Használati útmutató Cecotec Bolero Aguazero 6500 FULL-BI C

Cecotec mosogatógép Bolero Aguazero 6500 FULL-BI C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cecotec Bolero Aguazero 6500 FULL-BI C (12 oldal) a mosogatógép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
1
VSW2VGAA • User Guide
The Extron VSW2VGAA is a compact and economical two-input, one-output VGA
switcher with unbalanced stereo audio and 300 MHz (-3 dB) video bandwidth. It
accepts two VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or
HDTV component video inputs. The switcher has two unbalanced stereo audio
inputs and one unbalanced stereo audio output. It also features a buffered local
monitor output for Input 1. A front panel toggle switch, a contact closure controller,
or the autoswitching option can be used for input selection.
This guide contains information about the Extron VSW2VGAA switcher. The
terms “VSW2VGAA” and “switcher” are used interchangeably in this manual.
The Extron VSWIAAP interface, an optional accessory used when several
VSW2VGAA switchers are daisy chained together, is also discussed.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the
FCC rules. The ClassA limits provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.
NOTES:
• This unit was tested with shielded ables on the peripheral devices. Shielded cables must be used to ensure I/O c
compliance with FCC emissions limits.
• For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related
topics, see the on the Extron website.
Extron Safety and Regulatory Compliance Guide
Specifications
Product specifications are available on the Extron website, www.extron.com.
Application Diagram
Up to 10 VSW2VGAA switchers can be daisy chained
together with each switcher input separately fed and
controlled by an optional accessory interface, the VSWIAAP.
Figure 1 is an example of how several such switcher-interface
combinations can be daisy chained together in a boardroom
environment.
By default, all switchers are set to input 2 as the active input.
Therefore, in a daisy chain of switchers the VGA and audio
signals ow from one switcher to input 2 of the next switcher
in the chain. The switchers are daisy chained in this fashion
until the last switcher in the daisy chain outputs to a projector
and audio amplier.
Up to ten switchers can be daisy chained together without
any degradation in picture quality. One power supply powers
up to ve switchers.
COMPUTER
SH MEOWAUDIO
VSW I AAP
In 1
In 2
Extron pre-made VGA with audio cable assemblies.
Expandable, economical presentation chain rfo
conference rooms and library study omro s.
Out In 2
VSW I AAP
VSW 2VGA A
Extron
VSW 2VGA A
VGA Switcher
In 1
Out In 2
VSW 2VGA A
In 1
Out
VSW 2VGA A
VSW I AAP VSW I AAP
Ext nro
VSW I AAP Projector
Projector
Extron
VSW I AAP
Figure 1. Daisy Chaining the Multiple Switchers
2
VSW2VGAA • User Guide (Continued)
Features
• Inputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks
• Outputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks
• 300 MHz (-3 dB) RGB video bandwidth
• Compatible with VGA-QXGA and HDTV component video signals
• Buffered loop-through for input one
• ID bits from inputs 1 and 2 are routed to the output
• Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.
• Contact closure remote control
• Front panel toggle switch for input selection
• Through-desk, under-desk, and projector-mountable
• 1U, quarter rack width metal enclosure
• External Extron Everlast power supply included — Provides worldwide power compatibility with high-demonstrated
reliability and low power consumption
• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty
Installation Overview
To install and set up the VSW2VGAA for operation, follow these steps:
1. Turn all of the equipment off. Make sure that the video and audio sources (computers, stereos, DVD players, or other
devices), the VSW2VGAA, the output devices (projectors, speakers), and the contact closure control device are all turned off
and disconnected from the power source.
2. If you are going to daisy chain two or more switchers with VSWIAAP control panels, identify the revision of the VSW2VGAA
board (for conguring the VSWIAAPs) and congure the switcher jumpers (see on
Setting the VSW2VGAA Jumpers
page4).
3. If desired, mount the switcher (see on page9).Mounting the VSW2VGAA
4. Attach the cables (see Front Panel Features below and on the next page).Rear Panel Features
5. Connect power cords and turn on the devices in the following order: output devices, contact closure controller, VSW2VGAA
switcher, and input devices.
6. Select an input using the front panel input toggle switch or the contact closure controller.
7. The image should now display, and sound should be audible. If not, ensure that all devices are plugged in and receiving
power. Check the cabling and make adjustments as needed. Select a different input to check for a picture and sound.
Front Panel Features
VSW 2VGA A
INPUT 1
2
1
INPUT 2
C
B
A
D E F G
Figure 2. VSW2VGAA Front Panel Features
A — This LED lights green whenever Input 1 (video and audio) is selected.Input 1 LED indicator
B — This LED lights green whenever Input 2 (video and audio) is selected.Input 2 LED indicator
NOTE: The LEDs also serve as power up indicators. When the switcher is powered up, the selected input LED lights.
C — Toggle this switch up to select Input 1. Toggle it down to select Input 2.Input select toggle switch
D — Input VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or HDTV component video through Input 1 video
this female 15-pin VGA connector.
3
VSW2VGAA • User Guide (Continued)
E (see on the previous page) — Input unbalanced stereo audio through this 3.5 mm mini audio jack (see Input 1 audio figure2
figure3).
Slee ( )ve
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Audio Input Connector
F — Input VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or HDTV component video through Input 2 video
this female 15-pin VGA connector.
G — Input unbalanced stereo audio through this 3.5 mm mini audio jack (see figure3).Input 2 audio
Rear Panel Features
POWER
12V
.1A MAX
VSW 2VGA A
AUTO-SW
CONTACT
OUTPUT
VGA IN 1 LOOP
1 2
AUD OUT
A B C D E
Figure 4. VSW2VGAA Rear Panel Features
A — Connect the included 12 VDC external power supply to the 2-pole 3.5 mm captive screw connector.Power connector
NOTE: One power supply can power up to five switchers (see on page5).
Power Connnection
B — Female 15-pin HD VGA connector for buffered local monitor output from Input 1Loop Thru Input 1 connector
C — Female 15-pin HD VGA connector for output from Input 1 or Input 2. The output video type follows input type and Output
is either VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or HDTV component video.
D — Unbalanced stereo audio is output from this 3.5 mm mini audio jack (see figure5).Audio Output connector
Slee ( )ve
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 5. Audio output connector
NOTE If you are daisy chaining, connect the other end of the audio cable to the Audio input 2 connector on the
downstream video switcher.
E —Contact closure/Autoswitching (Contact/Auto-SW)
• Contact closure — Connect a contact closure device to this 3.5 mm, 3-pole captive screw connector.
• Pin 1 selects Input 1 when momentarily connected to ground (pin 3).
• Pin 2 selects Input 2 when momentarily connected to ground (pin 3).
• Ground connects to the ground wire (equipment ground).
NOTE: Simultaneously connecting both pins 1 and 2 to ground (pin 3) turns autoswitching mode on.
AUTO-SW
CONTACT
1 2

