Használati útmutató Big Ben QuickFire Destruction Pad

Big Ben vezérlő QuickFire Destruction Pad

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Big Ben QuickFire Destruction Pad (5 oldal) a vezérlő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/5
PS3™ QUICKFIRE CONTROLLER
User’s Manual
Thank you for purchasing the Quickfi re controller for PS3™ from Bigben Interactive.
This product includes:
• 5 Preset quick fi re modes for all your favourite games.
• Clear LCD screen.
• 8 shots per second up to 48 shots per second.
• Custom fi ring mode – set your own quick fi re rate from 6 shots per second up to a blistering 60 shots per second.
• Program any action buttons for rapid fi re.
• Tilt sensors and vibration.
• Ergonomic, non slip triggers.
• Supplied with 2 AA Alkaline batteries.
Controller Set-Up and Use
Battery Installation
1. Remove the battery compartment cover from underneath the controller
2. Insert 2 x 1.5 volt AA size batteries, observing the correct polarity
3. Refi t the battery compartment cover
Using the Controller with a PS3™.
Slide the switch on the Receiver Unit to PS3™ mode.
Receiver Connection
Plug the Receiver Unit into one of the USB ports on your PS3™ console. The Red LED on the Receiver Unit will fl ash constantly.
Using your Controller
1. Switch on the controller by sliding the power On/Off switch, on the Controller, to on. When the controller has successfully connected with
the Receiver Unit the Red LED, on the receiver, will stop fl ashing and be lit continuously.
2. Press the `PS Home’ button on the centre of the controller. This is the button with the house symbol.
3. The controller will connect to your PlayStation
®3 console and the numbered Red LED’s will light up showing your controller number.
4. Ensure that your contoller is assigned as controller 1.
If it is not recognised as controller 1, press and hold the home button to bring up the option menu, while you have a game loaded.
Select the controller settings and then select the ‘Reassign the Controller’ option.
Scroll down with the d-pad on the rifl e until it says 1 on the TV screen.
Press X to select it and then press O twice to go back to your game.
For further information on assigning controller ports please refer to your console instruction manual.
Quick fi re modes
The Quickfi re controller has 6 different quick fi re modes to suit all of your favourite shooting games. The controller is set to mode 1, 8 shots
per second by default.
The mode is displayed on the LCD screen as M1 08SPS. Quick fi re is set to the R1 button of your controller as this is the most common
fi ring button for shooting games.
L
SEL ECT
ON OFF
ST A RT
PS
R
M5 48 SP S
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 08 SPS
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 10 SPS
PRG
R1
M2
M1
M3
M4
M5
Changing the quick fi re modes
The quick fi re modes have been designed to work on all of your shooting games. To ensure full compatibility please select the correct mode
for your game.
The modes are as follow:
M1 8SPS – Call of Duty 4 Modern Warfare
M2 10SPS – Call of Duty World at War and Call of Duty: Black Ops
M3 20SPS – Call of Duty Modern Warfare 2
M4 32SPS – Call of Duty Modern Warfare 2
M5 48SPS - Call of Duty Modern Warfare 2
Please note that modes M4 and M5 may have varied results depending on which guns you are using in the game. If you experience
any problems, stick with the M3 mode. These modes will also work with other popular shooting games, like Battlefi eld™, Killzone™,
Resistance™ etc. Try the different modes to select which works best.
To change between modes follow these steps.
1. Press start and select simultaneously to enter the programming mode.
2. Press up or down on the D-pad to cycle through the different modes.
3. When you have found your correct mode press start and select again to confi rm your selection.
4. The controller will now fi re at your chosen speed when you press R1.
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 08 SPS
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 06 SPS
PRG
M6
M5
M1
M2
M3
Custom quick fi re mode
The quick fi re controller also includes a custom mode to ensure future compatibility with new games and so you can experiment with
different fi ring rates. The rates can range for 6 shots to 60 shots per second.
To set the custom fi ring rates follow these steps:
1. Press start and select simultaneously to enter the programming mode.
2. Press up or down on the D-pad to cycle through the different modes and choose M6.
3. Then press the select button to enter the shots mode.
4. Press up or down on the D-pad to choose the shots per second you want.
5. Press start and select again to confi rm your selection.
6. The controller will now fi re at your chosen rate when you are in M6 mode.
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 08 SPS
P RG
L
SEL ECT
ON OFF
ST A RT
PS
R
M6 06 SP S
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 06 SPS
PRG
M6
M5
M1
M2
M3
L
SEL ECT
ON OFF
ST A RT
PS
R
M6 14 SP S
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
M6 10 SPS
PRG
R1
14
12
16
--
60
Programming other buttons for rapid fi re
By default, only the R1 button is used for quick fi re, but if you are playing games that use another button for fi ring, you can also program
them.
To set other buttons for quick fi re, follow these steps:
1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will
then display PRG.
2. Press the button you wish to program as quick fi re (i.e. the triangle button) A triangle symbol will then appear on the LCD screen to
indicate it has been pressed.
3. Press select and PS Home again to confi rm your selection. The triangle button will now act in quick fi re mode. The button will remain
as a quick fi re button even when you switch off your controller
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
To set the button back to normal, follow these steps.
1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will
then display PRG.
2. Press the button you wish to clear as quick fi re (i.e. the triangle button) The triangle symbol will then disappear from the LCD screen
to indicate it has been pressed.
3. Press select and PS Home again to confi rm your selection. The triangle button will set back to normal.
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
L
SEL ECT
ON OFF
ST A RT
PS
R
PRG
Disable Quick fi re on R1 button
If you do not want rapid fi re on the R1 button you can disable it in the same way as mentioned above
1. Press the select and PS Home button on the controller simultaneously to enter the button programming mode. The LCD screen will
then display PRG.
2. Press the R1 The R1 symbol will then disappear from the LCD screen to indicate it has been pressed.
3. Press select and PS Home again to confi rm your selection. The R1 button will set back to normal and will no longer have quick fi re.
L
SEL ECT
ON OFF
ST A RT
PS
R
P RG
R1
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 08 SP S
L
SEL ECT S T ART
PS
R
PRG
Clearing all programming
If you wish to set your controller back to default, simply switch it off and switch it back on again, whilst holding the start and select buttons
simultaneously. All controls will then be set to standard factory settings.
L
SEL ECT
ON OFF
ST A RT
PS
R
L
SEL ECT
ON OFF
ST A RT
PS
R
M1 08 SP S
PRG
R1

Termékspecifikációk

Márka: Big Ben
Kategória: vezérlő
Modell: QuickFire Destruction Pad

Szüksége van segítségre?

Ha segítségre van szüksége Big Ben QuickFire Destruction Pad, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vezérlő Big Ben

Big Ben

Big Ben QuickFire Destruction Pad Útmutató

17 Július 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

DJI

DJI Motion Controller Útmutató

14 Január 2025
8BitDo

8BitDo Ultimate C Wired Controller Xbox Útmutató

11 Január 2025
Balam Rush

Balam Rush Kontrol React G575 Útmutató

11 Január 2025
Sonance

Sonance VC30R Útmutató

9 Január 2025
BeamZ

BeamZ WTR10-5 Útmutató

6 Január 2025
Audibax

Audibax MC1000 Útmutató

6 Január 2025
Somfy

Somfy Keypad 2 RTS Útmutató

2 Január 2025
Somfy

Somfy Keypop RTS Útmutató

2 Január 2025
Somfy

Somfy Wall Switch 3 RTS Útmutató

2 Január 2025
Logitech

Logitech Driving Force Shifter Útmutató

1 Január 2025