Használati útmutató Avantco SL310

Avantco vágógép SL310

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Avantco SL310 (15 oldal) a vágógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/15
1 www.AvantcoEquipment.com
Models: SL309, SL310, SL312, SL512, SL713
09/2022
2 www.AvantcoEquipment.com
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you arenished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factory tted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
3 www.AvantcoEquipment.com
1. The units are designed to operate an alternating current (A.C) only. DO NOT CONNECT TO DIRECT CURRENT (D.C).
2. Please ensure that the power supply cord does not come into contact with hot surfaces.
3. If the supply cord is damaged, it must be replaced with a new cord assembly. (Available from the suppliers agent.)
4. The appliance must only be used for its intended purpose.
5. It is strongly suggested that the operators of this machine wear close tting clothes. It is essential when blade
maintenance or cleaning is undertaken that suitable hand protection gloves are used.
6. ALWAYS unplug the slicer before undertaking cleaning or maintenance of the unit.
7. These machines must be operated by trained personnel and should never be used by unskilled operators or children.
8. The blade must be replaced when it has reduced in size by 5mm.
LubriQuik food grade silicone spray lubricant is ideal for use on virtually any equip-
ment or machinery that makes contact with food, such as slicers, conveyor sys-
tems, bottling and canning machinery, bakery equipment, and dairy equipment.

Termékspecifikációk

Márka: Avantco
Kategória: vágógép
Modell: SL310

Szüksége van segítségre?

Ha segítségre van szüksége Avantco SL310, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók vágógép Avantco

Avantco

Avantco SL612A Útmutató

30 December 2025
Avantco

Avantco SL309 Útmutató

13 Augusztus 2024
Avantco

Avantco SL310 Útmutató

11 Augusztus 2024
Avantco

Avantco SL312 Útmutató

9 Augusztus 2024

Útmutatók vágógép

Legújabb útmutatók vágógép

Ovela

Ovela OVSAFSLCERA Útmutató

6 Január 2025
Royal Catering

Royal Catering RCAM-250 Útmutató

4 Január 2025
Royal Catering

Royal Catering RCES-215/12 Útmutató

1 Január 2025
CaterChef

CaterChef 537150 Útmutató

1 Január 2025
CaterChef

CaterChef 680433 Útmutató

1 Január 2025
Graef

Graef Sliced Kitchen S11000 Útmutató

1 Január 2025
Panduit

Panduit PBDCT Útmutató

30 December 2025
Berkel

Berkel MB7 Útmutató

29 December 2024
GOTIE

GOTIE GSM-160 Útmutató

29 December 2024
Globe

Globe SG13A Útmutató

29 December 2024