Használati útmutató BlueParrott Roadwarrior B250-XT

BlueParrott fejhallgató Roadwarrior B250-XT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót BlueParrott Roadwarrior B250-XT (2 oldal) a fejhallgató kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

FCC NOTICE TO USERS

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation. Users are not permitted to make changes or modify the

device in any way. Changes or modications not approved by VXI Corporation will

void the user’s authority to operate the equipment. NOTE: This equipment has been

tested and found to comply with the limits for a Class B digital device pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment on and off, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antennae.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

VXI WARRANTY

1. VXI warrants that your B250-XT headset system will be free from defects

in material and workmanship for one year from the date of purchase. If,

during the rst year from the date of purchase, your B250-XT headset

system fails to work due to a defect in material or workmanship, VXI will

repair or replace the product, at its election, free of charge. Without proof of

purchase, the warranty period begins on the date of manufacture. Consumable

components (for example, cushions, battery and fuse) are not included in this

one-year warranty. You may register your warranty online at www.vxicorp.

com or by calling customer service at 1-800-742-8588.

2. The foregoing limited warranty does not cover equipment failure

attributable to accident, improper operation, misuse, abuse, or any cause other

than defects in the materials or workmanship of VXI’s products.

3. VXI’s obligations under this warranty are limited to repair or replacement

(at our option) of any defective part returned to VXI at the customer’s expense.

Returned products require a Return Authorization that may be obtained

by calling 1-800-742-8588. Products returned to VXI for repair under this

warranty will be return shipped to the customer at VXI’s expense.”

4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Some jurisdictions do not permit the exclusion of

implied warranties and the foregoing exclusions may not apply to you.

5. In no event shall VXI be responsible for any other damages whatsoever,

including direct, indirect, special, incidental, consequential, or other damages

for breach of this or any other warranty, express or implied.

VXI Corporation 271 Locust Street, Dover, NH 03820 USA

1-800-742-8588 / 603-742-2888 / www.blueparrott.com

B250-XT

USER GUIDE

Compatible with Bluetooth phones & Bluetooth enabled

computers (Windows® or Macintosh®)

FUNCTIONS AND INDICATORS AT A GLANCE

Function Button/Duration of press Audio Indicator Visual Indicator Lights

Power on MFB / 2-3 sec. Two rising tones Blue light ashes

Power off MFB / 2-3 sec. Two falling tones All lights go off

Enter pairing mode MFB / 5-15 sec. Two + Four rising tones Red & blue lights ash alternately

Volume up Vol Up / quick press Single tone None

Volume down Vol Dwn / quick press Single tone None

Mute on Vol Up / 2 sec. Single tone None

Mute off Vol Up / 2 sec. Singe tone None

(Short reminder beep every 10 seconds while mute is on)

Voice dial (start) MFB / 1 quick press Single tone None

Voice dial (end) MFB / 1 quick press Single tone None

Last number redial Vol Dwn / 1 sec. Single tone None

Answer a call MFB / quick press Two rising tones Blue light ashes slightly slower

End a call MFB / quick press Two falling tones Blue light ashes slightly faster

Reject a call* MFB / 2 sec. Two falling tones None

*Sends call to Voice Mail (if available)

Transfer audio Vol Dwn / 1-2 sec. Long tone None

(MFB = Multifunction Button)

Range: Up to 66 feet. Best range is achieved with line-of-

sight positioning of headset and cell phone.

Certain conditions and obstructions, such as wireless

devices, placing your phone on a metal surface (such as

your vehicle’s hood), walls, etc., can inhibit radio wave

transmission and reduce range.

Talk Time: 16+ hours on a 12 hour charge.

Standby Time: Up to 150 hours on a 12 hour charge.

Auto (DC) Charger Inline Fuse Replacement:

If neither of the headset charging indicators

light when the auto adapter is connected to the

headset and power source, check the charger’s

inline fuse. Replace with 1A 250V Slow-Blow

glass fuse (3AG) if necessary. Fuses are available

at most automotive stores. To replace, simply

unscrew the tip of the auto adapter (see photo,

right) and remove the fuse (be careful not to lose

the spring that is inside). Put new fuse in and

screw the tip back on.

