Használati útmutató Black & Decker MT350

Black & Decker Multi-szerszám MT350

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Black & Decker MT350 (72 oldal) a Multi-szerszám kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/72
MT350
www.blackanddecker.eu
2
C
A B
3
ENGLISH
(Original instructions)
Intended use
Your multi-purpose tool has been BLACK+DECKER MT350
designed for a wide range of DIY applications.
Using the drill/screwdriver head (MTDD6), this tool is intended
for screwdriving applications and for drilling in wood, metal
and plastics.
This tool is intended for consumer use only. Your
BLACK+DECKER charger has been designed for charging
BLACK+DECKER batteries of the type supplied with this tool.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.

Termékspecifikációk

Márka: Black & Decker
Kategória: Multi-szerszám
Modell: MT350

Szüksége van segítségre?

Ha segítségre van szüksége Black & Decker MT350, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Multi-szerszám Black & Decker

Black & Decker

Black & Decker Matrix BDCDMT120IA Útmutató

21 Szeptember 2024
Black & Decker

Black & Decker MT300SA2 Útmutató

26 Július 2024
Black & Decker

Black & Decker BCASH81B Útmutató

14 Július 2024
Black & Decker

Black & Decker MT350 Útmutató

10 Július 2024
Black & Decker

Black & Decker MT250 Útmutató

9 Július 2024

Útmutatók Multi-szerszám

Legújabb útmutatók Multi-szerszám

Powerblade

Powerblade PC4MT5 Útmutató

10 December 2024
EGO

EGO PH1420E Útmutató

9 December 2024
Einhell

Einhell TE-MG 200 E Útmutató

8 December 2024
Parkside

Parkside PAMFW 20-Li A1 Útmutató

15 Október 2024
Güde

Güde GGF 620 Útmutató

14 Október 2024
Worx

Worx WX822L Útmutató

9 Október 2024
Powerfix

Powerfix PMW 2 B1 Útmutató

8 Október 2024
Worx

Worx WX696L.1 Útmutató

4 Október 2024
Ferm

Ferm OTM1001 Útmutató

22 Szeptember 2024
Powerfix

Powerfix IAN 89109 Útmutató

11 Szeptember 2024