Használati útmutató Cavalry CAXM

Cavalry külső merevlemez CAXM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cavalry CAXM (5 oldal) a külső merevlemez kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
Note:
To reduce static discharge, do not
assemble while on a carpeted
surface.
Handle hard drives on the sides
only. Do not touch any pins or
connectors.
Assembly Guide Thank you for purchasing the CAXH user-congured enclosure!
The CAXH enclosure is elegant, cost-effective, and primarily
designed to protect your Hard Disk from shock. The sleek ABS
plastic enclosure tightly conforms to the shape of your Hard Disk
in order to divert the shock of accidental collisions and direct it
towards the enclosure itself; safely away from the delicate Hard
Disk. This requires a careful assembly process in order to pro-
vide maximum protection to your data. Please read the entire
guide before beginning the assembly!
EN-CAXH-B
Enclosure
EN-CAXH-B
1
Remove the box contents. Put the two panels off to the side. The
panel with the circuit board will be refered to as Panel A. The lid
will be referred to as Panel B. Take this moment to count all of the
channels on Panel A. Notice that half of them face inwards. Now
count the tabs on Panel B. These are the main mechanisms that hold
your CAXH together. They must be aligned precisely!
You will need (not included):
Screwdriver with Philips head
1 SATA hard drive
Channels
Channels
EN-CAXH-B
2
ENCLOSURETHE EN-CAXH-B ASSEMBLY GUIDE
1STEP ONE
AB
Once you have tested your internal hard drive, then we can prepare
to insert it into the enclosure. Turn your 3.5” SATA Hard Disk
upside down, so that it’s circuit board is facing up. Slide it into
Panel A slowly, at a 45o angle, until the data port mates with the
connector on Panel A.
2STEP TWO
As you place the hard drive into the enclosure, watch the retainer
pins on the right side of panel A. Once they have lined-up with
the screw-holes on the side of your HDD, push the back end of
the drive downwards, into the oor of Panel A. Do this slowly and
rmly, making sure that all of the retainer pins on Panel A line up
with the screw-holes on the HDD.
EN-CAXH-B
3
ENCLOSURETHE EN-CAXH-B ASSEMBLY GUIDE
3STEP THREE
Use your thumbs to push around the edge of the drive until you
feel that the drive is well-mated with Panel A. Then, insert the two
HDD screws into Panel A, and beyond until they meet with the
screw-holes of the HDD. You may have to push the drive inwards,
towards the board on Panel A, in order to line the holes up. Tighten
the screws slowly, but make sure not to indent the plastic.
Finger-tight will do.
4STEP FOUR
Screwhole
Screwhole
Retainer Pins

Termékspecifikációk

Márka: Cavalry
Kategória: külső merevlemez
Modell: CAXM

Szüksége van segítségre?

Ha segítségre van szüksége Cavalry CAXM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók külső merevlemez Cavalry

Cavalry

Cavalry CAXM Útmutató

6 Július 2024

Útmutatók külső merevlemez

Legújabb útmutatók külső merevlemez

Lexar

Lexar SL500M Útmutató

30 Március 2025
Icy Box

Icy Box IB-2817MCL-C31 Útmutató

4 Január 2025
OWC

OWC Mercury Helios 3S Útmutató

3 Január 2025
OWC

OWC Mercury Elite Pro Dual mini Útmutató

3 Január 2025
Toshiba

Toshiba HDTB310FK3AA-D Útmutató

1 Január 2025
Toshiba

Toshiba HDTB305FK3AA-D Útmutató

1 Január 2025
Toshiba

Toshiba HDTB320FK3CA-D Útmutató

1 Január 2025
I-TEC

I-TEC C31MYSAFEU313 Útmutató

1 Január 2025
Medion

Medion P83775 (MD 90167) Útmutató

31 December 2025
Buffalo

Buffalo HDS-PZN1.0U3TV3 Útmutató

31 December 2025