Termékspecifikációk

Márka: Cecotec
Kategória: mosogatógép
Modell: Bolero Aguazero 6500 FULL-BI C

Szüksége van segítségre?

Ha segítségre van szüksége Cecotec Bolero Aguazero 6500 FULL-BI C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mosogatógép Cecotec

Cecotec

Cecotec Bolero Aguazero 6100 E Útmutató

26 Szeptember 2024
Cecotec

Cecotec Bolero Aguazero 6500 FULL-BI C Útmutató

12 Szeptember 2024
Cecotec

Cecotec Bolero Aguazero 6400 Útmutató

28 Július 2024

Útmutatók mosogatógép

Legújabb útmutatók mosogatógép

Miele

Miele G 4485 Útmutató

10 Április 2025
Miele

Miele G 4940 SC Front Jubilee Útmutató

10 Április 2025
AEG

AEG Favorit R 3Prog Útmutató

9 Április 2025
Miele

Miele G 5432 SCU Útmutató

9 Április 2025
Miele

Miele G 5495 SCVi XXL Active Plus Útmutató

9 Április 2025
Oranier

Oranier GAVI 7592 XL Útmutató

9 Április 2025
Amica

Amica DIM44D6EBq Útmutató

9 Április 2025
Sharp

Sharp QW-I1GI47EX Útmutató

9 Április 2025
Beko

Beko BDFN26450XC Útmutató

8 Április 2025
Asko

Asko DFI544B Útmutató

8 Április 2025