Használati útmutató AVerMedia Game Capture HD II

AVerMedia nincs kategorizálva Game Capture HD II

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AVerMedia Game Capture HD II (75 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/75
Italiano
English
Français
Deutsch
Italiano
Español
Português
User Manual
Game Capture HD II
C285
i
European Community Compliance Statement
Class B
This product is herewith conrmed to comply with the requirements set out in the Council Direcves on the
approximaon of the laws of the Member States relang to Electromagnec Compability Direcve (EMC) 2004 /
108/EC, Low Voltage Direcve (LVD) 2006/95/EC and Energy-related Products Direcve (ErP)
2009/125/EC.
Responsible manufacturer:
AVerMedia Technologies, Inc.
No. 135, Jian 1st Rd.,Zhonghe Dist., New Taipei City 23585, Taiwan
TEL: +886-2-2226-3630
European Community contact:
AVerMedia Technologies Europe B.V.
Kwartsweg 50, 2665 NN, Bleiswijk, The Netherlands
Technical Support: hp://www.avermedia.com/avertv/Support/
FCC Compliance Statement (United States)
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operaon.
Federal Communicaons Commission Statement
NOTE- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not
occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be
determined by tuning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
CAUTION ON MODIFICATIONS
To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed in
computer equipment cered to comply with the Class B limits. All cables used to connect the computer and peripherals must
be shielded and grounded. Operaon with non-certied computers or non-shielded cables may result in interference to radio or
television recepon.
Changes and modicaons not expressly approved by the manufacturer or registrant of the equipment can void your authority
to operate the equipment under Federal Communicaons Commission rules.
ii
Responsible manufacturer:
AVerMedia Technologies, Inc.
No. 135, Jian 1st Rd.,Zhonghe Dist., New Taipei City 23585, Taiwan
TEL: +886-2-2226-3630
USA Ofce contact:
AVerMedia Technologies U.S.A.
47358 Fremont Blvd., Fremont, CA 94538
Technical Support: hp://www.avermedia.com/avertv/Support/
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The mark of Crossed-out wheeled bin indicates that this product must not be disposed of with your other
household waste. Instead, you need to dispose of the waste equipment by handing it over to a designated
collecon point for the recycling of waste electrical and electronic equipment. For more informaon about where
to drop o your waste equipment for recycling, please contact your household waste disposal service or the shop
where you purchased the product.
Baery Safety Informaon
Use of carbon-zinc baery for remote control is strongly recommended.
Use of other types of baeries, such as alkaline or rechargeable (nickel-cadmium), may cause baery current overload or
baery leakage and corrosion which can damage the remote control.
Store the baeries in a cool dry place.
Do not dispose of used baeries in domesc waste. Dispose of baeries at special collecon points or return to point of
sale if applies.
Remove the baeries during long periods of non-use. Always remove exhausted baeries from the remote control. Baery
leakage and corrosion can damage this remote control, dispose of baeries safely.
Do not mix old and new baeries.
Do not mix dierent types of baeries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Do not dispose of baeries in a re. The baeries may explode or leak.
Never short circuit the baery terminals.
ICES-003 (Canada)
CES-003 Issue 5 Class B: C285
GOST-R Cercaon (Russia)
№ РОСС TW. AГ98.B06472
Срок действия с
14 02. .2013 . гпо 13 02.2015 г
AГ98
English-2
Thank you for purchasing the Capture Box. Please read this user manual carefully to ensure proper use
of this product We recommend you to keep it for future reference. .
Introduction
The , a stand-alone video capture box specially designed for TV gamers, allows you to Capture Box
capture HD content up to 1080p from various video game consoles, such as PlayStation
®3 Xbox 360 ,
and Wii U.
The records HD gameplays directly to your hard disk drive (HDD) for later viewing and Capture Box
further editing, eschewing the hassle setting up a PC nearby your TV set. of
Most attractively, the -press capture button allows you to instantly grab high score screen one and
record your exciting gameplay footage with nearly no effort. The Capture Box can record from either
HDMI (without HDCP protection) or Component Video at up to 1080p.
Other than that, the can pair up with the dedicated app GameMate, which turns your Capture Box
smartphone into a second screen remote controller. You can view capture and uploading status on the
screen of your smartphone.
Chapter 1 Package Contents
Please confirm that the package contains the following items. If any of the package contents are missing
or damaged, please contact the distributor immediately.
Game Capture HD II
Power Adapter
Power Adapter Outlet Module
English
English-3
HDMI Cable
User Manual
Quick Guide
Remote Control (Batteries Included)
The accessories that come with the package may slightly vary depending on different sales regions.
T is made for record and capture media materials that are gally owned or licensed by the he Capture Box le
user only. Any violation of copyright or other intellectual property rights is not allowed. s
AVerMedia regularly releases the latest version of firmware for the . Having the latest Capture Box
firmware enhances the functionality of the To download the latest firmware file, please go to Capture Box.
