

may result in product damage, excess heat, toxic

fumes, ﬁre or explosion. Do not allow children to

use this product without proper adult supervision.

INCLUDED IN THE BOX ARE:

1 - FireCel

1 - USB Cable with Mini USB connection

1 - Carrying strap

1 - Soft carrying bag

FIRECEL

1. Four super bright LEDs (two red, two white)

2. Six indicator lights

• Four blue LEDs display FireCel+’s battery level

• One green LED indicates a device is being charged

• One red LED indicates heat mode is in use

3. Flashlight on/off button

4. Multi-function button

5. Aluminum heating element

6. Mini USB port

7. USB 2.0 port

1. CHARGING THE INTERNAL LITHIUM

ION BATTERY

Your FireCel+ 3-in-1 device has an internal, 5200 mAh recharge-

able lithium ion battery, which allows for up to 12 hours of continu-

ous heat when using the hand warmer at a constant temperature

of 40° to 45° Celsius (104° to 113° Fahrenheit). FireCel+ also

charges multiple USB-powered devices, and is equipped with a red

and white LED ﬂashlight.

Your FireCel+ ships with a partial charge, but you should charge it

completely before using for the ﬁrst time.

Follow these steps to charge the internal lithium ion battery:

1. Attach the Mini USB connector end of the included USB cable to

the Mini USB “in” port (6) on your FireCel+.

2. Plug the standard USB plug end of the cable into a USB port on a

PC, laptop, car charger or USB 5V-500mA adapter plug.

3. Once plugged in, the four blue LEDs (2) will start to blink, indi-

cating that charging is in progress.

4. Charging is complete when all four blue LEDs (2) stop blinking.

NOTE: FireCel+ is designed with overcharge protection to prevent

damage to the internal battery.

2. USING THE HAND WARMER FEATURE

• First, press and release the multi-function button (4) to check

the power level. The blue indicator lights will display the current

battery level. (The number of illuminated LEDs corresponds to the

charge level: (1) 25%, (2) 50%, (3) 75%, (4) 100%.)

• Press the multi-function button (4) again to activate one side of

the hand warmer. The green and red indicators will illuminate. In

this mode, you can also charge an external device. See section

3 below.

• Press the multi-function button (4) again to activate both sides of

the hand warmer. Only the red LED indicator will illuminate. You

cannot charge an external device in this mode.

• Press the multi-function button (4) one more time to turn off the

hand warmer.

3. CHARGING AN EXTERNAL DEVICE

• First, press and release the multi-function button (4) to check

the power level. The blue indicator lights will display the current

battery level. (The number of illuminated LEDs corresponds to the

charge level: (1) 25%, (2) 50%, (3) 75%, (4) 100%.)

• Plug your device’s USB charging cable into the USB 2.0 port (7)

on FireCel+.

• Press and release the multi-function button (4) again. The green

indicator light will illuminate and your device should indicate it

is charging.

• When charge is complete, FireCel+ will automatically power off.

To manually stop the charging process, remove the charging

cable from FireCel+.

4. USING THE FLASHLIGHT FEATURE

• Press the ﬂashlight on/off button (3) to turn on ﬂashlight mode

1 (red LEDs only). Continuing to press the ﬂashlight ON/OFF

button (3) will advance through the modes in this order:

1. Red LEDs only

2. White LEDs only

3. Red LEDs blinking

4. White LEDs blinking

5. Red and White LEDs SOS

6. OFF

5. SPECIFICATIONS

BATTERY: 5200mAH/3.7V Rechargeable Lithium Ion

(2 x 2600 mAh)

INPUT VOLTAGE: 5V- 500 mAH to 2A

(Smart Charge Technology)

OUTPUT VOLTAGE: 5V- 1A

PORTS: (1) MINI USB (for charging internal battery)

(1) STANDARD USB 2.0 (for charging external devices)

INTERNAL BATTERY CHARGE TIME

Power supply USB-PC/CC 500mA: 11.0 hours

Power supply 5v/1A/CC 900 mAh: 6.5 hours

Power supply 5V/2A/CC 1.8A: 3.6 hours

MINIMUM NUMBER OF RECHARGES > 500

LED STATUS INDICATORS

(4) Blue LEDs indicate internal battery status

(1) Red LED indicates hand warmer mode

(1) Green LED indicates charging external device

HAND WARMER TEMPERATURE RANGE

40° TO 45° Celsius (104° TO 113° Fahrenheit)

HAND WARMER CONTINUOUS USE TIME

Single Side Mode: 12 hours continuous use

Dual Side Mode: 6 hours continuous use

(Based on fully charged battery)

FLASHLIGHT MODES:

1. Red LEDs only

2. White LEDs only

3. Red LEDs blinking

4. White LEDs blinking

5. Red and White LEDs SOS

OPERATING TEMPERATURE RANGE:

0° to 45° Celsius (32° to 113° Fahrenheit)

STORAGE TEMPERATURE RANGE:

68° to 77° Fahrenheit (optimal)

POWER DELIVERY CHART

iPhone 5s (1540 mAh): 2 hours (2.5 times)

iPhone 4s (1400 mAh): 1.8 hours (2.7 times)

iPhone 3GS/iPod (1200 mAh): 1.5 hours (3.2 times)

HTC WILDFIRE: 1.6 hours (3 times)

WEIGHT: 3.52 oz. (148 grams)

DIMENSIONS: 1.77 in x 3.74 in x .90 in

(45 mm x 95 mm x 23 mm)

NOTE: Storage of more than 6 months without use may have detri-

mental effects on the condition of the lithium ion battery. It is

recommended that you discharge and recharge fully every 3-4

months to maintain optimal battery life.

