Használati útmutató Byron BY302
Byron
Ajtócsengő
BY302
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Byron BY302 (4 oldal) a Ajtócsengő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/4
™Extra Range
Wire Free Chime Kit
31: Remove the battery cover.
2: Insert 3 X 1.5V Size ‘C’
batteries (Not Supplied).
3: Make sure the
Positive/Negative terminals
match the internal markings.
4: Chime will ‘Beep’ on Start up.
5: Replace the battery cover.
1: Place a small flat screwdriver
into the locking clip on the
base of the Bell Push.
2: Gently twist.
3: The backing plate will unclip.
1
BY302
6:
7:
5:
:8
1: Push Button 5: Portable Chime
2: Melody Selector 6: Speaker
3: Bell Push Battery 7: Volume Control
4: Signal Sent LED 8: Chime Batteries
1:
2:
4:
:3
Functions:
8 Selectable Melodies
1: Tubular 3-Note 5: Tubular Score
2: Big Ben 6: Clarinet
3: Tubular 2-Note 7: Saxophone
4: Solo 8: Morning Dew
4
Beep
Beep
1: Press and hold the ‘VOL’
button on the Door Chime,
until the Chime goes
‘Beep Beep’ (6 Seconds).
2: Press the Bell Push within
60 seconds to learn the
Bell Push to the chime.
3: The Chime will ring to
confirm setup.
Note: Maximum of 6 Bell
Pushes can be learnt to a
single Chime.
4
To select the Chime Volume level, press the ‘VOL’
button on the chime There are 4 selectable volume
levels, the Door Chime is pre-set to the loudest
volume setting.
Volume
Default
To select a melody for the Door Chime
1: Remove the Back Plate from the Bell
Push.
2: Press the Melody Select button.
3:The chime will play the newly selected
sound.
4: Press again to select the next melody.
Note: For Front/Back door setup, select a
different melody in one of the Bell Pushes.
CR2032
New Chime
Additional Chime
To add an additional Chime unit to the Door Chime kit
1: Press and hold the ‘VOL’ button on your New Door Chime, until the
Chime goes ‘Beep Beep’ (6 Seconds)
2: Press the Bell Push within 60 seconds to learn the additional
Chime to the Bell Push.
3: Chime will ring to confirm setup, wait 60 seconds for the Chime to
exit the learn mode before repressing the bell push.
Additional Bell Push
To add an additional Bell Push to the Door
Chime kit.
1: Press and hold the ‘VOL’ button on your
Door Chime, until the Chime goes
‘Beep Beep’ (6 Seconds).
2: Press the Bell Push within 60 seconds
to learn the additional Bell Push to the
Chime.
3: Chime will ring to confirm setup, wait 60 seconds for the Chime
to exit the learn mode before repressing the bell push.
For Front/back door setup, select a different melody in one of
the Bell Pushes - .See Melody Selection
Note: Maximum of 6 Bell Pushes can be learnt to a single Chime
Adding Additional Chime/Bell Push:
Beep
Beep
Front Door
Back Door
1: Insert CR2032 battery
(Supplied) into the battery
holder.
2: Make sure the positive side
is facing upwards.
3: Replace back plate.
2
Warning: Make sure that the batteries are
replaced correctly to avoid battery failure.
Only replace with same or equivalent type.
Installation Guide:
Portable Door Chime: BY302
Power: 3 x ‘C’/LR14 1.5V Batteries
(Not supplied)
Range: 200 Metres
Indoor Use Only
Bell Push: BYT
Power: 1 x CR2032 3V DC Battery
(Included)
IP44 Weather Resistant
Type R2 Device - device where the sound output is created by the initial operation
of the control and where the period of sound output continues for the
designed duration irrespective of condition of the control.
IMPORTANT: There are no serviceable parts, do not repair.
Specification
Range Guide
433.92MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
Project Manager
Mr G Hunter
GB: CH Byron
Byron House, Sherwood Rd
Astonfields, Bromsgrove
B60 3DR
UK
support@chbyron.com
9-5 Mon-Fri, Local call charges apply
V1.0
Tel: 0845 2301231 (UK)
www.chbyron.com
Avoid locating the Bell Push/Chime on or directly
near metallic surfaces as this may reduce the
operation range.
UPVC Door Frames:
When locating the bell push onto a UPVC door,
always check the operating performance before final
installation, internal metal frame may affect
performance.
Tip: Try adjusting the location of the Bell Push to the Left/Right
or place on external wall.
Installation Guide: Bell Push
Installation Guide: Chime
Place the door Chime within the operating range,
transmission of the wire free signal through
Walls, Doors and Ceilings etc, may reduce the operating
range. Chime unit for INDOOR use only.
Diagram for illustration purposes only
433.92MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
Project Manager
Mr G Hunter
V1.0
Bell Push: BYT
Power: 1 x CR2032 3V DC Battery
(Included)
IP44 Weather Resistant
1
2
‘CLICK’
1: Using back plate as a
template.
2: Making sure UP arrows
points UP.
2: Mark and drill holes.
3: Insert wall plugs and attach
to wall using screws
provided.
4: Clip the Bell Push on to the
back plate making sure the
Bell Push ‘Clicks’ in to
place.
Tip: The Bell Push can be
installed using a suitable
double sided adhesive tab or
tape when drilling is not
sutiable.
3Type R2 Device - device where the sound output is created by the initial operation
of the control and where the period of sound output continues for the
designed duration irrespective of condition of the control.
IMPORTANT: There are no serviceable parts, do not repair.
User Hints:
In case of the door chime does not sound, please check the
followings:
a) Flat batteries in either Push Button or Door Chime.
b) Wrong battery polarity in either Push Button or Door Chime.
c) For Plug-in Door Chimes make sure the socket is switched on.
d) Bell Push and Door Chime are not paired together, see setup
guide.
e) Materials in between the Bell Push & Chime will reduce the
operating range, move the Door Chime closer to the Bell Push
f) Wire free devices can be affected by external sources e.g. wire
free home alarms or power transformers/adapter
Specification
Resetting Chime:
Reset Chime unit to factory settings.
1: Press and hold the ‘VOL’ button on your Door Chime,
until the Chime goes ‘Beep Beep’ (6 Seconds)
2: Release the ‘VOL’ button
3: Re-press and hold the ‘VOL’ button on your Door Chime,
until the Chime goes ‘Beep’ (6 Seconds)
4: The Chime is now reset.
Vol
Beep
Vol
Beep
Beep
Chime Unit
1: Remove Batteries.
2: Insert new batteries, 3 X 1.5V
size ‘C’.
3: Make sure Positive/Negative
match the internal markings.
4: Chime will ‘Beep’ on start up.
5: Test Chime Kit.
Changing Batteries:
Bell Push:
1: Remove back plate from the
Bell Push.
2: Remove old battery from the
holder.
3: Replace with new ‘CR2032’ 3V
battery.
4: Insert into holder making sure
‘+’ is facing up.
5: Test Chime Kit.
Always dispose of old batteries in an
environmentally friendly way.
Termékspecifikációk
| Márka: | Byron |
| Kategória: | Ajtócsengő |
| Modell: | BY302 |
Szüksége van segítségre?
Ha segítségre van szüksége Byron BY302, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Ajtócsengő Byron
8 Október 2024
5 Október 2024
5 Október 2024
4 Október 2024
1 Október 2024
30 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
24 Szeptember 2024
23 Szeptember 2024
Útmutatók Ajtócsengő
- Ajtócsengő Nedis
- Ajtócsengő Grundig
- Ajtócsengő Philips
- Ajtócsengő Reolink
- Ajtócsengő SilverCrest
- Ajtócsengő Panasonic
- Ajtócsengő HQ
- Ajtócsengő Emos
- Ajtócsengő Geemarc
- Ajtócsengő Vimar
- Ajtócsengő EZVIZ
- Ajtócsengő Infiniton
- Ajtócsengő ORNO
- Ajtócsengő Fagor
- Ajtócsengő Hikvision
- Ajtócsengő Hama
- Ajtócsengő Hauck
- Ajtócsengő Renkforce
- Ajtócsengő Sencor
- Ajtócsengő CATA
- Ajtócsengő Avidsen
- Ajtócsengő Mercury
- Ajtócsengő Ring
- Ajtócsengő V-TAC
- Ajtócsengő Doro
- Ajtócsengő Smart
- Ajtócsengő TOA
- Ajtócsengő Denver
- Ajtócsengő DiO
- Ajtócsengő Orbegozo
- Ajtócsengő Balay
- Ajtócsengő Nexa
- Ajtócsengő Eufy
- Ajtócsengő REV
- Ajtócsengő Lorex
- Ajtócsengő Foscam
- Ajtócsengő Intertechno
- Ajtócsengő Kogan
- Ajtócsengő Alecto
- Ajtócsengő Honeywell
- Ajtócsengő Imou
- Ajtócsengő Velleman
- Ajtócsengő Aspes
- Ajtócsengő EQ-3
- Ajtócsengő Oricom
- Ajtócsengő Chacon
- Ajtócsengő Elro
- Ajtócsengő Delta
- Ajtócsengő Olympia
- Ajtócsengő Tronic
- Ajtócsengő Arlo
- Ajtócsengő Trust
- Ajtócsengő Konig
- Ajtócsengő GlobalTronics
- Ajtócsengő Fanvil
- Ajtócsengő M-e
- Ajtócsengő Arendo
- Ajtócsengő Somfy
- Ajtócsengő Axis
- Ajtócsengő Brilliant
- Ajtócsengő Melinera
- Ajtócsengő Swann
- Ajtócsengő ACTi
- Ajtócsengő Smartwares
- Ajtócsengő Belkin
- Ajtócsengő Kruidvat
- Ajtócsengő Caliber
- Ajtócsengő Exibel
- Ajtócsengő KlikaanKlikuit
- Ajtócsengő Elektrobock
- Ajtócsengő Techly
- Ajtócsengő Swissvoice
- Ajtócsengő Profile
- Ajtócsengő Marquant
- Ajtócsengő Jacob Jensen
- Ajtócsengő Steren
- Ajtócsengő Perel
- Ajtócsengő ME
- Ajtócsengő Envivo
- Ajtócsengő Milectric
- Ajtócsengő GeoVision
- Ajtócsengő Nest
- Ajtócsengő Grothe
- Ajtócsengő Netatmo
- Ajtócsengő Ubiquiti
- Ajtócsengő Hombli
- Ajtócsengő Plieger
- Ajtócsengő Extel
- Ajtócsengő ACE
- Ajtócsengő DoorBird
- Ajtócsengő Gira
- Ajtócsengő Lifetec
- Ajtócsengő Urmet
- Ajtócsengő EQ3
- Ajtócsengő Friedland
- Ajtócsengő Eken
- Ajtócsengő X-Sense
- Ajtócsengő Doorsafe
- Ajtócsengő Beafon
- Ajtócsengő Bitron Video
- Ajtócsengő Zmodo
- Ajtócsengő Sinji
- Ajtócsengő LSC SmartConnect (Action)
- Ajtócsengő Bell4U
- Ajtócsengő Heidemann
- Ajtócsengő Unitec
- Ajtócsengő Baseline
- Ajtócsengő Legrand
- Ajtócsengő EKO
- Ajtócsengő Intersteel
- Ajtócsengő Merlin
- Ajtócsengő Pentatech
- Ajtócsengő SecuFirst
- Ajtócsengő Ebench
- Ajtócsengő Desa
- Ajtócsengő ZAMEL
- Ajtócsengő Bellman
- Ajtócsengő Mr Safe
- Ajtócsengő AVANTEK
- Ajtócsengő SkyBell
- Ajtócsengő ALC
- Ajtócsengő NuTone
- Ajtócsengő Middle Atlantic
- Ajtócsengő Bearware
- Ajtócsengő Vibell
Legújabb útmutatók Ajtócsengő
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
16 Január 2025
10 Január 2025
8 Január 2025
2 Január 2025
31 December 2025
31 December 2025