/www.avermedia.com and then enter the model name in Product Search field. Firmware file is available on
the product information page (See Chapter 6 for details).
If problems are encountered , refer to FAQ section at for further troubleshooting.
www.avermedia.com
English-5
Chapter 2 The Unit Parts
2.1 Front Panel
The button panel found on the front of the unit provides quick access to commonly used functions.
# Buttons
Descriptions
1
Record
Press to start stop recordin / g.
Hold down the button for 4 seconds to force shut down the Capture Box
2
Power
Press to turn the unit on
2.2 Infrared Sensor
When using the remote control, aim it at the infrared (IR) sensor located the front panel of the unit. at
The remote control must be held at an angle within 30 degrees perpendicular to the IR sensor to
function correctly. The distance between the remote control and the sensor should not exceed 6 meters
(20 feet).
English- 10
#
Buttons
Descriptions
1
Press to turn the unit on / into stand-by mode.
2
Press to access the main menu. Press again to exit .
3
Press the navigation keys to move among options.
Press to confirm a selection. OK
Press to mark/ unmark segment in post- editing. OK
4
Press to play the latest recorded file or view the last captured image.
5
Press to start / stop recording.
6
Press to start playing the selected file.
Press to play the file at normal (1x) speed when slow motion, rewind, or
fast-forward is active.
7
Press to stop the playback.
Press to stop the recording.
8
Press to rewind (2x, 4x, 8x, 16x, 32x).
9
Press to return to the previous page.
10
Press to display the video/snapshot quality adjustment screen. Press again to
exit.
11
Press to safely remove external hard disk in Menu
(Follow the on-screen instruction)
12
(Follow the on-screen instruction)
13
(Follow the on-screen instruction)
14
Press to switch between Component and HDMI sources.
15
Press to display the on-screen information, including mode, source and audio
sources.
16
Press to exit the current page and return to the previous page.
17
Press to take a snapshot during gameplay or video playback .
English- 11
18
Press to pause the playback. Press to res playback. OK or ume
Press to pause the recording.
19
Press to play the video in slow motion (1/2x). Press again to enter
frame- - frame mode (See Chapter 5 for details). by
20
Press to fast-forward (2x, 4x, 8x, 16x, 32x).
21
Press to go to the next page.
22
Press to delete the selected files.
23
Press to display the disk information. Press again to hide it.
English- 13
Estimated recording duration for different video quality settings :
HD 1080p
Optimal
(20 Mbps)
Good
(18 Mbps)
Maximum Recording
Length (15 Mbps)
1TB
100 hrs
110 hrs
125 hrs
2TB
200 hrs
220hrs
250hrs
H P D 720
Optimal
(20 Mbps)
Good
(15 Mbps)
Maximum Recording
Length (10 Mbps)
1TB
100 hrs
125hrs
200 hrs
2TB
200 hrs
250 hrs
400hrs
H D 1080i
Optimal
(15 Mbps)
Good
(12 Mbps)
Maximum Recording
Length (10 Mbps)
1TB
125 hrs
150 hrs
200 hrs
2TB
250 hrs
300 hrs
400 hrs
S i(576i)/480P(576P) D 480
Optimal
(7.5 Mbps)
Good
(5 Mbps)
Maximum Recording
Length (3 Mbps)
1TB
250 hrs
400 hrs
650 hrs
2TB
500 hrs
800 hrs
1300 hrs
*Recording with higher video quality takes up more disk space.
Video Quality
Storage Capacity
Video Quality
Storage Capacity
Video Quality
Storage Capacity
Storage Capacity
Video Quality
English- 14
4.2 Hardware Installation
Please follow the steps below to properly connect the and your TV video game consoles. Capture Box /
Step 1
Check the Connection of Your Game Consoles and TV
Make sure all cables connecting the Capture Box to your game consoles and TV are well-connected.
Doing so will save you a lot of time from locating problems later. First, please check the connection of
your game consoles. Second, make sure that the connection to TV is good.
Step 2
Connect the Device to Your Wii U / Xbox 360 Using HDMI Cable
Connect one end of the HDMI cable to the HDMI IN port on the rear of the device and the other end to
the HDMI OUT port on your Xbox 360/ Wii U .
Connect the Device to Your PlayStation 3 / Wii Using Component AV Cable
Plug the green, blue, red connectors into the COMPONENT VIDEO IN port and white and red
connectors into the AUDIO IN port on the rear of the device. Then, plug the other end to your game
console.
If you would like to install internal hard drive, install it before turning on the . Capture Box
Make sure that the cables are firmly connected and that neither of the cables is loose. If any of the cables are
loose or disconnected, there may be a loss of signal or screen color problems.
English- 15
Step 3
Connecting the Device to Your TV Using HDMI Cable
Connect one end of the HDMI cable to the port on the rear of the device and the other end HDMI OUT
to the HDMI IN port on your TV.
Step 4
Power on Your Game Console
Turn on your game console.
Component and Wii Component Cable is NOT Included. Please purchase “PlayStation 3 AV Cable
separately if needed.
English- 16
Step 5
Install and Connecting the Power Adapter
Slide the Power Adapter Outlet Module into the groove on the Power Adapter. Connect the Power
Adapter connector to the port on the rear of the device. Then plug the power adapter to a wall -DC IN
outlet.
English- 17
Step 6
Connecting to the Network
To automatically obtain time and other information, you need to connect the Capture Box to an Ethernet
LAN. Make sure the L wire is well-connected before you continue to the next step. Meanwhile, a AN
router which supports DHCP IP network is recommended for you to pair up the Game Capture HD II
with your iPhone.
