Használati útmutató BENNING CM 2-1
BENNING
multiméter
CM 2-1
Olvassa el alább 📖 a magyar nyelvű használati útmutatót BENNING CM 2-1 (44 oldal) a multiméter kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/44
BENNING CM 2-1
Operating manual
Translation of the German original version
5191 / 07/2021 en
Legal notice
5191 / 07/2021 enBENNING CM 2-12
Legal notice
Notes concerning the documentation
Ensure that the applicable documentation is used for this product. For safe handling, knowledge
that is provided in these instructions is required.
The product may only be handled while following this documentation, particularly the safety
instructions and warnings it contains. The personnel must be qualified for the respective task
and have the capability to recognise risks and prevent possible dangers.
Manufacturer and holder of rights
BENNING Elektrotechnik und Elektronik GmbH&Co.KG
Münsterstraße135–137
46397 Bocholt
Germany
Phone: +492871/93‑0
E-Mail: duspol@benning.de
Internet: www.benning.de
Commercial register Coesfeld HRA No. 4661
Copyright
© 2021, BENNING Elektrotechnik und Elektronik GmbH&Co.KG
All rights reserved.
This document – particularly all of the contents, texts, photographs and graphics that it contains
– are protected by copyright.
No part of this documentation or the associated contents may be reproduced or edited, copied
or distributed using electronic media in any form (printed, photocopied or using any other
method) without express written permission.
Disclaimer
The contents of the documentation has been checked to ensure that it corresponds to the
hardware and software described. Nevertheless, deviations cannot be ruled out, so Benning
cannot guarantee complete correspondence. The contents of this documentation are checked
at regular intervals, and any corrections that are needed are contained in the versions that
follow.
General non-discrimination
Benning is aware of the importance of language with regard to the equality of men and women,
and endeavours to take this into account at all times. To improve readability, we have refrained
from consistently using differentiating formulations.
Table of contents
Table of contents
1 Introduction................................................................................................................................................7
1.1 General notes........................................................................................................................7
1.2 History ...................................................................................................................................8
1.3 Service & support..................................................................................................................9
2 Safety........................................................................................................................................................10
2.1 Warning system ..................................................................................................................10
2.2 Standards applied ...............................................................................................................10
2.3 Symbols used......................................................................................................................11
2.4 Intended use .......................................................................................................................12
2.5 Special types of risks ..........................................................................................................14
3 Scope of delivery.....................................................................................................................................15
4 Device description...................................................................................................................................17
4.1 Device structure ..................................................................................................................17
4.2 Functions.............................................................................................................................20
4.2.1 “ACHFR/ DCAZERO” key ................................................................................................20
4.2.2 “HOLD / MIN MAX” key.......................................................................................................21
4.2.3 Further setting options ........................................................................................................21
4.3 Measuring ranges ...............................................................................................................22
4.3.1 Voltage ranges ....................................................................................................................23
4.3.2 Current ranges ....................................................................................................................24
4.3.3 Resistance ranges ..............................................................................................................24
4.3.4 Continuity test .....................................................................................................................24
4.3.5 Diode test ............................................................................................................................25
4.3.6 Capacitance ranges ............................................................................................................25
4.3.7 Frequency ranges ...............................................................................................................25
5 Operation..................................................................................................................................................26
5.1 Requirements for tests and measurements ........................................................................26
5.2 Connecting the safety measuring lines ...............................................................................27
5.3 Voltage or frequency measurement ....................................................................................28
5.4 Current or frequency measurement ....................................................................................30
5.5 Resistance measurement ...................................................................................................31
5.6 Continuity testing.................................................................................................................32
5.7 Capacitance measurement .................................................................................................32
5.8 Diode testing .......................................................................................................................33
5.9 Voltage indicator .................................................................................................................33
5.9.1 Non-contact phase testing ..................................................................................................34
5191 / 07/2021 en 3BENNING CM 2-1
Termékspecifikációk
| Márka: | BENNING |
| Kategória: | multiméter |
| Modell: | CM 2-1 |
Szüksége van segítségre?
Ha segítségre van szüksége BENNING CM 2-1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók multiméter BENNING
23 Augusztus 2024
23 Augusztus 2024
23 Augusztus 2024
20 Augusztus 2024
15 Augusztus 2024
8 Augusztus 2024
3 Augusztus 2024
1 Augusztus 2024
30 Július 2024
29 Július 2024
Útmutatók multiméter
- multiméter PeakTech
- multiméter Milwaukee
- multiméter Parkside
- multiméter Maxwell
- multiméter Emos
- multiméter Voltcraft
- multiméter Vimar
- multiméter Digitus
- multiméter GW Instek
- multiméter Owon
- multiméter Aim TTi
- multiméter Gossen Metrawatt
- multiméter Amiko
- multiméter Klein Tools
- multiméter Chauvin Arnoux
- multiméter Workzone
- multiméter Beha-Amprobe
- multiméter Qian
- multiméter Joy-It
- multiméter Extech
- multiméter Gembird
- multiméter Testo
- multiméter Powerfix
- multiméter Biltema
- multiméter BaseTech
- multiméter REV
- multiméter Alecto
- multiméter Yato
- multiméter Velleman
- multiméter TFA
- multiméter Monacor
- multiméter Elro
- multiméter Fluke
- multiméter Uni-T
- multiméter Metrix
- multiméter Abus
- multiméter Megger
- multiméter Testboy
- multiméter Sonel
- multiméter Wiha
- multiméter Schneider
- multiméter Kyoritsu
- multiméter Brandson
- multiméter Stanley
- multiméter Silverline
- multiméter Rigol
- multiméter Projecta
- multiméter Multimetrix
- multiméter Weidmüller
- multiméter Laserliner
- multiméter Appa
- multiméter Amprobe
- multiméter Brennenstuhl
- multiméter Ferm
- multiméter Tacklife
- multiméter Somogyi
- multiméter Profile
- multiméter Steren
- multiméter Perel
- multiméter Flir
- multiméter Proline
- multiméter Hager
- multiméter Topcraft
- multiméter Clas Ohlson
- multiméter Plieger
- multiméter Jung
- multiméter Etekcity
- multiméter Cablexpert
- multiméter Greenlee
- multiméter Högert
- multiméter Wago
- multiméter Bruder Mannesmann
- multiméter Keithley
- multiméter Metrel
- multiméter Digi-tool
- multiméter Skandia
- multiméter Elma
- multiméter Hubinont
- multiméter Kewtech
- multiméter Strex
- multiméter Mastech
- multiméter MBS
- multiméter MGL Avionics
- multiméter PCE Instruments
- multiméter Micronta
- multiméter CEM
- multiméter Horex
- multiméter Cosinus
- multiméter Kurth Electronic
- multiméter Testec
- multiméter IWH
- multiméter Weltron
- multiméter Sanwa
- multiméter Rohde & Schwarz
- multiméter EEVBlog
- multiméter Kingcraft
- multiméter HT Instruments
- multiméter Caltek
- multiméter Elworks
- multiméter Bearware
- multiméter Noyafa
Legújabb útmutatók multiméter
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
28 Március 2025
26 Március 2025
14 Január 2025