Rechargeable Hand Warmer

Mobile Device Charger

Multifunction LED Flashlight

No Scent Heat

4 7

7 6

WARNINGS:

Read all instructions and warnings prior to using this product.

Improper use of this product may result in product damage, ex-

cess heat, toxic fumes, ﬁre or explosion, for which damages you

(“Purchaser”), and not Smart Team or Celestron (collectively

“Manufacturer”) are responsible.

• Do not store battery in high temperature environment, including

intense sunlight.

• Do not place battery in ﬁre or other excessively hot

environments.

• Be cautious of excessive drops, bumps, abrasions or other

impacts to this battery. If there is any damage to the battery

such as dents, punctures, tears, deformities or corrosion, due

to any cause, discontinue use and contact manufacturer or

dispose of it in an appropriate manner at your local battery

recycling center.

• Do not disassemble this battery or attempt to repair or modify

it in any manner.

• Do not expose this battery to moisture or submerge it in liquid.

Keep battery dry at all times.

• Do not attempt to charge battery using any method, apparatus

or connection other than the device’s USB connector. For

questions or instructions for the various ways to charge

FireCel+, refer to this manual.

• Do not attempt to replace any part of this battery.

• This battery is intended for adult use only. If this battery is

intended by Purchaser to be used by a minor, purchasing

adult agrees to provide detailed instructions and warnings to

any minor prior to use. Failure to do so is sole responsibility

of Purchaser, who agrees to indemnify Manufacturer for any

unintended use/misuse by a minor.

• All batteries have gone through a thorough quality assurance

inspection. If you ﬁnd that your battery is excessively hot, is

emitting odor, is deformed, abrased, cut or is experiencing or

demonstrating an abnormal phenomenon, immediately stop all

battery use and contact Manufacturer.

• For extended storage, ﬁrst charge your battery for at least one

hour.

• Never dispose of batteries in the garbage. Disposal of batteries

in the garbage is unlawful, in the United States, under state and

federal environmental laws and regulations. Always take used

batteries to your local battery-recycling center.

DISCLAIMER:

Manufacturer shall not in any way be liable to you or to any third

party for any damages you or any third party may suffer as a

result of use, intended or unintended, or misuse of this battery.

Manufacturer will not be responsible for any damages you or

any third party may suffer as a result of misuse of this battery

as outlined above. If you are responsible for battery use with an

unintended mobile device and damages result from such use, you

agree to indemnify Manufacturer for any resulting injuries to any

third party or parties.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates uses and

can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced technician for help

CAUTION: To comply with the limits of the Class B digital device,

pursuant to Part 15 of the FCC Rules, this device is

comply with Class B limits. All peripherals must be

shielded and grounded. Operation with non-certiﬁed

peripherals or non-shielded cables may results in

interference to radio or reception.

MODIFICATION: Any changes or modiﬁcations not expressly

approved by the grantee of this device could void the user’s

authority to operate the device.

Torrance, CA 90503

TEL (800) 421-9649 | www.celestron.com

(Products or instructions may change without

notice or obligation.)

Designed and intended for those 14 years of age

and older.

Termékspecifikációk

Márka:	Celestron
Kategória:	power bank
Modell:	Elements FireCel+

Szüksége van segítségre?

Ha segítségre van szüksége Celestron Elements FireCel+, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók power bank Celestron

Celestron ThermoCharge Útmutató

11 Augusztus 2024

Celestron Elements FireCel Mega 6 Útmutató

26 Július 2024

Celestron Elements FireCel+ Útmutató

23 Július 2024

Celestron FireCel+ Útmutató

19 Július 2024

Celestron Elements ThermoTorch 5 Útmutató

17 Július 2024

Celestron Elements ThermoCharge 6 Útmutató

14 Július 2024

Celestron Elements ThermoTorch 10 Útmutató

4 Július 2024

Celestron ThermoCharge 10 Útmutató

1 Július 2024

Útmutatók power bank

Legújabb útmutatók power bank

CyberPower CPBC4400WI Útmutató

31 Március 2025

Cellular Line THUNDER 5000 Útmutató

30 Március 2025

Cellular Line ESSENCE TURBO 20000 Útmutató

30 Március 2025

SBS TEBB5000MAGSTAND Útmutató

28 Március 2025

EcoFlow Rapid Útmutató

27 Március 2025

Hummer H1 Útmutató

27 Március 2025

Hummer H2 Útmutató

27 Március 2025

Hummer H3 Útmutató

27 Március 2025

ACOPower HY-PWM-PX20A Útmutató

15 Január 2025

ACOPower HY-MY40 Útmutató

15 Január 2025