Használati útmutató CaterChef 403120
Olvassa el alább 📖 a magyar nyelvű használati útmutatót CaterChef 403120 (24 oldal) a vágógép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/24
403100-10-20_en-fr-de ma2018 1
TOP 220 TOP 250 TOP 275
INSTALLATION - USE - MAINTENANCE
INSTALLATION - UTILISATION - ENTRETIEN
AUFSTELLUNG - ANWENDUNG - WARTUNG
Modelnr.: *403.100 - *403.110 - *403.120
SLICER PAG. 2
MACHINE A TRANCHER PAG. 8
AUFSCHNITTMASCHINE PAG. 14
Professio n al uppliesS
403100-10-20_en-fr-de ma2018 2
INDEX
Page
1 INFORMATION ON SAFETIES
3
1.1 General precautions
3
1.2 Mechanical safeties
3
1.3 Elettrical safeties
3
2 TECHNICAL FEATURES
4
2.1 Table of weights and measures - noise
4
2.2 Supply conditions and disposal of packings
4
3 INSTALLATION
5
3.1 Setting the machine
5
3.2 Electric connections
5
3.3 Safety measures and training the final user
5
4 USE OF THE EQUIPMENT
5
4.1 Controls
5
4.2 Setting the goods on the slicer saddle
5
5 CLEANING AND MAINTENANCE
6
5.1 Generalities and products for cleaning
6
5.2 Removing the food – saddle
6
5.3 Removing the blade cover
6
5.4 Cleaning the blade, ring and stop slices
6
5.5 Power cord change
6
6 SHARPENING AND LUBRIFICATION
7
6.1 Sharpener
7
6.2 Lubrication
7
6.3 Machine idle for a long time
7
7 ENCLOSURES
Figure
Elettric diagram
20 21 22 23 ---
23
DESIGN AND TECHNICAL DETAILS CAN BE CHANGED ALSO WITHOUT NOTICE.
403100-10-20_en-fr-de ma2018 3
1) INFORMATION ON SAFETIES
1.1 GENERAL PRECAUTIONS
•The slicer must be managed by skilled personnel, familiar with the instructions for use and safety
contained in this manual.
•In the case of rotation of the personnel, vocational training is necessary.
•Even if the machine comes with several safety systems, avoid setting the hands near the blade and
moving parts.
•Before the cleaning and maintenance operations, check to make sure the machine is disconnected from
the mains.
•Periodicaly check cable and electric elements conditions.
•Never use the slicer for cutting freezed food, meat and fish with bones, or for non-food products.
•Whenever the blade diameter is reduced of more than 6 mm., apply to the assistance service for
replacement.
•Never carry out repearing operations personnally, but apply always to skilled personnel.
1.2 MECHANICAL SAFETIES
The slicers we produce and which are described in this manual meet, as far as safeties are concerned, the
prescriptions on the risks of mechanical type issued by E.E.C. as : 2006/42/CEE. for the sanitary regulations
they comply with the rule 1935/2004/CEE.
All securities are obtained with:
•Fixed ring around the blade
•Releasing device for the removal of the saddle
•Different protections on the saddle
1.3 ELECTRICAL SAFETIES
The safeties against electrical risks comply with the rule 2006/95/CEE and regulations cenelec
EN 60335-2-64.
•All our slicers type include a security switch for restarting the machine whenever a fortuitous lack ofTOP
current occurs .
•The motor includes a thermal overload protection.
•All top slicers have all electric parts protected by hand contact.
Due to the perfect insulation of all the electric elements and the remarkable resistance of all the materials
used, our machines can be installed to work inside moist premises.
ATTENTION: do not use water to clean the slicer, only a humid cloth.
WARNING: In conformity with point 1.7.2. "instructions on further risks" contained in the regulation
2006/42/CEE, these protections and safeties strictly comply with these regulations.
We point out however that the above mentioned protections, even if they sensibly reduce both the possibility
and extent of the damage, do not eliminate fully the risk of cutting.
Termékspecifikációk
Márka: | CaterChef |
Kategória: | vágógép |
Modell: | 403120 |
Szüksége van segítségre?
Ha segítségre van szüksége CaterChef 403120, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók vágógép CaterChef
21 Szeptember 2024
19 Szeptember 2024
4 Augusztus 2024
25 Július 2024
9 Július 2024
Útmutatók vágógép
- vágógép Electrolux
- vágógép Gorenje
- vágógép Princess
- vágógép SilverCrest
- vágógép Ozito
- vágógép Bartscher
- vágógép Makita
- vágógép Hyundai
- vágógép Gastronoma
- vágógép Tefal
- vágógép Camry
- vágógép Heinner
- vágógép Sunbeam
- vágógép Ariete
- vágógép Wilfa
- vágógép Gourmetmaxx
- vágógép Esperanza
- vágógép Fagor
- vágógép Unold
- vágógép Cuisinart
- vágógép Clatronic
- vágógép Bomann
- vágógép Sencor
- vágógép Brother
- vágógép Eta
- vágógép Domo
- vágógép Russell Hobbs
- vágógép Black & Decker
- vágógép G3 Ferrari
- vágógép Severin
- vágógép Orbegozo
- vágógép Concept
- vágógép DEDRA
- vágógép Powerfix
- vágógép Zelmer
- vágógép Hobart
- vágógép Trisa
- vágógép Kogan
- vágógép ProfiCook
- vágógép Saturn
- vágógép Weston
- vágógép Melissa
- vágógép Efbe-Schott
- vágógép Korona
- vágógép Ritter
- vágógép Hendi
- vágógép BEEM
- vágógép Kalorik
- vágógép Gastroback
- vágógép Philco
- vágógép Brandson
- vágógép Rotel
- vágógép Ernesto
- vágógép Thane
- vágógép Trebs
- vágógép Graef
- vágógép Mach
- vágógép Genius
- vágógép Magic Chef
- vágógép Nutrichef
- vágógép Ade
- vágógép Skil
- vágógép Swan
- vágógép Fritel
- vágógép Dremel
- vágógép Perel
- vágógép Presto
- vágógép Sammic
- vágógép Primo
- vágógép Ices
- vágógép RGV
- vágógép Team
- vágógép Magimix
- vágógép OXO
- vágógép Cigweld
- vágógép Nesco
- vágógép Waves
- vágógép Coline
- vágógép JAC
- vágógép De Buyer
- vágógép Maruyama
- vágógép RIDGID
- vágógép Emga
- vágógép Baker's Mark
- vágógép Avantco
- vágógép Wolfcraft
- vágógép PowerTec Kitchen
- vágógép Khind
- vágógép Berkel
- vágógép Bifinet
- vágógép Kleva
- vágógép Bron-Coucke
- vágógép Backyard Pro Butcher Series
- vágógép Boska
- vágógép Royal Catering
- vágógép Tescoma
Legújabb útmutatók vágógép
16 Október 2024
16 Október 2024
15 Október 2024
15 Október 2024
15 Október 2024
10 Október 2024
9 Október 2024
6 Október 2024
5 Október 2024
4 Október 2024