SPECIFICATIONS

12 ADDITIONAL FUNCTIONS

Note: Your cell phone must support the following functions

(consult the phone owner’s manual).

LAST NUMBER REDIAL

To re-dial the last number that was dialed from the

cell phone, press and hold the volume down button for

approximately 1 second. A beep will be heard and the phone

will redial the last number.

REJECT A CALL

To reject an incoming call, press and hold the MFB for 2

seconds. You will hear 2 falling tones and the incoming call

will be transferred to your voice mail (if available).

More functions on panel 13

13 ADDITIONAL FUNCTIONS

VOICE DIAL

To use the voice dial feature of the cell phone, quickly

press the MFB on the headset; a tone will be heard and

the phone’s voice dialer should open; clearly speak the

command. Repeat quick press of the MFB to end voice

dial. The headset must be in standby mode to use this

feature.

TRANSFER AUDIO

To transfer audio from the headset to the cell phone

while on a call, press and hold the volume down button

for 1-2 seconds. A tone will be heard and audio will

transfer to the phone; repeat to transfer audio back to

the headset. When audio is transferred to the phone, the

red light will ash until audio is transferred back to the

headset.

14 ADDITIONAL FEATURES

TURN HEADSET INDICATOR LIGHTS OFF/ON

A quick press of both the volume up and volume down

buttons at the same time will turn the headset indicator

lights off, repeat to turn the indicator lights on. Headset

must be paired to a phone and in standby mode or on a

call to use this feature. When powering on the headset, the

indicator lights will be in the same state as they were when

last powered off.

AUTOMATIC BLUETOOTH CONNECTION

When the headset is powered on, it will automatically

attempt to connect to the last device it was paired with. If

the headset was paired with multiple devices and the last

connected device is not available (turned off, out of range,

etc.), the headset will attempt to connect to the second to

the last device it was connected to, etc. It is also possible to

reconnect to the device with a quick press of the headset’s

MFB. A tone will be heard and the two devices should

connect.

MULTIPLE DEVICE PAIRING

The B250-XT can pair with up to seven devices at the

same time; however, only one device may be connected to

the headset at a time. To pair the headset with a Bluetooth

cell phone or other Bluetooth device such as a Bluetooth

enabled computer, follow the instructions in panel 6 and

10 of this manual. Remember that all devices except for

the one being paired must either be powered off or at least

50 ft. away during the pairing process.

Once all devices are paired, connection to the last paired

device can be made by turning the headset off and then

on again, or with a quick press of the MFB. The headset

will connect to the devices in opposite order of pairing.

For instance, if device A, B and C were paired in that

order, connection will be established to C rst. If C is

not available (turned off, out of range), the headset will

connect to B, etc.

To reset the headset’s internal paired devices list, press and

hold both the volume up and the volume down buttons for

5-6 seconds.

A double beep with be heard and the list will be reset.

This procedure may be necessary if the headset will not pair

or connect to a device.

NOTE: Pairing information for devices previously paired

with the headset will be lost. Headset will need to be paired

to the device after reset has occurred.

RESET PAIRED DEVICES LIST

Printed in China

CANADA / IC NOTICE TO USER

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

This device complies with RSS-310 of Industry Canada. Operation is subject to the

condition that this device does not cause harmful interference. This Class B digital

apparatus complies with Canadian ICES-003 (Cet appareil numérique de la classe B

est conforme à la norme NMB-003 du Canada).

Turn Headset On: Hold down the MFB for 2-3 seconds

until you hear 2 rising tones. The red light will ash

once every second.

Standby Mode: After the headset is turned on, it will

attempt to connect to the last device that it was paired

with, putting itself into standby mode. The headset can

also be put into standby mode with a quick press and

release of the MFB. The blue light will ash indicating

an active Bluetooth link.

Turn Headset Off (conserves battery power): Hold

down the MFB for 2-3 seconds until you hear 2 falling

tones. A red light will ash 4 times and the headset will

turn off.

Position microphone near corner of your mouth.

Correct positioning ensures that the noise

cancellation technology works properly. Slight

adjustment of the microphone may help to achieve

optimum performance.

HEADSET CONTROLS

Volume Increase: Quickly press and release the Volume

Up/Mute button. Repeat until desired volume is attained.

