Használati útmutató Avid S1

Avid keverőpult S1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Avid S1 (40 oldal) a keverőpult kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/40

Avid S1 Guide

Installation and Overview

Legal Notices

For a current and complete list of Avid trademarks visit: http://www.avid.com/legal/trademarks-and-other-notices

Bonjour, the Bonjour logo, and the Bonjour symbol are trademarks of Apple Computer, Inc.

Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.

This product may be protected by one or more U.S. and non-U.S. patents. Details are available at www.avid.com/patents.

Product features, specifications, system requirements, and availability are subject to change without notice.

Guide Part Number 9329-66103-00 REV A 12/19

Safety Compliance

Safety Statement: (Model #: 9100-65814)

This equipment has been tested to comply with USA, Canadian, EU and International safety certification standards: UL 60950-1 2nd edition, CAN/CSA C22.2 No.

60950-1-07; 2nd edition, EN 60950-1:2006 /A11, /A1, /A12, /A2, IEC 60950-1:2005/A1, /A2, UL 62368-1, Second Edition, CAN/CSA 62368-1-14, EN 62368-1:2014 /A11

and IEC 62368-1:2014 (Second Edition)

Avid Technology Inc., has been authorized to apply the appropriate NRTL mark on its compliant equipment.

Power Safety Input Rating

Avid S1: 12Vdc, 2.8A

Warning

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this equipment near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce heat.

9) Only use attachments/accessories specified by the manufacturer.

10) Only perform the services explicitly described in the install and or user manual. For services or procedures not outlined in the install or user manual, speak with au-

thorized service personnel.

11) Refer all servicing to qualified service personnel. Servicing is required when the equipment has been damaged in any way, such as power-supply cord or plug is dam-

aged, liquid has been spilled or objects have fallen into the equipment, the equipment has been exposed to rain or moisture, does not operate normally, or has been

dropped.

12) For products that are a Mains powered device:

The power inlet is the main disconnect device and should remain accessible. Disconnect the power cord before servicing the unit.

Protect power cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the equipment.

Unplug this equipment during lightning storms or when unused for long periods of time.

Warning! To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

This unit may be provided with a power supply cord set suitable for 120V AC input only (for U.S.A.and Canada). For other than U.S.A. and Canada, a qualified person

must provide for use with this unit, an appropriate, approved power supply cord set which is in compliance with the end use country requirements and has a minimum

cross-sectional area of 1.0mm2.

13) For products containing a lithium battery:

Warning! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

14) For products with a power switch:

It should remain accessible after installation.

15) The equipment shall be used at a maximum ambient temperature of 40° C and maximum altitude of 2000m.

16) For products with an operator-accessible fuse:

CAUTION: For continued protection against risk of fire, replace only with same type and rating of fuse.

ATTENTION: Pour ne pas compromettre la protection contre les risques d'in- cendie, remplacer par un fusible de même type et de même caractéristiques nom- inales.

17) For products that are not rack-mountable: Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart

is used, use caution when moving the cart/equipment combination to avoid injury from tip-over.

