Használati útmutató Bigben Interactive BB 314298

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bigben Interactive BB 314298 (25 oldal) a vezérlő kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/25
GAMEPHONE CONTROLLER
User’s Manual
BB5023
Thank you for buying the Bigben Interactive controller for smart phones and tablets.
This product has been designed to improve your game experience.
Please keep this instruction manual for future reference. If you require any assistance or
help please contact the Helpline.
Warranty
This product bearing the Bigben Interactive trademark, is guaranteed by the manufacturer
for a period of 1 year from the date of purchase, and will, during this period be replaced with
the same or a similar model, at our option, free of charge, if there is a defect due to faulty
material, or workmanship. This guarantee does not cover defects arising from accidental
damage, misuse or wear and tear, and is available only to the original purchaser of the
product. This does not affect your statutory rights.
Product features
• 4 compatibility modes - IOS, Android*, Keyboard and HID mode
• 6 action buttons
• D-pad and dual analogue stick control
• Bluetooth® connection
• Built in rechargeable battery
• Removable phone holder
*Compatible with Android 3.2 and above.
Product contents
• Gamephone controller
• Phone holder
• USB charging cable
CONTROLLER SET-UP AND USE
Before using the Gamephone controller, please ensure that the internal battery is fully
charged.
01. Connect the supplied USB cable to the micro USB connection on the front of the
controller.
02. Connect the larger USB connection to any compatible USB power source, i.e. a PC
or USB AC adaptor.
03. The charge LED will now light to indicate that it is charging. Allow to charge
for 2 – 3hours
04. When charging is complete, the charge light will switch off. Your controller is now ready
for use.
FITTING THE PHONE HOLDER
Your Gamephone is supplied with a removable phone holder to conveniently hold your phone
during play.
To attach or remove it from the controller, follow these steps.
01. Slide the holder into the slot in the top of the controller. When it
is fully inserted, it will click into place.
02. Slide the lock switch left on the rear of the controller to lock the
holder in place.
03. Loosen the knob on the rear to the holder so you can place your
phone in landscape or portrait orientation.
04. Tighten the knob and fi t your phone into the sprung holder.
05. To remove the holder, fi rstly remove your phone.
06. Push the lock switch right and then pull to the holder out of the
controller.
IMPORTANT
For the fi rst set up, please ensure that you set the controller for your correct country and
keyboard set up.
For AZERTY (French) press buttons 2 and HOME together for 5 seconds for the fi rst power
on.
For QWERTZ (German) press buttons 1 and HOME together for 5 seconds for the fi rst
power on.
For QWERTY (UK, AUS & US) press buttons 4 and HOME together for 5 seconds for the
rst power on.
USING THE CONTROLLER ON IPHONE, IPOD OR IPAD. IOS ICADE MODE.
MODE 1.
01. On your device, go to Settings \ General \ Bluetooth® and set Bluetooth® to ‘ON’

Termékspecifikációk

Márka: Bigben Interactive
Kategória: vezérlő
Modell: BB 314298

Szüksége van segítségre?

Ha segítségre van szüksége Bigben Interactive BB 314298, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók vezérlő Bigben Interactive

Útmutatók vezérlő

Legújabb útmutatók vezérlő