Használati útmutató Bauknecht wt 1530
Bauknecht
Was/Droogcombi
wt 1530
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bauknecht wt 1530 (21 oldal) a Was/Droogcombi kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/21
23
QUICK REFERENCE GUIDE GB
BEFORE USING THE APPLIANCE FOR THE FIRST TIME:
• FOLLOW THE “INSTALLATION INSTRUCTIONS”.
• REMOVE THE TRANSIT BOLTS BEFORE USING THE MACHINE FOR THE FIRST
TIME.
• First wash cycle without laundry:
1. Turn on the water supply tap.
2. Close the door.
3. Pour a small amount of detergent (approx. 30 ml) into the detergent dispenser.
4. Select a short programme (see programme chart).
5. Press the “ON/OFF” button.
The “Power on” indicator shows that the appliance is switched on.
This will remove any water remaining in the machine from the manufacturer's test run.
24
GB CONTENTS
INSTALLATION INSTRUCTIONS Page 25
APPLIANCE AND ACCESSORIES Page 29
CHILD SAFETY DEVICE Page 29
PROTECTING THE ENVIRONMENT Page 30
SAFETY INSTRUCTIONS Page 30
MOVING AND TRANSPORTING THE APPLIANCE Page 30
WASHING - PREPARING THE LAUNDRY Page 31
WASHING - DETERGENT AND ADDITIVES Page 32+33
WASHING - DYEING AND BLEACHING Page 33
WASHING - SELECTING THE PROGRAMME /
PROGRAMME START Page 33
WASHING - SELECTING SPECIAL OPTIONS Page 34
WASHING - PROGRAMME SEQUENCE INDICATOR Page 34
WASHING - DOOR LOCK / PROGRAMME END Page 35
WASHING - PROGRAMME RESELECTION Page 35
DRYING - GENERAL INFORMATION Page 35+36
DRYING - PREPARING THE LAUNDRY Page 36
DRYING - DRYING PROGRAMMES Page 36
DRYING - SELECTING THE PROGRAMME Page 37
DRYING Page 38
DRYING - RESELECTING / INTERRUPTING THE PROGRAMME Page 38
DRYING - COLD PHASE / PROGRAMME END Page 39
REMOVING THE FILTER / DRAINING RESIDUAL WATER Page 40
CARE AND MAINTENANCE Page 41
TROUBLESHOOTING GUIDE Page 42+43
AFTER-SALES SERVICE Page 43
25
TRANSIT BOLTS
The appliance is fitted with transit bolts to
prevent internal damage while it is being moved.
Before using the appliance the transit bolts
MUST be removed (fig. 1).
1. Slacken the bolts with the spanner supplied
(Fig. 2).
2. Remove by hand.
3. Hold each bolt head and pull the bolts
complete with plastic spacer through the
wide part of the holes.
4. Seal the resulting holes using the plastic
caps supplied. Insert the caps into the large
aperture in the direction of the arrow and
push in the narrow groove until it clicks
(Fig 3).
5. Retain transit bolts.
Note:
The transit bolts must be fitted prior to the
appliance being moved:
•Pry up the plastic caps with a screwdriver,
slide them out against the direction indicated
with the arrow and remove them.
•Refit the transit bolts in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3
Termékspecifikációk
| Márka: | Bauknecht |
| Kategória: | Was/Droogcombi |
| Modell: | wt 1530 |
Szüksége van segítségre?
Ha segítségre van szüksége Bauknecht wt 1530, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Was/Droogcombi Bauknecht
30 Június 2024
Útmutatók Was/Droogcombi
- Was/Droogcombi Beko
- Was/Droogcombi Whirlpool
- Was/Droogcombi Grundig
- Was/Droogcombi Candy
- Was/Droogcombi Bosch
- Was/Droogcombi Indesit
- Was/Droogcombi Zanussi
- Was/Droogcombi Hoover
- Was/Droogcombi Siemens
- Was/Droogcombi Privileg
- Was/Droogcombi Hotpoint Ariston
- Was/Droogcombi Luxor
- Was/Droogcombi Zanussi-electrolux
Legújabb útmutatók Was/Droogcombi
16 Január 2025
22 Augusztus 2024
22 Augusztus 2024
22 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
20 Augusztus 2024
17 Augusztus 2024
3 Augusztus 2024