Step 7
Plug in USB Hard Drive/ HDD
Connect your portable USB hard drive or hard disk drive (HDD) to the USB port on the front of the
Capture Box. Please make sure you use an NTFS format USB hard drive or hard disk drive (HDD).
Under the condition that no hard drive is connected to the device, the power light will continue to flash.
Therefore, it is advised that you plug in USB hard drive or hard disk drive (HDD). Please see Chapter
4.3.2 for further details about installing an internal hard drive.
It is recommended that you connect the before running first time setup. Capture Box
English- 19
Step 9
Check Video on TV screen
Make sure that there is game console video content displayed on TV screen.
Connecting the Device to Your Microphone and Headset
Plug in the microphone connector into the MIC Input port on the front panel of the device. Same as
microphone, plug in the headset connectors into the headphone and microphone ports on the front
panel of the device. This procedure is only needed when you intend to add commentary to your
gameplay video. Please refer to Chapter 6 for details.
When headphone is connected to the , the gameplay will be muted as sound will come out from Capture Box
the headphone.
Hereafter a headset refers to the device you use to record while headphone refers to the headphone port on
the front panel of the Capture Box.
If your TV is not displaying video properly, please check the followings:
Supported resolutions vary depending on the TV in use. For details, please refer to the documentation that
comes with your TV.
Power off Capture Box and then make sure that the device is connected properly and with the proper cables .
If there is still no video signal on TV, refer to FAQ section at www.avermedia.com for further troubleshooting .
English- 20
4.3 Storage Device Installation
The supports 2.5 inch internal hard drive and external USB storage device. You can save Capture Box
the recorded files and snapshots either the internal HDD or external one. to
Connect your portable USB hard drive to the USB port on the front of the Capture Box
4.3.1 USB Storage Device Insertion
4.3.2 HDD Installation and Removal
It is highly recommended to use a new unformatted hard drive or a hard drive formatted as NTFS file
system. The maximum supported storage capacity of the hard drive is 2TB.
Before installing removing the internal HDD, please disconnect the power supply from the to avoid or Capture Box
data loss.
Removing internal D immediately after powering-off may cause personal injury due to heat. Please wait until HD
the cools down completely (it takes approximately 10 minutes) before any attempt to remove it. HDD
It is highly recommended to use a NTFS format hard drive instead of a flash drive to minimize the risk of recording
failure.
To avoid any possible data loss, go to main menu and press [ of your remote control to safely remove the F1]
external storage disk before unplugging it from the . Capture Box
English- 24
Lift off the lid and set it aside.
Step 2
Removing the HDD
Pull the HDD out in the direction of the arrow. Then lift the HDD out of the slot.
Step 3
Replacing the HDD Lid
Place the HDD lid back and snap it into place.
English- 25
4.4 Setup Wizard
When the first time you power on the unit, the setup wizard appears. The following steps Capture Box
guide you through the initial configuration process.
Step 1
Setting up Language
When the welcome page appears, use ▲ ▼/to
select your preferred language ress . P OK to
confirm.
Make sure to install hard drive (internal or external) and to connect to the internet beforehand. a
For the first-time initialization, a short duration of black screen (approximately 20 seconds) is followed by
AVerMedia log The blinking green status light indicates that the is starting up. o. Game Capture HD II
Please wait until the welcome screen appears.
It is typical that after hard drive is formatted, the actual disk space of the drive would slightly less than its unformatted a be
capacity.
English- 27
Step 4 (1)
No Hard Drive Detected
If you have not yet installed storage device, any
install it before continuing the setup process.
Then press to go to the previous screen and
press to run disk checking process. OK
Step 4 (2)
Finishing Setup Wizard
Once a NTFS-formatted hard drive is connected, a
Settings Complete notice will be shown.
You can start to record and take snapshot right
away. Press to exit the wizard and start using OK
Capture Box. The game screen then appears.
Unplug the from the power supply before installing an internal HDD. Capture Box
Sometimes the connection test in Wizard will appear to be failed even though you have connected the RJ45
cable to the Capture Box. Go to Menu> Network> Network Settings> Manually Setup to set the network
manually.
English- 28
4.5 Video Output Settings for Game Consoles
The supports YPbPr / HDMI input resolution Capture Box up to 1080p.
Step 1
Power on your PlayStation 3 console.
On your console, go to Settings > Display
Settings > Video Output Settings.
Step 2
Select and confirm the Component/D-terminal
selection. Then your TV screen goes blank
immediately.
Now use your TV remote to switch the TV input
source to The screen then Component (YPbPr).
comes back on again.
4.5.1 Video Output Settings for PlayStation 3

Termékspecifikációk

Márka: AVerMedia
Kategória: nincs kategorizálva
Modell: Game Capture HD II

Szüksége van segítségre?

Ha segítségre van szüksége AVerMedia Game Capture HD II, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva AVerMedia

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva