Használati útmutató Bowers Wilkins MM-1

Bowers Wilkins MM-1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bowers Wilkins MM-1 (6 oldal) a kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
English
M M -1
2
www.bowers-wilkins.com
Welcome to Bowers and Wilkins and the MM-1
Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did
so in the belief that imaginative design, innovative engineering and advanced technology were keys
that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it
inspires every product we design.
The MM-1 is a very high performance active desktop speaker system that borrows numerous
design techniques from our World renowned hi-fi and studio monitor speakers. As well as listening to
audio stored or streamed on your computer via USB you can:
Connect and listen to an analogue audio source.•
Plug-in and listen to headphones powered by the MM-1 internal amplifier.•
Control the MM-1 using its remote handset.•
Use the MM-1 remote handset to control computer audio applications.* •
* With appropriately capable audio applications.
This manual will tell you everything you need to know to get the most from your MM-1. It begins by
describing the contents of the MM-1 carton.
3
www.bowers-wilkins.com
2. Connecting To Your MM-11. MM-1 Carton Contents
MM-1 connection sockets are found on the back
and the underside of the powered speaker. Those on
the underside are the power input socket, the USB
socket and the slave speaker socket. Those on the
side are the line input socket and the headphone
output socket. The connection sockets are illustrated
above.
Connecting the Slave Speaker
The slave speaker incorporates a captive cable that
connects to the slave speaker connection socket
on the underside of the powered speaker. The plug
on the end of the captive cable is a push t into the
slave speaker socket. The slave speaker incorporates
a facility in its base to coil any spare cable. See
illustration above right for coiling spare cable.
USB Connections
If you wish to listen to audio either stored or streamed
on your PC/Mac, connect from a spare USB socket on
the computer to the USB socket on the underside of
the powered speaker. Use the USB cable supplied.
Note: If an alternative USB cable is used it should
be no longer than 3m (10 ft).
MM-1 Powered Speaker•
MM-1 Slave Speaker•
Power Supply•
Power Cable•
USB Cable•
Stereo Mini-jack cable•
Remote Control Handset•
Document pack containing a Quick Start Guide, •
warranty information and statutory safety warnings.
Environmental Information
All Bowers & Wilkins products are
designed to comply with international
directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical
and Electronic Equipment (WEEE). These symbols
indicate compliance and that the products must be
appropriately recycled or processed in accordance
with these directives. Consult your local waste disposal
authority for guidance.
Aux Input
If you wish to listen to an external analogue audio
source, TV audio or your PC/Mac analogue audio
output for example, connect it to the MM-1 aux in
socket on the back of the powered speaker using the
3.5mm mini-jack cable supplied.
The MM-1 aux in socket and USB input operate in
parallel so that audio signals present on either will
be heard simultaneously. This allows, for example,
computer alert sounds to be heard through MM-1
even while audio is either playing from an alternative
analogue source.
Connecting the Power Supply
Connect the MM-1 Power Supply to a mains outlet
socket using the supplied mains cable. Now connect
the Power Supply output cable to the MM-1 power
input socket. When rst connected to mains power the
MM-1 will automatically enter standby mode with its
indicator illuminating red.
Note: The table on page 5 describes all the MM-1
indicator colours and their meanings.
Headphones
A stereo mini-jack headphone socket is tted to the
back of the powered speaker. Insertion of a headphone
plug will mute the MM-1 speakers.
SLAVE SPEAKER
R
1
1
1
1
1

Termékspecifikációk

Márka: Bowers Wilkins
Kategória:
Modell: MM-1

Szüksége van segítségre?

Ha segítségre van szüksége Bowers Wilkins MM-1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Bowers Wilkins

Bowers Wilkins

Bowers Wilkins Zeppelin Mini Útmutató

20 Augusztus 2024
Bowers Wilkins

Bowers Wilkins Formation Audio Útmutató

2 Augusztus 2024
Bowers Wilkins

Bowers Wilkins MM-1 Útmutató

15 Július 2024

Útmutatók

Legújabb útmutatók

PCE Instruments

PCE Instruments PCE-889B Útmutató

16 Október 2024
PCE Instruments

PCE Instruments PCE-WSAC 50 Útmutató

16 Október 2024
PCE Instruments

PCE Instruments PCE-777N Útmutató

16 Október 2024
Jawbone

Jawbone Jambox Útmutató

15 Október 2024
Jawbone

Jawbone Up2 Útmutató

15 Október 2024
Kundo XT

Kundo XT CO2 Control Útmutató

5 Október 2024
Univers By FTE

Univers By FTE U5000 Útmutató

5 Október 2024
Master

Master CD 5000 Útmutató

21 Szeptember 2024
InterBar

InterBar 8115-004.01 Útmutató

17 Szeptember 2024
Fresh 'n Rebel

Fresh 'n Rebel Rockbox Fold 2013 - 1RB700 Luidspreker Útmutató

14 Szeptember 2024