Volume Decrease: Quickly press and release the Volume

Down button. Repeat until desired volume is attained.

Microphone Mute/Un-Mute: Hold down the Volume Up/

Mute button for 2 seconds until you hear a beep. A mute

reminder beep will be heard every 10 seconds.

Repeat to un-mute.

Multifunction Button (MFB)

& Indicator Lights

Volume Up

& Microphone Mute

Volume Down

After the initial 12 hour charge, the indicator lights will

indicate the level of battery power as follows.

Green light: Fully charged. Up to 16 hours talk time.

Green & red lights together: Approximately 60 seconds

away from full charge.

Red light: Less than a full charge.

TIPS

BATTERY POWER INDICATORS

Select charger cord and

plug it into the charger

port on the headset.

Charge for 12 full hours

before rst use.

Note: If you do not use your

headset for a long period of

time, you should repeat this

12 hour charge.

AC Charger DC Charger

TABLE OF CONTENTS

1 - Safety Instructions / Glossary

2 - Charge the Headset

3 - Battery Power Indicators

4 - Headset Controls

5 - On / Standby / Off

6 - Pair Headset with the Phone

7 - Microphone Positioning

8 - Make a Call / End a Call

9 - Answer a Call / End a Call

10 - Pairing with a Computer

11 - Operation While Using the Charger/Adapter

12 - Last Number Redial

12- Reject a Call

13 - Voice Dial

13 - Transfer Audio

14- Turn Headset Indicator Lights Off/On

14- Automatic Bluetooth Connection

15- Multiple Device Pairing

16- Reset Paired Devices List

17- Specications

Keep charger plugged into headset when not in use to

avoid battery drain. It’s not necessary for the charger to

be plugged into a power source to take advantage of this.

= Avoid hearing damage. Set volume at lowest comfortable level. If

you experience ringing in your ears or people sound mufed, stop using

the headset. Avoid turning up volume to block noisy surroundings (it’s

possible to adapt to volume that is too high).

= Check with local and state laws regarding cell phone handset usage

while operating a motor vehicle.

= Replace only with same or equivalent battery.

= Dispose of batteries according to local regulations.

= Do not throw batteries in a re, as they could explode.

= Do not immerse any part of this product in water.

= Plastic bags and small parts may cause choking if ingested. Keep

them away from small children and pets.

= Use only the power cords included with this product.

= Avoid temperatures exceeding 140°F (will cause equipment failure).

GLOSSARY OF TERMS

Paired - Two Bluetooth devices agree to communicate with one another.

On - Headset is on but there is no connection to the phone (red light will

ash).

Standby Mode - Headset is on, Bluetooth link is active, the user is not

on a call (blue light will ash).

Talk Mode - Headset is being used with the cell phone while the cell

phone is on an active call.

PAIR HEADSET WITH THE PHONE

PAIRING WITH A COMPUTER

MAKE A CALL / END A CALL

OPERATION WHILE

USING THE CHARGER / ADAPTER

SAFETY INSTRUCTIONS/GLOSSARY

5ON / STANDBY / OFF

1. Turn headset off (panel 5).

2. Hold down the headset’s MFB until the red and blue lights

ash and you hear 2 rising tones, followed by 4 more tones.

Important: Wait for all tones and for both lights to ash. This

may take up to 15 sec. Release the MFB.

3. Follow the manufacturer’s instructions for putting your

cellular phone into Bluetooth discovery mode.

4. Wait 5-15 sec. while the devices discover each other. When

the phone discovers the headset, select “Pair” and enter a

passcode of 0000 when instructed. When pairing is complete

the headset’s blue light will stop ashing and the phone will

prompt you to ‘connect’ to the headset. Enter “Yes” on the

phone to connect to the headset. When connected, the blue

light will ash indicating that the headset is in standby

mode ready to receive a call.

Keep headset & phone no less than 3 inches and no more than

3 feet apart while pairing. Keep other Bluetooth devices at

least 50 ft. away or turn them off. Note: The headset can be

paired with up to 3 different devices.

If you have not paired the headset and phone together yet, you

must do so (panel 6).

1. Turn on your cell phone. Be sure the Bluetooth option is

enabled on your phone (refer to your phone’s user guide for

instruction).

