Használati útmutató Bowers & Wilkins 707 S2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bowers & Wilkins 707 S2 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
6
ENGLISH
Speaker Positioning
Adjustment of speaker position following initial installation
will probably further improve the sound quality and is usually
worthwhile.
In either stereo or home theatre installations, try to ensure that the
immediate surroundings of each speaker are similar in acoustic
character. For example, if one speaker is adjacent to bare walls
while the other is adjacent to soft furnishings and curtains, both
the overall sound quality and the stereo image are likely to be
compromised.
Conventional Stereo Systems
To begin with, the speakers should be positioned between 1.5m
and 3m apart at two corners of an equilateral triangle completed
by the listening area at the third corner. The speakers should be
approximately 0.5m away from the back wall, and at least 0.5m
away from any side walls (above).
Home Theatre Systems
If the speakers are to be used for the front channels in a home
theatre system, they should be placed closer together than for
2-channel audio, because the surround channels tend to widen
the image. Positioning the speakers within approximately 0.5m
of the sides of the screen will also help keep the sound image
in scale with the visual image. As with conventional stereo
positioning, the speakers should ideally be at least 0.5m away
from any side walls. If you would prefer to place your speaker
against the back wall and this location results in over emphasised
bass, see the Fine Tuning section of this manual for information
on using the foam plugs.
Stray magnetic elds
The speaker drive units create stray magnetic elds that extend
beyond the boundaries of the cabinet. We recommend you keep
magnetically sensitive articles (CRT television and computer
screens, computer discs, audio and video tapes, swipe cards and
the like) at least 0.5m from the speaker. LCD, OLED and plasma
screens are not affected by magnetic elds.
2. Positioning
>0.5m >0.5m
>0.5m
110° - 130°
~40°
5 Channels 7 Channels
1.5m - 3m
7
ENGLISH
Ensure that the positive terminals on the speaker (marked + and
coloured red) are connected to the positive output terminal on the
amplier and the negative terminals on the speaker (marked – and
coloured black) are connected to the negative output terminal on
the amplier. Incorrect connection can result in poor imaging and
loss of bass.
Ask your dealer for advice when selecting speaker cable.
All connections should be made with the audio equipment
switched off.
There are 2 linked pairs of terminals on the back of the speaker.
For conventional connection (above left), the terminal links
should remain in place (as delivered) and just one pair of
terminals connected to the amplier. For bi-wire connections
or bi-amplication (above right), the terminal links should be
removed and each pair of terminals connected to the amplier
or ampliers independently. Bi-wiring can improve the resolution
of low-level detail.
3. Connections

Termékspecifikációk

Márka: Bowers & Wilkins
Kategória: hangszóró
Modell: 707 S2

Szüksége van segítségre?

Ha segítségre van szüksége Bowers & Wilkins 707 S2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hangszóró Bowers & Wilkins

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Celly

Celly Ultraboost Útmutató

1 Április 2025
Muse

Muse MC-50 WI Útmutató

1 Április 2025
QSC

QSC MD-FP152-124r Útmutató

30 Március 2025
QSC

QSC PL-CA6 Útmutató

30 Március 2025
QSC

QSC PL-SUB15 Útmutató

30 Március 2025
QSC

QSC PL-SUB10 Útmutató

30 Március 2025
QSC

QSC MD-FP152-64r Útmutató

30 Március 2025
QSC

QSC PL-SUB12 Útmutató

30 Március 2025
Audac

Audac ARCHI210 Útmutató

30 Március 2025
Audac

Audac ARCHI10 Útmutató

30 Március 2025