Használati útmutató AudioControl ACX-300.1

AudioControl hi-fi rendszer ACX-300.1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AudioControl ACX-300.1 (10 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/10

COMPACT HIGH POWER ALL-WEATHER MONO AMPLIFIER

Quick Start Guide

Features

• Compact High Power Mono Subwoofer Amplier

• High Current Design

• 1 x 300 Watts @ 2 Ohms, 1x175 watts @ 4 Ohm

• 12 dB/Octave Linkwitz-Riley Alignment Crossover

• GTO™ Signal Sense (Great Turn On)

• 2 RCA Inputs - switchable for Low and High Level signals

• Optional wired ACR-1 Remote Control for Output Level

• All-weather rated - IPX6 rated!

• Cage-free op-amps

ACX-300.1

Quick Start Guide

ACX-300.1

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as muers, silencers, exhaust

pipes, or other apparatus (including ampliers) that produce heat.

9. WARNING: Improper installation may lead to permanent injury or death.

Installation of the apparatus must be done with great care by qualied

personnel, to prevent damage to fuel lines, power and other electrical

wiring, hydraulic brake lines, and other systems, that might compromise

vehicle safety.

10. Provide +12V and Ground wiring of sucient size to ensure adequate

current to the amplier. For the ACX-300.4 this means 8 gauge wire or

thicker.

11. Use rubber grommets to protect wiring whenever passing wires through

metal openings or bulkheads.

12. Only use attachments/accessories specied by the manufacturer.

13. Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as the power

input terminals are damaged or objects have fallen into the apparatus,

does not operate normally, or has been dropped.

14. Fuses shall be replaced only with the correct type and fuse value, and

only when the apparatus is powered o.

15. Exposure to high sound pressure levels may lead to permanent hearing

loss. Take every precaution to protect your hearing.

The lightning ash with arrowhead symbol within an equilateral triangle

is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure, that may be

of sucient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the

appliance.

Caution: to reduce the risk of electric shock, do

not disassemble the apparatus, other than to

remove the top panel to access the controls.

There are no user-serviceable parts inside.

Refer servicing to qualied personnel.

Recycling notice: If the time comes and this apparatus has fullled its destiny,

do not throw it out into the trash. It has to be carefully recy-

cled for the good of mankind, by a facility specially equipped

for the safe recycling of electronic apparatii. Please contact

your local or state recycling leaders for assistance in locating a

suitable nearby recycling facility. Or, contact us and we might

be able to repair it for you.

1. Speaker Output – Connect these wires to your subwoofer using

the included water resistant harness. Speaker wire may then be

crimped or soldered onto the bare leads. Use a decent sized wire

gauge as this baby is powerful!

2. Power Input Terminal +12V & Ground – Connect these wires

to the +12V and Negative binding posts of the vehicle battery

via one of two included harness options. You may use either the

included water resistant harness, or the included harness kit to

terminate your own custom-length water-resistant harness. Use

quality insulated wiring of the recommended wire gauge, such as

wire gauge 8 or thicker.

3. Remote Power Input Wire – This wire connects to the 12V remote

trigger output of some head units and controls the on/o state of

the amplier. Alternatively, you can use the GTO™ feature of the

amplier so it will turn on when an speaker level signal is detected

at the RCA inputs.

4. Power LED - When the unit has been powered on, the LED will

glow warmly red

5. Input Level - Use this switch to specify which type of signal input

voltage type you are using - high is speaker level & low is RCA line

level.

Connection Features

REM

GND

+12V

OUTPUT

1 2 3 4 5 6 7 8 9 10 11 12 13

Termékspecifikációk

Márka:	AudioControl
Kategória:	hi-fi rendszer
Modell:	ACX-300.1

Szüksége van segítségre?

Ha segítségre van szüksége AudioControl ACX-300.1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hi-fi rendszer AudioControl

AudioControl EQL Útmutató

18 Augusztus 2024

AudioControl 2XS Útmutató

17 Augusztus 2024

AudioControl EQX Útmutató

17 Augusztus 2024

AudioControl DQ-61 Útmutató

14 Augusztus 2024

AudioControl LC-5.1300 Útmutató

14 Augusztus 2024

AudioControl The Epicenter Plus Útmutató

14 Augusztus 2024

AudioControl ACX-3.2 Útmutató

14 Augusztus 2024

AudioControl THREE.2 Útmutató

13 Augusztus 2024

AudioControl 6XS Útmutató

13 Augusztus 2024

AudioControl EQS Útmutató

13 Augusztus 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer

NEC NP01SW1 Útmutató

9 Április 2025

Klipsch ProMedia Ultra 2.0 Útmutató

6 Április 2025

Vaxis Atom 500 Útmutató

2 Április 2025

INKEE Benbox Útmutató

1 Április 2025

JL Audio SlamPak SLPK-CAN-SPYDER1 Útmutató

31 Március 2025

Teradek Bolt 10K Útmutató

29 Március 2025

Teradek Bolt 500 Útmutató

29 Március 2025

Teradek Cubelet 655 Útmutató

29 Március 2025

Teradek Cube Series Útmutató

29 Március 2025

Teradek Cube 725 Útmutató

29 Március 2025