2. Put headset on and properly position the microphone

(panel 7). To turn headset on press MFB for 2-3 seconds.

The headset will automatically attempt to connect with the

last device it was paired or connected with. Once connected,

the headset will enter standby mode.

3. Dial the phone and make a call as usual.

4. To end call, quickly press the MFB on the headset and

release. You will hear 2 falling tones; the call will end and

the headset will enter standby mode.

In order to answer a call, the headset must be in

standby mode (panel 5).

1. Put headset on. Position the microphone (panel 7).

2. When your cell phone rings, you will hear ring tones

in the headset. Answer the call by quickly pressing the

headset’s MFB and release.

3. To end the call, quickly press the MFB on the

headset and release. You will hear 2 falling tones; the

call will end and the headset will enter standby mode.

MICROPHONE POSITIONING

ANSWER A CALL / END A CALL

Indicator Lights

CHARGE THE HEADSET

Keep headset & computer no less than 3 inches and no more

than 3 feet apart while pairing. Keep all other Bluetooth

devices at least 50 ft. away or turn them off.

1. Turn headset off (panel 5).

2. Open the computer’s Bluetooth connection manager.

3. Put headset into pairing mode (Panel 6- Step 2).

4. Instruct Bluetooth connection manager application to discover

Bluetooth device. Enter passcode 0000 when prompted.

5. Wait 5-15 seconds while the devices discover each other.

The headset’s blue light will stop ashing and the red light

will continue to ash. After pairing is complete, the Bluetooth

computer will ‘ring’ the headset. Press and release the MFB

once to establish a Bluetooth link to the computer. Press and

release the MFB again to disconnect from the computer.

Once paired, connection can be made by pressing the volume

down button for 1-2 seconds. Tones will be heard and a

connection should be established.

The B250-XT headset will operate from battery power or

from the AC or DC charger/adapter.

Note: Do not attach the charger mid-call. This causes the

headset to turn off (call will not be lost).

When the headset is operating from the battery, all indicator

lights and sounds will function as described in this guide.

When the headset is operating from the charger/adapter,

the headset, including the audio indicators will function as

described in this user guide. However the MFB lights will

indicate the battery charge status (see Panel 3).

After the battery is fully charged, the MFB charge light

will turn and stay green as long as the charger/adapter

is connected to the headset. While the headset is fully

charged and the charge light is green, the blue indicator

light will also be on if the headset is powered on.

For best performance, keep charging headset when not in use.

Failure to charge

less than 12 hours

may result in shorter

talk time.

Termékspecifikációk

Márka:	BlueParrott
Kategória:	fejhallgató
Modell:	Roadwarrior B250-XT

Szüksége van segítségre?

Ha segítségre van szüksége BlueParrott Roadwarrior B250-XT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók fejhallgató BlueParrott

BlueParrott S650-XT Útmutató

30 Augusztus 2024

BlueParrott B650-XT Útmutató

30 Augusztus 2024

BlueParrott M300-XT Útmutató

18 Augusztus 2024

BlueParrott C300-XT Útmutató

18 Augusztus 2024

BlueParrott B250-XT Útmutató

17 Augusztus 2024

BlueParrott C400-XT Útmutató

16 Augusztus 2024

BlueParrott B350-XT Útmutató

14 Augusztus 2024

BlueParrott Roadwarrior B250-XT Útmutató

14 Augusztus 2024

BlueParrott B450-XT Útmutató

14 Augusztus 2024

Útmutatók fejhallgató

Legújabb útmutatók fejhallgató

Avantree HT41899 Plus Útmutató

10 December 2024

Hama Kooky 184140 Útmutató

9 December 2024

Hama Shell 184143 Útmutató

9 December 2024

Interphone U-COM 8R Útmutató

9 December 2024

Interphone U-COM 7R Útmutató

9 December 2024

Interphone U-COM 3 Útmutató

9 December 2024

Sennheiser PC 373D Útmutató

9 December 2024

Sennheiser PC 363D Útmutató

9 December 2024

Sennheiser SC 230 USB MS II Útmutató

9 December 2024

Sennheiser SC 70 USB MS Útmutató

9 December 2024