Használati útmutató Black & Decker 7558
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Black & Decker 7558 (45 oldal) a Schuurmachine kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/45
VEA EL ESPA OL EN LA CONTRAPORTADA.Ñ
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
Finishing Sander
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
bEfORE YOU CALL, hAVE ThE CATALOG No. AND DATE CODE AVAILAbLE. IN mOST CASES, A
BLACK & DECKER REPRESENTATIVE CAN RESOLVE ThE PRObLEm OVER ThE PhONE.
If YOU hAVE A SUGGESTION OR COmmENT, GIVE US A CALL. YOUR fEEDbACk IS
VITAL TO bLACk & DECkER.
T B & D !hank you for choosing lack ecker
g .B D . /n o o To www lackanD ecker com ew wner
To regisTer your new proDucT .
Catalog Number
7558
2
General Safety Rules
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/ or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
3
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specic Safety Rules
• Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring. Cutting accessory
contacting a “live” wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
• Always hold tool rmly with both hands and only operate when hand held.
• Use clamps or another practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• ANSIZ87.1eyeprotection(CAN/CSAZ94.3),
• ANSIS12.6(S3.19)hearingprotection,
• NIOSH/OSHArespiratoryprotection.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from lead-based paints,
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically-treated lumber (CCA).
Termékspecifikációk
| Márka: | Black & Decker |
| Kategória: | Schuurmachine |
| Modell: | 7558 |
Szüksége van segítségre?
Ha segítségre van szüksége Black & Decker 7558, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Schuurmachine Black & Decker
6 Október 2024
5 Október 2024
4 Október 2024
10 Szeptember 2024
31 Augusztus 2024
13 Augusztus 2024
2 Augusztus 2024
31 Július 2024
30 Július 2024
28 Július 2024
Útmutatók Schuurmachine
- Schuurmachine Milwaukee
- Schuurmachine Parkside
- Schuurmachine Bosch
- Schuurmachine AEG
- Schuurmachine Einhell
- Schuurmachine Ozito
- Schuurmachine Makita
- Schuurmachine Flex
- Schuurmachine Scheppach
- Schuurmachine Ergotools Pattfield
- Schuurmachine Güde
- Schuurmachine Hitachi
- Schuurmachine Proviel
- Schuurmachine Hilti
- Schuurmachine Global
- Schuurmachine Fieldmann
- Schuurmachine PowerPlus
- Schuurmachine DEDRA
- Schuurmachine Metabo
- Schuurmachine Bavaria
- Schuurmachine RYOBI
- Schuurmachine Proxxon
- Schuurmachine HiKOKI
- Schuurmachine Festool
- Schuurmachine McKenzie
- Schuurmachine Trotec
- Schuurmachine Bavaria By Einhell
- Schuurmachine Herkules
- Schuurmachine Porter-Cable
- Schuurmachine DeWalt
- Schuurmachine Stanley
- Schuurmachine Silverline
- Schuurmachine Vonroc
- Schuurmachine Arendo
- Schuurmachine TAURUS Titanium
- Schuurmachine Alpha Tools
- Schuurmachine Fein
- Schuurmachine Craftsman
- Schuurmachine Maestro
- Schuurmachine Hazet
- Schuurmachine Ferm
- Schuurmachine Tryton
- Schuurmachine Skil
- Schuurmachine Meec Tools
- Schuurmachine Dremel
- Schuurmachine Maktec
- Schuurmachine Bort
- Schuurmachine Power Craft
- Schuurmachine Topcraft
- Schuurmachine Gamma
- Schuurmachine Matrix
- Schuurmachine Kress
- Schuurmachine Duro
- Schuurmachine Max
- Schuurmachine Truper
- Schuurmachine Bruder Mannesmann
- Schuurmachine Meister Craft
- Schuurmachine RIDGID
- Schuurmachine Rupes
- Schuurmachine Batavia
- Schuurmachine Westfalia
- Schuurmachine Stomer
- Schuurmachine Elu
- Schuurmachine King Craft
- Schuurmachine Powertec
- Schuurmachine Rikon
- Schuurmachine Duro Pro
- Schuurmachine FIXIT
- Schuurmachine Einhell Bavaria
- Schuurmachine THUN
- Schuurmachine Stalco
Legújabb útmutatók Schuurmachine
14 Október 2024
14 Október 2024
10 Október 2024
8 Október 2024
8 Október 2024
5 Október 2024
5 Október 2024
5 Október 2024
4 Október 2024
4 Október 2024