Használati útmutató Beats Powerbeats 3 Wireless

Beats fejhallgató Powerbeats 3 Wireless

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Beats Powerbeats 3 Wireless (7 oldal) a fejhallgató kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
USER GUIDE and TROUBLESHOOTING
Set up and use your Powerbeats3 Wireless
earphones
1.
Turn on
Press and hold the power button for 1 second to turn your earphones on or off.
2.
Set up
If the indicator light on your earphones turns on but doesn't flash, your earphones have
already been set up with a device. In that case, follow the steps to connect to a different
device.
If you have an iPhone with iOS 10, follow these steps. When you set up your earphones
in this way, they set up automatically with your other devices that are signed into iCloud
and using iOS 10, macOS Sierra, or watchOS 3.
1. Hold your earphones next to your unlocked iPhone.
2. Press the power button on your earphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the
power button on your earphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have some other Bluetooth device, follow these steps to pair your earphones with
that device:
5. Press the power button for 5 seconds. When the indicator light flashes, your
earphones are discoverable.
6. Go to Bluetooth settings on your device.
7. Select your earphones from the list of discovered Bluetooth devices.
3.
Connect to a different device
Your earphones automatically reconnect to the last device you used with them. To
connect to a different device, follow these steps.
iPhone, iPad, or iPod using iOS 10:
1. Open Control Center by swiping up from the bottom edge of the screen.
2. Swipe to the side in Control Center to show the Now Playing card.
3. Tap the device name in the corner of the card, then choose your earphones from
the list of playback devices. If you don't see your earphones, follow the steps for
all other devices, below.
All other devices:
4. Go to Bluetooth Settings on your device. On your Mac, you can just click the
Bluetooth icon in the menu bar.
5. Select your earphones from the list of Bluetooth devices. If you don't see your
earphones after a few seconds, press and hold the power button for 5 seconds.
4.
Charge
Plug your earphones into a power source using the included micro USB cable. Your
earphones provide up to 12 hours of playback from a full charge, and up to 1 hour of
playback from a 5-minute charge.
When your earphones are turned on and set up, the LED indicator light on the left
earphone shows how much listening time is left:
o White: Up to 12 hours left
o Red: Less than an hour left
o Blinking red: Needs to charge
5.
Control
To control audio playback, use the center button on the RemoteTalk cable:
o Press once to play or pause audio playback.
o Press twice to skip to the next track. Press three times to skip backward.
o Press twice and hold on the second press to scan forward through a track. Press
three times and hold on the third press to scan backward through a track.
To control playback volume, use the volume buttons on the RemoteTalk cable. To
control call volume, use the volume controls on your phone.
o Press and release the volume up button, or press and hold to increase volume
continuously.
o Press and release the volume down button, or press and hold to decrease volume
continuously.
To control phone calls, use the center button on the RemoteTalk cable:
o Press once to answer or end a call.
o Press once to answer a second incoming call and put the first call on hold. When
two calls are active, this switches between calls.
o Press and hold for 1 second to reject an incoming call.
o Press twice to stop listening through your earphones and send the call to the
phone.
To activate Siri on your iOS device or the voice-command feature on another device,
press and hold the center button on the RemoteTalk cable until you hear a chime, then
say what you need.
6.
Reset
0. Hold down these buttons for 10 seconds:
Power button
Volume down button
1. When the indicator light flashes, release the buttons. Your earphones are now
reset and ready to be set up with your devices again.
7.
Update
Your earphones are automatically kept up to date when they're set up with an iPhone
using iOS 10.

Termékspecifikációk

Márka: Beats
Kategória: fejhallgató
Modell: Powerbeats 3 Wireless

Szüksége van segítségre?

Ha segítségre van szüksége Beats Powerbeats 3 Wireless, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók fejhallgató Beats

Beats

Beats Powerbeats Pro - configureren iOS Útmutató

5 Október 2024
Beats

Beats Tour 2 Útmutató

28 Augusztus 2024
Beats

Beats Beats X Útmutató

5 Augusztus 2024
Beats

Beats Powerbeats 3 Wireless Útmutató

31 Július 2024
Beats

Beats Powerbeats 2 Útmutató

30 Július 2024
Beats

Beats Solo3 Wireless Útmutató

29 Július 2024
Beats

Beats Powerbeats Pro Útmutató

28 Július 2024
Beats

Beats Heartbeats Útmutató

15 Július 2024
Beats

Beats Powerbeats Útmutató

14 Július 2024
Beats

Beats urBeats 3 Útmutató

11 Július 2024

Útmutatók fejhallgató

Legújabb útmutatók fejhallgató

Anchor Audio

Anchor Audio PRO-540/1D3S Útmutató

6 Április 2025
Trust

Trust Nouna 25277 Útmutató

3 Április 2025
PowerLocus

PowerLocus P2 Útmutató

3 Április 2025
Sennheiser

Sennheiser RS 120-W Útmutató

2 Április 2025
Celly

Celly SHEER Útmutató

2 Április 2025
Behringer

Behringer SD251-CL PRO Útmutató

1 Április 2025
Celly

Celly PC2USBCEARPIN Útmutató

1 Április 2025
Celly

Celly Ultrasound Útmutató

1 Április 2025
Celly

Celly UP600 Útmutató

1 Április 2025
Celly

Celly Linein35 Útmutató

1 Április 2025